I need to create a program that rolls a dice a user generated number of times and give the frequencies of the numbers that come up.I cannot for the life of me figure out how to get the frequencies?
View 5 RepliesI need to write a program that requests a high number and a low number from the user, then the program searches the array and finds all elements within the two numbers. The program is used to search for past presidents, so if I type 43 for low number and 44 for high number, the program will display:
George Walker Bush
Barack Hussein Obama
I think I have an idea of how to search up to a certain point, but not to stop at a certain point....Here is the code that I have for that particular sub procedure:
Quote:
Private Sub btnDisplayRqst_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayRqst.Click
Dim sr As IO.StreamReader = IO.File.OpenText("PRESIDENTS.TXT")
[CODE]...
could anyone please help me with this1.Create a simple Times Table program which will allow the user to enter an integer value n (between 1 and 20) into a textbox. On the click of a button output to a label the n times tables. Use a For Next loop to perform the repetition.i can output them to a list box but only last one to a label ive been stuck for 3 days.
View 8 RepliesI am trying to create a Random Number Generator (dice roller) that will dump its results into an open chat window. I was lead towards using DDE but have never used it before. Is this the best method? if not, What is?
View 1 RepliesIn a project I'm working on, I've assigned each user a unique ID with the following code. [code] However, I want to replace the number at the end (RecordCount) with a randomly generated sequence of 4 numbers (no 2 can be the same).
View 3 Replies5. Create a program which will allow the user enter ten numbers. The program is to count how many numbers were above 50?
View 1 RepliesI am wanting to allow a user to enter a number and depending on what number is entered, it will allow that many entries. For example, if 5 is entered, the user has to enter 5 numbers. Those 5 numbers will then be added together.I 6 is entered, 6 total numbers will be added.I was trying to do this with a for next loop but I wasn't getting anywhere.
View 5 RepliesRight so my generator is working, but I now want to take the numbers that it generates and add them to a list of generated numbers. So you can monitor what numbers have been generated. then ideally a way to exclude these numbers from being generated again.
[Code]...
I am trying to write a random number function that can just be called from my main module to generate different random numbers. I have tried this several different ways and I am having odd results. Approximately 19 times out of 20 the numbers come back exactly the same, but approximately 1 in 20 they come back as two different numbers. Im using Visual Basic Studio 2008. Here is the code I have so far, or rather, the current version of my many tests I have been running to try and figure it out. Sometimes it takes many runs of the program before the two seperate numbers apear.I've been researching it and have come up with nothing so far.I know I could put them in the module section as two different randoms and it works, but I get extra points if i use a couple classes in my program.This is the main module.
Module Module1
Sub Main()
Dim randomNumOne As New RandNum[code]...........
I'm converting a user generated list box to an array and then generating a user defined number of random strings and placing it in a textbox.The code I have works fine as it will generate the number of random strings the user wants, except sometimes a line is blank at the top of the list but is counted as a string.
View 4 Repliesi wrote some code that is suppose to get the prime number from the user and give its factors but there's some error
Dim t As Double
Dim n As Double
Dim ans As Double
Dim exp1 As Double
[code].....
First let me say yes this is for homework and no, I DO NOT want an answer in code. A simple nudge in the correct direction will suffice.Basically I am attempting to roll the dice with the roll button and then display the number of times a number shows up with a bar graph.
View 2 Repliesim trying to create a program where the user will type in a number then choose the units its in and units it will be converted to from 2 comboboxes. The output should be changing as different units are clicked without a button.
Public Class Convert
Sub Calculate()
Dim Unit1 As Double = (ComboBox1.SelectedItem)
[Code].....
i am trying to make a coin toss program where you toss a coin a certain number of times then repeat it a certain number of times.
the problem i have is "heads(counter2)" the word "heads" has a blue error line under it how do i sort the error out and also is all the code right
Public Class Form1
Dim tosses, repeat, heads As Integer
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[code]....
Create a program which promps the user to enter an unlimited number of test scores. The program should show the high score and the low score. You should use a loop of your choice within this program. The program should look similar to the one below:
View 3 RepliesHey everyone, i am in the process of making a replica deal or no deal game.It will have 20 cases, and have done half of the program i am up to programming the game stage I am a little confusd on how to make the program give a bank offer after x number of clicks?
View 8 Repliescount the number of times when a user enters a character followed by , and I want to count , number of times. So far here is what I have if you also know a little about the split function can you check to see if what I have is right?
Private Sub Strat0_LostFocus()
Dim q1 As New rdoQuery
Dim LO As Integer
[code]....
Beginning VB 2010, had a project that requires us to create a list box of 25 randomly generated 0s or 1s. Problem is when I put the loop in, it only repeats the same random number, not different one each loop. What am I doing wrong?This is the code I have so far...Code in Question:
'Declare new random object
Dim RandomGenerator As New Random
intRandomNumber = RandomGenerator.Next(0, 2)[code]......
Can i use the timer when the user tries to log-in and the user entered a wrong password 3 times.i will give the user 5 mins to log-in again with the correct password and if the user enters the wrong pass. 3 times again i will give another 10mins also this is what i want when the user close the program the timer is also their and running that it will give the user the remaining tym on how much tym left 4 him to log-in again.Can i do this in vb.net??i dont know how 2 do this i dont have a clue if it is possible can someone give me a code??
View 9 RepliesBasically I am trying to get my timer to stop when it reaches a randomly generated number.
I have dimmed num2 as integer (num2 is timer)
I have dimmed num3 as integer (num 3 is random number)
I have done num3 = randNum.Next (0, 8)
My timer is working perfectly and counts from 0 -8. My randomly generated number works too, so how do i get the timer to stop when it reaches the random num?
I have tried;
if num2 = num3 then
timer1.enabled = false
But that didn't work
Okay, so basically I'm trying to have my application randomly select items from a (multiselect) listbox. I want the user to enter the amount of items they would like randomly selected and it should all happen at the same time. I have the random shuffle down but it only selects one song each time you click the button. How can I loop this code as many times as the user specifies in the textbox?
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As
Dim shuffle As New Random
Main.songlist.SelectedIndex = shuffle.Next(0, Main.songlist.Items.Count - 1)
[code].....
I am trying to code something with nested for loop with the following format:
[CODE]...........
However when the program hits the last value of 'For loop 1', the nested for loops seem to only trigger once instead of the number of times that i specified.
Private Sub populatedgv1()
'setup temptable to store Server data
Dim m_table As New DataTable
[CODE]........................
I have set up text boxes for user to pick a number 1-20 and to enter a word as well. Then, press submit button. What's supposed to display in result textbox is the word that many number of times. For example if the number is 5 and the word is hello, then "hellohellohellohellohello" should appear. I don't know how to complete my For...Next function to append the word to the result.
Public Class Ch6ex1
Private Sub btnsubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnsubmit.Click
[CODE].....................
VS 2010 Adding whole numbers between a number and a number
View 3 Repliesthe goal i want to accomplish is when the user presses a button, "moneyamount" increases by a random number generated. the problem i am having is that after the action is finished the script does not seem to save the new value and always starts at zero. here is the script:
Private Sub button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles dojob1button.Click
Dim moneyamount As Integer = moneyamount + Int(Rnd() * 10)
moneylabel.Text = "$" & moneyamount
End Sub
Im trying to create a program that can search files and display the amount of times that it has been encountered, for example it will show the number 4 because it will run into four instances of the word. Im kinda stuck on how to do this,
View 3 RepliesIm working on writing a program for doing standard deviation and as of right now im running into one slight issue with subtracting my mean from the original numbers. I will post most of my code so you can get an over view but i mostly just want help on this one little part for now. Im going to be making a website for school and put some programming stuff on it so i wanted to make just some random programs for it so this is school related but not really homework. It's line 26 and 27 that this is relating to. When i put a stop in my code and look at the result of arrayDifferences it gives me 0.0 when it should be -1. I know i can go this route and say arrayDifferences(1) = arrayDifferences(1) - arrayAvg but seeing as how i want this to be a random number of numbers input by the user i cant do that.
CODE:
Write a function that will take one integer input parameter, create a sequence of numbers stored in an array from 0 to that number, and the numbers are a summation. For example, given 7
View 17 RepliesI have a datagridview with checkboxes in the first column and I want to do a loop on saving the serialnumber(s) when the users decides to check a number of checkboxes Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
the problem with this code is that it only inserts the serial number of the LAST checked checkbox and the number of entries of it depends on the number of checked checkbox for example ... if I checked the rows with the serialnumber 123 and 55652341, first the row with the serial number 123 then second 55652341, only 55652341 appears in the database and it is entered twice(twice because two checkboxes are checked)
Basically, I'm not sure if I'm thinking along the correct lines when trying to break this down. The program is supposed to display the question "How much is _ x _?" with _ being a randomly generated number between 0-9 which I have in a label. The student inputs the answer and clicks the "Answer" button. If he gets it right, the label below outputs "Very Good!" and automatically puts a new question in the above label. If the student gets it incorrect, the output is "No, Please try again." and the student keeps trying until the question is answered correctly.
My method of thinking on this is that the random.object generator is input first so the question with the numbers are output in the first label. Then, under the Sub answer.button, enter the statements that will either check and refer to the above statements to get a new question or have the student try again until it's answered correctly. One of the other criteria for this is that I have to use a function for the calculation. Would the function statement, because it has to return a value, go before the answer.button code or after?