I have a checkbox named chkFactureren.When I want to save the value of that checkbox to my ms access 2003 DB I get the error: oledbexception was unhandled by user code - data type mismatch in criteria expression
cmdUpdate.Parameters.AddWithValue("@Factureren", CBool(Me.chkFactureren.Checked))
I have login system where once logged in, there is a global variable which holds the users ID. In another form, I have an SQL update which updates rows in the user table. So my dilemma is this: When I try to update it either updates the first user only, or all users.
The SQL I have :
Dim Update As String = _
"Update User Set field1=?, field2=? field3=?"
What I would like is...
Dim Update As String = _
"Update User Set field1=?, field2=? field3=? where ID =?"
However this doesn't work.
In the following fragment I want to set vID2 to NULL (and not to 0) if mID2 is an empty string. How do I do this? There is apparently no OleDbType.Null
cn.Open()
strTemp = "INSERT INTO tbShips (vNew_b, vID, vID2) VALUES(?, ?, ?)"
MyCommand.Connection = cn
MyCommand.CommandText = strTemp
With MyCommand.Parameters
[Code]...
I have run into an issue using an OLEDB Parameter and am not sure how or why it is doing it. I have the following property setup in my program:
[Code]...
I have a service that runs under local system that I need to have execute an external .exe using alternate credentials. Using the code I have posted here, I get the error "Error-:-The parameter is incorrect" and the target site is "Boolean tartWithCreateProcess(System.Diagnostics.ProcessStartInfo)"Here is the code:
Try
Dim AuditProcess As New Process
Dim p As System.Security.SecureString = New System.Security.SecureString
[code]....
I am inserting data from vb.net to oracle but I am unable to insert datetime except date into oracle. I want to insert date and also time of entry into database:
cmd.Parameters.Add(":STARTING_DATE", (OleDb.OleDbType.[Date].))
cmd.Parameters(":STARTING_DATE").Value = DateTime.Now()
cmd.Parameters(":STARTING_DATE").Value = txtStartDate.Text
This is driving me mad! This is my code and I have attached my parameters below with my error. What on earth is wrong.
[Code]...
i wrote a module of a connection to DB with OleDB and the 'sub UpdateClients' doesn't work, the DB don't update.what's missing or wrong?this line -> "daClient.Update(dsClient, "CLUB_CLIENT")" -> dosen't work (sorry about my english, i'm not so good)the database doesn't update after this line (like i expected) what's missing in my code? i want that my DB will Update. "txtid" will be in "ClntId" from my tables.
Module mdlDB
Const CONNECTION_STRING As String = _
"provider= Microsoft.Jet.OleDB.4.0;Data Source=DbHalf.mdb;mode= Share Deny None"
[code]...
I'm working in vb.net creating an asp.net web application. I have an SqlDataSource and a GridView on my page:
<asp:SqlDataSource ID="msgUnread" runat="server"
ConnectionString="<%$ ConnectionStrings:edinsec %>"
[code]....
As you can see I was playing with WithEvents but that didn't seem to help. In the above code all I was trying to get was some kind of reaction to the clicking of a checkbox - but nothing happens (no errors, either).
I have an application to re-sequence some items based on a an alphabetical ordering of the items from another table. I couldn't create an update statement to update the database when I pulled the information by a join query, So I pulled down both tables into a dataset with an XML Schema description where the two are related by the itm_id key as in the database. I then have two datagrids one with the items and one with the bound to the relationship this allows only the records associated with the itm to be displayed in the datagrid, I then run a loop that changes to sequence number for each corresponding record,this all works fine but then I go to update the back end database.
The update from the dataadapter executes successfully, but then if I reload the dataset from the database back end I find that the update did not actually update the records on the back end. The only record that was updated was the very first record which updated with a 0 then all the others did not take, I have re-run it several times and they will not take.
Me.Cursor = cursors.WaitCursor
odbaCatItem.MissingSchemaAction = MissingSchemaAction.AddWithKey
odbaCatItem.SelectCommand = odbsCatItem
[code].....
Attempting to execute an update command against an Excel 2007 file gives the error:
Operation must use an updateable query. I'm using System.Data.OleDb with a connection string like this:
Dim strConn As String = "Provider=Microsoft.ACE.OLEDB.12.0;" & _
"Data Source=""" & pathToFile & """;" & _
"Extended Properties=""Excel 12.0;HDR=YES"""
I have tried setting ReadOnly=false but that gives Could not find installable ISAM. I have also tried setting Mode=ReadWrite and IMEX=1 which didn't seem to have any effect. My update command is like this:
Dim cmd As OleDbCommand = con.CreateCommand()
cmd.CommandText = "UPDATE [" + sheetName + "] SET [Quantity Error] = 'test' WHERE [Full Name] = 'Mr. Brown White'"
where sheetName was obtained from querying the excel schema. Is it possible to do what I am trying to?
I have some excel file, where I have to programatically delete all hidden columns.The problem if that, when I receive these files, the cells are mainly formulas, and as I delete some columns I get some "#REF#" problems.
I thought a bit about the problem an decided to create a function that loops throught all cells and replace the value by its own value, before deleting the columns, via OLEDB:
dt.Rows(row)(col) = dt.Rows(row)(col).ToString I don't know if this works. So I followed an update example I found in google, but it doesn't work:
Dim conexao_Excel As String = "Provider=Microsoft.Jet.OleDb.4.0;data source=" & fileName & ";Extended Properties=""Excel 8.0;HDR=Yes;IMEX=1;"""
cn = New OleDbConnection(conexao_Excel)
cn.Open()
da = New OleDbDataAdapter("SELECT * FROM [" & sheetname & "]", cn)
da.Fill(dt)
[Code]...
"Update requires a valid UpdateCommand when passed DataRow collection with modified rows." I image this is pretty basic, but I have already lost so much time on this issues...
For some reason every time I execute the code, it gives me the error "No value given for one or more required parameters" and it points to the ExecuteNonQuery. Below is the relevant code I have.
Public Function sqlUpdate(ByVal varBalance As Double, ByVal varWithdrawlAmount As Double) As Double Dim dbCon As New OleDb.OleDbConnection dbCon.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = dbATM.mdb" Dim query As String Dim cmdUpdate As New OleDb.OleDbCommand dbCon.Open() varBalance = varBalance -
[code]....
I am once more having throuble linking my visual basic code to the acompanying database. this current error is when I'm trying to add a new record to the database, using an OleDb dataAdapter: Whenever I run it, I get the error "Syntax error in INSERT INTO statement."
[Code]...
I have been scouring these forums and the internet in general as well as doing a lot of reading, all to no avail. I can not seem to successfully update the Access database from an edited DataGridView. I am trying to use Stored Procedures that are in the Access database and work fine therein. The DGV is filled in properly. I have tried an ever-increasing number of variants to update the database (Private Sub BtnUpdate...) without success. [cod]e....
View 6 RepliesI am using a Command Builder for OLEDB, I populate the Data table from the database, and then I use data adapter's Update method to add or update the database successfully.
[Code]...
I am suddenly getting an into statement error and can not seem to figure out why When I try to update a .csv file I get: syntax erroe in INSERT INTO statement When I try an update a textfile I get: The INSERT INTO statement contains the following unknown field name: 'SellingPrice'. Make sure you have typed the name correctly, and try the operation again.
[Code]....
I'm trying to updatesome records, currently my table is blank apart from the user id which is correct. but i get the error below.
My UserSettings table is as follows
ID is a Integer
MonthID is a Integer
YearID is a Integer
UserName is a string
Balance is a Integer
PhotoAddress is a string
GameSpeed is a Integer
This is my code and below that is my error in my ErrorTXT box.
[CODE]...........................
From what I read it is a good convention to name a method that returns a boolean value with the prefix of "is" or "has". So in keeping with this convention I am trying to name a method in my program with this prefix but I am running Specifically I have a class called Day. It is a simple class with a few data members and one method that returns a boolean value of true or false. The name of the boolean variable is isSpecialDay. This class has a method called isSpecialDay which takes the date of the day, applies some criteria to the date and then sets the variable isSpecialDay to true or false. My problem is that the boolean variable is named isSpecialDay and so it the method. What should I do?
Public Class Day
Private TheDate as String
Private DayName as String
[code].....
There are lots of questions about this but I've not been able to solve my problem using the answers to any of them (after many, many attempts..)
I'm working in vb.net creating an asp.net web application. I have an SqlDataSource and a GridView on my page.
I want to change the DoNotMail boolean value represented by a Gridview checkbox and automatically update in the database if the checkbox is checked from 0 (False, Will Mail) to 1 (True, Won't Mail) here is the code I used. [code]...
is it possible to do a two way sync on the entire gridview when the user hits a button so you don't have to do an update every time a row is changed? because the user might check the box and then check another box then uncheck a box and it would be a lot of updates...
There are a lot of interesting methods buried in VB.NET, and I'd hate to miss the one that "flips" a Boolean value.
What I'd like to do is something like:
Dim MyBool As Boolean = False
If <true statement> Then MyBool.FlipValue
Of course no method like that seems to exist in the Boolean type itself, but maybe there's another single-statement method that will accomplish the same thing.
If I am to update table 'Province' in databse get "Value of type 'Boolean' cannot be converted to 'System.Data.DataRow" Is there any other easy method to update table in Access Database?
Imports System.Data.OleDb
Public Class Form4
Inherits System.Windows.Forms.Form
Dim myadapter As New OleDbDataAdapter
[code]....
I am trying to get a parameter for my update from the gridview but it is an ID column that I do not want displayed. If I display the data in a boundfield it works fine but if I set the visibility to false the parameter is no longer sent to the update stored procedure. There does not appear to be a hiddenfield column that I can put into the gridview.I have tried to set the parameters through the code behind but I am not certain on how to access the data I want the following code does not work (It sets the parameter to nothing
Protected Sub grvFacilityDisciplineBillingRate_RowUpdating(ByVal sender As Object, ByVal e As GridViewUpdateEventArgs) Handles grvFacilityDisciplineBillingRate.RowUpdating
Dim row As GridViewRow = grvFacilityDisciplineBillingRate.Rows(e.RowIndex)
[code]....
I want to UPDATE query instead INSERT INTO using this code?
Dim cmd As New OleDbCommand("INSERT INTO tblPurchase_Order ([Order_Id],[Supplier_Id],[Address],[Project_Id],[dtpDate],[Material_Id],[Material_Name],[Unit],[Quantity],[Unit_Price],[Amount]) VALUES (@Order_Id,@Supplier_Id,@Address,@Project_Id,@dtpDate,@Material_Id,@Material_Name,@Unit,@Quantity,@Unit_Price,@Amount)", conn)
[code].....
I just found an error in the compiler. Newpath is a boolean and the compiler took and ran this[code....
View 1 Repliesi have problem when save boolean value to database. this my code vb.net
if bAdd then scmd.CommandText = "insert into products(prod_id,status) values(@prod_id,@status)"else scmd.CommandText = "update products set status=@status where prod_id=@prod_id"end if scmd.Parameters.Add(New OleDbParameter("@status", CBool(chkStatus.Checked))) scmd.Connection = dbConnDim iResult As Integer = scmd.ExecuteNonQuery
i get problem when execute query at line
scmd.ExecuteNonQuery
Data type mismatch in criteria expression
I am working with a multi form project. The long and short of it is that when i originally load form 1 ... all bool variables are false. Once i load form 2 and perform my operations some of my bool variables will be set to true.
I need to have some sort of object to listen for those changes. What i have come up with so far is the following. Private Sub patient_frm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]...
The if statement will work but i need a way to make it keep looking for changes in the boolean variables.
What is a Boolean and what does it do in Visual Basic 2010?
View 8 RepliesI have to update some fields of a table of access according to the value of parameter. If this paramter is "true" I need to update.
Table
idInvoice
price
[Code].....
Is there anyway to customize a variable to use both an integer and a boolean value?For example. I am kind of making a simulation engine and using GDI as a visual aid, I am generating a grid of tiles for objects to be displayed, but I do NOT want to repaint all the tiles just the ones that have changed, so that I can save fps.So I thought if I could set a variable for the "tile number", "how many objects there are on a tile", and a boolean value for whether or not the tile needs repainted.[code]
View 2 Replies