I have to update some fields of a table of access according to the value of parameter. If this paramter is "true" I need to update.
Table
idInvoice
price
[Code].....
Assume my form has four text boxes and it's bond with a Dataset, therefore The user can 1-4 fields. Typically I write one update statement that take four input parameters. Therefore I update the updated fields as well as non updated field. To do this in the proper way, how many update statements I have to write?
Or
How do I do this update properly? I use SQL server 2K5
I have been tasked with writing a program for our yearly reviews. We want all of the information gathered in the form to be submitted to an access database. I have created the form and the database. I can send info to the database but it is put on a new line everytime it is submitted. I would like to check the first column of the table to see if the user login is already there. If it is there I would like to update the information. If it is not there I would like to create a new row. This seems simple, but I can not figure out how to see if the user login is already there.[code]...
View 4 RepliesI would like to update some fields in access using visual basic(2005).
I established the connection with the DB(access 2000) and when I run the program I edit the fields on DataGridView.
Then I click on the update button and when I access again my DB I don't see any changes... :s
Code from my updateButton:
Me.TableTableAdapter.Update(Me.TestDataSet1.table)
I dont have any problem with the conection to the DB and when I run the program I see all the fields from the DB(it has 2 fields).
How do i find out the number, names and datatype of fields in an Access table
View 16 RepliesI am getting an incorrect repsonse after an update to a table. In my RowUpdating event I have the following code which builds an Update Parameter to call an SP to update a table. I must be doing something wrong but everything runs fine. My rowsAffected variable reports 1 after the update, but the table never gets the data.[code]I found a solution that is working. On the original DataSource for the update command I needed to add the following.[code]This in essence allows the original data source to call the SP. Note: that the command type needs to stay as TEXT not Stored Procedure as one might think.
View 3 Repliesso far i have this for my code:
Using myConnection As New System.Data.OleDb.OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & databasePath & ";User Id=admin;Password=;")
[Code]......
This did not work but did when i just tried creating the table and not the fields.
how to execute this SQL Statement
Scenario:
Given Tables T_Data, T_AllDesc, T_System1, T_System2
Given Fields:
T_Data= f_id, f_Desc, f_CreationDate, f_CreationTime, f_System1, f_System2
[Code].....
Why MS Access adodb in .NET returns 34 in fieldcount when table has 42 fields ?I see 42 fields in table of my MS Access mdb database. But ADODB layer in .NET sees only 34 fields. The Outofrange exception occures when I am calling method getOrdinal("FieldName") of reader class.
View 1 RepliesI have the code I am using below. On 3.5 framework Access 2003 database vb net 2008
I already have the database created but need to be able to add Tables and fields with the correct datatypes. So far it's not working but i don't know why or where the error is.
Private Sub MDIParent_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Try
[Code].....
Re DataGridView Sorry don't really have any code - just a whole project. Basically I changed the underlying Access (accdb) Table by adding a new field, The new field shows up in the DataSources section of the Solution Explorer and in the "Edit DataSet with wizard" page but when I attach the binding source to a datagrid view, the new field is not there. I also created a new bindingsource but still not there.I just noticed I've another table where I changed the names to something more meaningful, and the old names are still there and the data for those fields doesn't display in the DataGridView
View 2 RepliesI am trying to do an insert into a table called Policy. I keep getting an error that says parameter @Split has no default value. To try and resolve the problem, I set the default value of the split field (of type text) in the Policy table to "0" in Access 2007. I am passing in the value of a string "0" into the parameter before the insert statement executes.
Dim connection As OleDbConnection = PaulMeadeInsuranceDB.GetConnection
Dim insertcommand2 As New OleDbCommand(insertStatement2, connection)
connection.Open()
[Code].....
I need to Update Access Database Table with Data from a Different Table. Not all the rows of original Table to be Updated will be affected. How do you loop through the 2 Tables to do the required Update.
The Table to be updated is called "RecordList" and Table with new Data is called "RecListReport".Every attempt I've made won't work. I tried to Use 2 Datagridviews but couldn't get it to work right.
NewTestConn()
Dim Testconn2 As New OleDbConnection(NewTestConn1)
Dim da As New OleDbDataAdapter
[Code]....
I've created a Point of Sale program using Access and VB.net. I have an Inventory table from which items are sold. There is a quantity column and I want to be able to reduce the quantity for any item by the quantity that was sold in the point of sale front end. For example, there are 5 bracelets in inventory and 1 is sold. The quantity is typed into a textbox. The inventory quantity should now be 4 in Access. I don't know how to make this happen from the point of sale screen.
View 7 RepliesI am building a VB table which syncs with Access using multiple forms. I have managed to complete the first form. For the second form i am trying to add information into the database and save it. i do not know where i am going wrong with the code. with the code i am using it keeps bringing up errors. I am very new to VB and do not understand them.
Public Class Form2
Dim sqlString As String
Dim connectionString As String
Dim dataAdapter As OleDb.OleDbDataAdapter
[code].....
It seems that i cant update my table in access 2007. Here is my code.
Try con = new oledb.oledbConnection("Provider = Microsof.ACE.OLEDB.12.0"; data source =
|DAtaDirectory|Attendance.accdb; Persist Security Info = False;")
con.Open()
[CODE]...
--I dont received an error message when i run the codes i even dont receive an exception message. but when i check my database the record was not added.
new to vs2010 express trying to accomplish a simple task read records from a sql server DB table and add them to a table (different format eventually) in an access DB Sample code below seems to work ok up to the point of the data actually showing up in the access table.
[code]...
I'm trying to update a record from an Ms-Access table with VB.NET and ASP.NET. I'm getting 2 errors:
On the web page that's opened I'm getting Thread was being aborted Web Developer 2010 gives me an error says there's an error in the UPDATE statement
This is the code so far:Imports System.Data.OleDb Partial Class ChangePassword Inherits System.Web.UI.Page
Protected Sub btnChange_Click(sender As Object, e As System.EventArgs) Handles btnChange.Click
[Code]...
i'm using vs2010 i'm trying to update access table from text file that problem is that the 3rd column of the table is memo which wrote in many line in the text file i tried alot but didnt figure away to make it done this is my code so far
vb
Dim message As String
Dim lineindex As Integer = 0
Dim objStreamReader As StreamReader = File.OpenText(OpenFileDialog1.FileName)
[Code].....
I have looked all over for a solution to this problem and have tried a bunch of different things, but nothing seems to work.I have a sub procedure that does the following:
1) adds two columns to a data table (table1)
2) fills a dataset with several tables in order to make calculations (this determines the data that will be stored in the two new columns of table1)
3) updates ONLY table1, and ONLY the two columns that have just been added (these columns are thus empty for every row before the update begins)
As it is now, the da.Update takes about 3 hours to populate the entire table (it updates about 300 records per MINUTE if I'm lucky). There are approximately 40000 records in table1 for this test subset, but there will eventually be up to 1.5-2 million (in other words, this is a small table currently). I have tried using executenonquery() along with a sql UPDATE command instead of da.Update, as well as many other things, but none of them has improved performance at all. I've also tested it on two PCs, one running Vista and one XP, and there were no differences. I'm using Access 2003. I know Access is not ideal, but for now it is the only option.
I know that the root of this is the line of code with the da.Update, because the giant loop before it that I previously thought was causing the slowdown executes in 30 seconds, leaving only the update before the subroutine is complete. I don't know how exactly the da.Update works, but I've suspected that maybe it has something to do with that? Code is below:
[code]...
Details: I want to compare these above two table1 and 2 . The unmatched records should be save in a new table .
objectives
1 Should take input the table and fields we want to match each other.
2 Then after searching or reading the record from table and selected fields save the unmatch records in a new table
I'm trying to create a table in Word using data from a table in Access. There are four fields in the access table that I need. 3 fields are text which I can populate the Word without any issues. However the fourth field is a memo with >255 characters.I'm struggling to come up with the proper code to allow me to populate the Word field with the memo data that has more than 255 characters. The code I have so far is listed below. But when it hits the memo field, it crashes on the line I marked with **. I know it's not text, but I've tried many different field types, but nothing has worked so far.[code]...
View 1 Repliesi have a problem to retreive whole rows of a datagridview and transfer to my new access database in vb environment anyone can give me advice or examples of how to do it ? for example my datagridview colums have JOB_NO, ERR_DESC , REMARK
now i would to post all row (not selected datagridrow) from this datagridview to my new database .. i search at google using row count may do the job but i still fail on ...
I familiar with how to populate information from an access table to textboxes but not the other way around. I am familiar with the DataTable class.
I would appreciate any methods whatsoever on how to do this with as much detail as possible since I am not an expert on database connections.
I have a table in Access with two key fields (let's call them Item and Cust). These key fields *combined* are the primary key. So each record must have a unique Item and User combination. It can have a duplicate Item with other records, and a duplicate Cust with other records, but not a duplicate of both. Because my "primary key" is a combination of two fields, I can't make a primary key on the table in Access (it only supports one field as a primary key).
I have another table in SQLServer which also has Item and Cust, but in addition, is has several descriptive fields that give more details about the Item and Cust. I'm trying to use ADO.NET to bring in that SQL Server table and UPDATE some matching fields in Access with the descriptive fields. [Code]
I am writing a small program to update data in a SharePoint list. Now where I cannot develop or use applications for SharePoint unless I am on a SharePoint server, I thought I would cheat the system by using Access to link to SharePoint lists, and then use Visual Basic to play with the Access tables. I need additional functionality other than what VBA can provide me, so that is why I am using the VB layer.Is it possible that this is not permitted? Whenever I try to update an item in the table, I receive the message:
"cannot update '(expression)'; field not updatable"
The word 'expression' here is not a filler I added, this is the actual error.If I try to make the edit manually in the table using Access, it works fine (I haven't tried it through Access VBA yet...).
How my code works is this:I have a Dataset added to the project which connects to the Access database. I add one of the tables to the dataset and create a Class object to reference the table adapter (essentially a Data Access Layer). I can read all of the data fine, and when a change is made in SharePoint, my application sees the updates when it refreshes. But when I try to write back to the table I get the error message above.
For
Each r As
DataRow In TableAdapter.GetData.Select("Name LIKE '*" & FileName &
"*'")
[code]....
There are other columns in the table and some of them have default null values. I only want to update these two fields, but it almost seems like this is not possible. I thought I might be somehow opening the Dataset in a Read Only mode, but I can't seem to find that option anywhere.
Which method is professional to insert, update, delete data using either MS Access database or SQL database?
1) Using wizard to connect the database
2) Writing code manually such as
"INSERT INTO CUSTOMERS(CNO, CNM, CTY, TEL, TDT, NTS, UID) VALUES(@CNO, @CNM, @CTY, @TEL, @TDT, @NTS, @UID)")
I need to insert data from one form (Collection_Form) to 2 database tables. Like, Collection form data to be added in the following 2 tables:
1) Customer_Account
2) Collection_Account
I have a form with a list that shows information from a database. I want the list the update in run time (or almost real time) every time something changes in the database. These are the three ways I can think of to accomplish this:Set up a timer on the client to check every few seconds: I know how to do this now, but it would involve making and closing a new connection to the database hundreds of times an hour, regardless of whether there was any change Build something sort of like a TCP/IP chat server, and every time a program updates the database it would also send a message to the TCP/IP server, which in turn would send a message to the client's form: I have no idea how to do this right now Create a web service that returns the date and time of when the last time the table was changed, and the client would compare that time to the last time the client updated: I could figure out how to build a web service, but I don't how to do this without making a connection to the database anyway The second option doesn't seem like it would be very reliable, and the first seems like it would consume more resources than necessary. Is there some way to tell the client every time there is a change in the database without making a connection every few seconds, or is it not that big of a deal to make that many connections to a database?
View 3 RepliesI create table using sql developer
create table tablenodes
(
nodeNo int ,
nodeName varchar2(50),
centerX int ,
centerY int,
][Code]...
I have a problem in updating statements, can't write it correctly, every time I try to edit it, gives me different error (ora-01036 illegal variable name/number, missing expression, invalid identifier).
I am using the code shown below to compare two Access databases with two fields each and write the results to a third Access database. I am getting an error at the "Do While DMReader02.Read = True" line: "Invalid attempt to call Read when reader is closed." Why would the reader be closed at this point if I am using different DataReaders in the two loops?
Imports System.Data.OleDb
Partial
Class Form1
[code]....