VS 2010 Stadium Calculator Integer?

Sep 25, 2011

This is one of my first forms so I'm sure there is quite a bit wrong with it. It works to a good degree but my issue is, Although I'm asking and checking for an int. If I put say 1.1 in a field it still lets it go. I'm sure I'm missing something very easy but I've been messing with it for hours.

Public Class frmStadiumSeatingCalculator
Private Sub frmStadiumSeatingCalculator_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

[code].....

View 2 Replies


ADVERTISEMENT

VS 2010 Distance Calculator In VB 2010 Loop?

Nov 4, 2011

I can't get the loop to work. The calculator is suppose to show how far someone goes for each hour increment (i.e. if they punch in 3 hours, it should show a number for 1 hour, 2 hours and 3 hours; if they punch in 10 hours it should show a number for 1 hour, 2 hours, 3 hours....etc. up to ten hours, etc.) I can't get it to show anything except for the total number of hours traveled and total distance.

Private Sub DistanceButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DistanceButton.Click
Dim speedIsValid As Boolean

[Code]....

View 1 Replies

VS 2010 - How To Make A Calculator

Jun 5, 2011

How to make this calculator:2 Texboxes In first textbox is writeble (where user will write the version) The second textbox is notwriteble ( there will show the result)In the first textbox to make calculation of version.If user writes for example: 1.03.11 In textbox2 to display the calculation: 22656 If the user writes for example other version:1.05.50 In textbox2 to display the calculation:22895and the same way if user writes 1.03.24 or other numbers auto to calculate the versions, and if user writes a bad text in tetbox2 to display error: For example In textbox1 user writes text: omg In textbox2 shows : Error
Only if user writes number like this: 1.03.11 or other number will calculate it else to shows error

View 16 Replies

VB 2010 Distance Calculator Loop?

Nov 4, 2011

The calculator is suppose to show how far someone goes for each hour increment (i.e. if they punch in 3 hours, it should show a number for 1 hour, 2 hours and 3 hours; if they punch in 10 hours it should show a number for 1 hour, 2 hours, 3 hours....etc. up to ten hours, etc.) I can't get it to show anything except for the total number of hours traveled and total distance.

rivate Sub DistanceButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DistanceButton.Click
Dim speedIsValid As Boolean

[code].....

View 7 Replies

VS 2010 : Make A Rank Calculator?

Sep 8, 2011

VS 2010 : make a Rank Calculator?

View 2 Replies

Definitive ISO Week Calculator In VB VS Express 2010

Mar 16, 2012

I'm looking for a definitive, standard (i.e. certified as being correct or tested reasonably thoroughly) for calculating the ISO week from a date, in Visual Basic (i.e. to run in a Visual Studio Express 2010 Visual Basic project). I found some routines that were Visual Basic for Applications oriented; reliant on Excel environment, some things not present in Visual Studio Express 2010 Visual Basic: [URL]

View 1 Replies

Visual Basic 2010 Calculator Not Working

Sep 14, 2011

I am slowly learning to program in visual basic and just spent the past 5 hours trying to fix this but just cant.

View 8 Replies

VS 2010 - Adding Backspace Button On Calculator

Nov 29, 2010

I am making a calculator. I need a button that functions like a Backspace-button on a calculator. Erase the last inserted char, or what ever may work.
I use:
Button1
TextBox1

View 3 Replies

VS 2010 - Error - Create A Basic BMI Calculator App

Nov 16, 2010

I just switched to VS 2010 for Windows phone 7 developement... I am trying to create a basic BMI calculator app...This is what I have now...

CODE:

However I have these errors which are as below

Quote:

CODE:

Quote:

CODE:

Did I forget to declare something? This does not happens when I am using the divide and multiply in VS 2008.

Error Screenshot as attached below...

View 2 Replies

VS 2010 - How To Make Calculator Work To Use Only Keyboard

Aug 26, 2011

I'm new in the programming area and I'm having trouble making a calculator. My question is: How do I make the calculator work using only the keyboard, without the need of mouse.

I tried this:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs)
Me.KeyPreview = True
End Sub
Private Sub FlowLayoutPanel1_KeyDown(ByVal sender As Object, ByVal e
As System.Windows.Forms.KeyEventArgs) Handles RESULTADO.KeyDown
If e.KeyCode = Keys.NumPad0 Then
[Code] .....

It only works on the text box called Result. I want to know how do I make work in the whole Class, and if it is possible, to make it work on two different Classes without writing twice the same code.

View 6 Replies

VS 2010 Make A Game Statistics Calculator?

Jan 3, 2011

I want to make a game statistics calculator. For this I choose to make a XML database with the base stats of the characters.

I've made a small XML file in the VS2010 project with 1 class stats and made a list to 10 levels (to lazy atm to write all 85).

the XML looks like this:

<BASIC_CHARACTER_STATS>
<Levels>
<level id="1">1</level>

[Code]....

On the Form1.vb I've to combo boxes, 1 to display class names and 1 for levels.
Also have some Labels to display i.e. the base_STR number. But after trying random stuff to get it linked and closed VB to restart again because it was messed up too much

View 1 Replies

VS 2010 Making Calculator (for School Project)?

Jun 30, 2011

I am making a calculator for a school project, I want to have it so it looks similar to windows calc ( with one button for each number & only one text box),My code has a few blank spots but so far it is :

Public Class calc
Private Sub Btn1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Btn1.Click
IOBox.Text = IOBox.Text + "1"
End Sub

[code].....

View 5 Replies

VS 2010 - Append Text Method Calculator Code

Mar 15, 2011

I am coding a simple calculator and I need the textbox to show the previous entries when I enter them. I hear the best way to do this is by Append Text? For example I click 3 Then + The textbox will show "3+" etcetera.

View 1 Replies

VS 2010 Making A Calculator With 1 Textbox For Input And Answers?

Feb 5, 2012

so i am new to v basic and as you can see in the picture below that i have 2 textboxes just to put in them 2 numbers and then do mathematical calcualtions on them and a label up there that shows the answer so i wanted to make 1 textbox to type in the 1 st number then press the symbol for example + and then type the 2nd number and then press equal so the result is formed in the same textbox the only problem is idk how i searched google but i couldnt understand here is my source code

[Code]...

View 1 Replies

VS 2010 Wage Calculator Error For New VB2010 Student?

Dec 21, 2010

I'm having an issue trying to get a wage calculator to recognize an overtime formula. The calculator has to have the overall function of figuring the gross pay, Federal Tax Withheld (15%), and the net pay based on the hourly wage and hours worked for the week. The issue I am having is the wage * 1.5 entry (underlined) where it sates it is not an array or a method and cannot have an argument list. If anyone can take a look at this for me and guide me as to why this error keeps coming up and what I can do to make sure it doesn

View 36 Replies

VS 2010 Write Code With IF Statements For A Payroll Calculator?

Feb 2, 2012

I am trying to write code with IF statements for a payroll calculator. The first IF statement is getting a bit confusing. I have three text fields that I want to ensure have data before proceeding with the next set of code. This is the part I am not sure I am doing right.

IF IsNothing(txtHoursWorked.Text) OR
IF IsNothing(txtEmpName.Text) OR
IF IsNothing(txtHourlyPayRate.Text) Then

[code]....

View 6 Replies

VB 2010 Create A Calculator For Fuel Usage With Menu Items?

Jan 18, 2011

i am trying to create a kind of calculator for fuel usage with menus lemme show ya the code:

Public Class frmFuelCalc
Private Sub AboutFuelCalcToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AboutFuelCalcToolStripMenuItem.Click
MsgBox("Guru Software" & vbCrLf & "Fuel Calculator Version 1.0.0.0" & vbCrLf & " Copyright 2011 © " & vbCrLf & " Guru Software Design â„¢ All Right Reserved", MsgBoxStyle.Information, "Fuel Calculator")

[code]....

View 1 Replies

VS 2010 - Debug - Code For A Payroll Calculator - Gives Me My Own Error Message Box

Feb 3, 2012

I have written the below code for a payroll calculator. When I run the program, it gives me my own error message box no matter if my number of hours fall within the 5-60 hours range as I have stipulated. Is there something wrong with my code? (well, obviously there is something wrong--I just cant find it!)

CODE:

'This program calculates the Gross and Net Pay as well as the Tax Deduction amount of an employee's wages when given the input of Employee Name, Tax Rate, Hours Worked, and Hourly Pay Rate.

CODE:

View 5 Replies

Develop A Calculator That Will Determine Prices For Candy In VISUAL BASIC 2010?

Sep 29, 2010

Sweet candy store currently has a special offering of heart shaped candy. It comes in two sizes: small and large. The company sells the large one for $29.50 and the small for $16.25.Design an application to calculate how much a costumer owes. When the user clicks the "Calculate" button, the program gets the number of large and small chocolate hearts ordered from the textboxes, calculates and displays the extended price for each type of the chocolate in a label. The program also calculates the weight of the chocolate to determine the shipping cost, displays the total weight, the shipping cost and the final total due. The large chocolate weighs 4 pounds 10 ounces, and the small one weighs 2 pounds 14 ounces. Shipping cost is 35 cents per pound and 3 cents for each additional ounce. Display all dollar amounts except the final total due with 2 decimal places. Display the FINAL TOTAL DUE with a leading dollar sign and 2 decimal places. Be sure to also include a CLEAR button that will remove all inputs/outputs from the form, and an EXIT button. Define the CALCULATE button as the accept button and the EXIT button as the cancel button.

View 4 Replies

VS 2010 - How To Get Two Digit Integer Always

Nov 7, 2010

I'm populating a checkedlistbox with this loop.
Dim week As Integer
For week = 1 To 51 Step 2
CheckedListBox1.Items.Add(week)
Next
And get this result 1 3 5 7 9 11 13 etc.
This is how I want it 01 03 05 07 09 11 13 etc.

View 1 Replies

VS 2010 Can't Parse 'h1' To Integer?

Jun 2, 2011

I am trying to parse several strings to integers where I both tried cINT(string) and Integer.Parse(string) but it seemed to fail at the string 'h1', I think I need to use substring for this, but as the input can be different decided by the user, it is kinda impossbile to use substring, as I do not know how to locate the integer in the string..

View 10 Replies

VS 2010 Integer With Members?

Jun 21, 2012

For my ToDo list I have these data: Activity, date, start time, end time.I have 2 listboxes. The first listbox stores the activity and date.The 2nd listbox stores activity,date, start time and end time.With a button I can hide/show the 2nd listbox.

View 7 Replies

VS 2010 - What Is An Integer And A String - Code An Own Sub

Mar 8, 2012

Just started programming with visual basic 2010 after programming a lot with vbs (Visual Basic script) it looks a lot like each other but there are a couple of differnces so here are a couple of questions.

1. What is a integer and what is a string?

2. Can i code an own sub? so it works at all times and not only when i " do something" (press a button or something like that)

for example: if progressbar1.value = 10 then msgbox " well done" now i can only add this line when i connect it to a button or something but i want to connect it to all the lines.

3. whats wrong with this line?: WebBrowser1.Navigate [URL]

View 7 Replies

VS 2010 : Convert The C Value / Hex Or Integer Value Of 0x00000000L?

Jan 21, 2010

convert this C value for me?

Value : 0x00000000L

View 5 Replies

VS 2010 : Display Error If Not Integer?

Apr 19, 2012

I am taking a business application development class right now and am learning Visual Basic. One of my homework assignments is to calculate the grade needed on the final exam to get an A in the class depending on the midterm score entered by the user. My question is how do I display an error if the value entered is a letter instead of an integer?

Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim intMidterm, intFinal As Integer
intMidterm = CInt(TextBox1.Text)

[code]....

View 2 Replies

VS 2010 Get ImageList Image As Integer?

Apr 5, 2011

I need to get the integer of an image which is located in an imagelist. Dim _blue As Integer = CInt(frm_main.Imagelist1.Images.Item(1)), but image can't be converted to integer.

View 1 Replies

VS 2010 Integer Condition Check?

Dec 1, 2011

i'm starting to learn VB, i've wrote a few little programs following the books and internet resources, so far so good until now, i have to check a range of double integers(e.g. 170-50) if the left integer is == 170 and the right integer is == to 50 then you profit.i have to do this about 200 times but i just need a litow to get started, i've searched for about 4 hrs and read for about 5 and still nothing.

View 2 Replies

VS 2010 Search Datagridview Using Integer?

Mar 11, 2011

Dim table As DataTable = par.Tables(0)table.DefaultView.RowFilter = String.Format("Patient_Number = '{0}'", txtPatientID.Text) txtPatientID.DataBindings.Clear()txtPatientID.DataBindings.Add("Integer", table, "Patient_Number") DataGridView1.DataSource = table

However I get an error:Cannot bind to the property 'Integer' on the target control.Parameter name:PropertyName

View 1 Replies

VS 2010 Store An Integer Efficiently?

Nov 19, 2011

Basically I want to store an integer efficiently. At the moment I'm using Button1 Click' Or whatever I need it for Label1.text+0 But to do this I need to add in another Label and set it to visible.

View 6 Replies

VS 2010 Anyway To Customize A Variable To Use Both Integer And Boolean Value?

Aug 19, 2011

Is there anyway to customize a variable to use both an integer and a boolean value?For example. I am kind of making a simulation engine and using GDI as a visual aid, I am generating a grid of tiles for objects to be displayed, but I do NOT want to repaint all the tiles just the ones that have changed, so that I can save fps.So I thought if I could set a variable for the "tile number", "how many objects there are on a tile", and a boolean value for whether or not the tile needs repainted.[code]

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved