i wrote some code that is suppose to get the prime number from the user and give its factors but there's some error
Dim t As Double
Dim n As Double
Dim ans As Double
Dim exp1 As Double
[code].....
I am working on a simple program to return all factors of a given input integer.nfortunately I am stuck. THe code is
Dim x As Integer
x = txtInput.Text
Dim factor As Integer
[code].....
I need to create a program that rolls a dice a user generated number of times and give the frequencies of the numbers that come up.I cannot for the life of me figure out how to get the frequencies?
View 5 RepliesIs there an easy way to check whether a number is a prime number? I've tried doing this:[code] url...
View 3 RepliesIs there an easy way to check whether a number is a prime number? I've tried doing this:
Code:
Public Function IsPrime(ByVal Input As Integer)
Dim NewInput As Integer
[code].....
I've been running through the online "Code Rules" tasks to work through Visual Basic. However I seem to be having a problem with one. The objective is to set a Button Click method to check if any number between 2-5000 is prime or not and to display it in the TextBox if it is prime. Here is what I have so far but it doesn't seem to work.[code...]
View 11 RepliesI've been running through the online "Code Rules" tasks to work through Visual Basic. However I seem to be having a problem with one. The objective is to set a Button Click method to check if any number between 2-5000 is prime or not and to display it in the TextBox if it is prime. Here is what I have so far but it doesn't seem to work
View 3 RepliesI'm working on a console application in VB .net that checks a number that the user has inputted, and tells you whether the number is prime.
The number that has to be inputted has to be between 1 and 100. I have all the code so far and at the moment it can check whether the number is or isn't within the boundries.
What i'm trying to do is compute whether an integer number is prime or not. The program performs this analysis for all odd numbers from 3 up to an input integer limit, for example 100. If the integer in the range 3 to limit is prime, a message stating so is printed. Otherwise, a message is printed that lists at least one other integer divisor. The output for each analyzed number consumes one line of text.
A sample output is shown below:
Limit is 100:
Number 3: is prime
Number 5: is prime
Number 7: is prime
[CODE]...
I understand I need to use loops, boolean functions, vbmath(), strings and multi-line out via concatenation. So I can put this is words how I think it should be done but not so great putting the code together
Test all integers up to the SQRT of the number (100)
limit = math.sqrt(100) + 1
Followed by 1 For statement
For c = 0 to 100 step 2?
And an If statement
If ......
result = false
I just started to use visual basic last month and I only know the basic codes. No matter how hard I try to understand the codes given by the other member, I can't understand it.So the program I'm making is to show all the inputted values and determine the even numbers, the odd numbers and the prime numbers.I don't know how to get the prime numbers.
Private Sub op1_Click()
a = InputBox("Input Endpoint: ")
For x = 1 To a
[code]....
I've been trying to create a function that checks if a number is a prime. according to [URL]..I have created a function although It doesn't work as expected.
[Code]...
It sometimes returns true for composite numbers. oh and I know if you google it you get functions that do this, but most of them look inefficient so i'm trying to make my own.
I have this piece of code which checks whether a given number is prime:
If x Mod 2 = 0 Then
Return False
End If
[code].....
I am not getting an output with a list, I can only get the last number of the statement in a text box.
Dim lowerLimit, upperLimit, primeNumber As Integer
Dim isPrime As Boolean = False
lowerLimit = CType(TextBox1.Text, Integer)
upperLimit = CType(TextBox2.Text, Integer)
While lowerLimit < upperLimit
[Code] .....
How do you make a prime number generator in a windows forms application
View 2 RepliesI was before knew how to code that it will give me a random number! Also i know it was 2 ways i could make it. A range from like 0 to 100 if i want that. And then it draws a random number from that! And i knew another there i could type in the numbers and it draws a random from there.
View 3 RepliesHey everyone, i am in the process of making a replica deal or no deal game.It will have 20 cases, and have done half of the program i am up to programming the game stage I am a little confusd on how to make the program give a bank offer after x number of clicks?
View 8 RepliesI have a database, 3 or more tables and a one of them with 3 or more columns.In this table i have ID column, Name Column, Date Column etc.I like to select one record for printing and give to the person one or more Receipt of payment (bill).But every time i like the number of Receipt to be unique. For all persons in my table and all payment.
View 1 RepliesI am working on an application that I want to give the User the option of using a password and sign-in or not. I have added three items to the "Settings" , these are:
1) SignInRequired (True or False)
2) UserID (string)
3) Password (string)
My problem is that I'm not sure where I should put the code. Should I use a module and set it as the opening form, or shall i put the code in the first form the viewer sees, which I tried and due to other situations the form has several different appearances, a this is causing a problem.
I need code which will give messagebox when user types letter in textbox, when he types number all is ok
View 2 Replieslet's say i have this application running, preset size. and there are other applications, like, firefox, vb, etc. in the background where i can click on them to bring them to front and use. now, when that's done, i'd like my application to minimize by it's self instead of just becoming a application that got sent to the back of another one.. the minimize is just to get me started, since i'll probably resize it to a button or so.just a squirrel looking for my nut...
View 4 RepliesI know how to add an exit button with a prompt. However, I do not have the slightest cluse as to how I can add this same functionality to the window so that if the user clicks the X in the upper right corner, there is a prompt message confirming the user needs to exit.I added a form closing event but getting wrong results, the form closes if I click no and message window does not leave when I click yes to stay.
Code:
Private Sub frmTest_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
If (MessageBox.Show("Are you sure you want to exit?", "Close Form", _
MessageBoxButtons.YesNo, MessageBoxIcon.Question) = _
[code]....
I have some combo boxes that basically set labels and scale multiplication factors for an XY grid. The combo boxes themselves work as they should. Two adjust scale levels of the XY grid (label and multiplication factors) the other changes the Y axis units (Imperial/Metric). The issue comes when I try to replot old data... I have the data in the array and have confirmed it is accurate...but...
When I apply the appropriate value to combobox.selectedindex and then call the Sub that actually makes the scale changes, the selected index reverts to -1. Small Example.... (note consider all variables as public and all routines in a single class - ignore spelling - this is a quick subset recreation not a copy).
Private Sub ReloadGraph()
combobox1.selectedindex = LengthScale(GraphNumber)
Call LengthLabels()
PlotUnits = Units(GraphNumber)
Call UnitsSet()
[Code] .....
OK - so I did add some code..... I did not actually run this code, but this is essentially a snapshot of what fails....when I step through line by line, the selectedindex changes to -1 as soon as I step to the second line of the second 2 Subs BEFORE it processes the second line (i.e. always after I step off Private Sub xxx() ). Again, both UnitSet and LengthLabels work OK separately when called, it is ONLY when I set the selectedindex from a variable (and again, it DOES set OK) and then call these routines that the selectedindex goes to -1. I have read a bunch of stuff relating to selectedindex and selectedvalue resetting IF one or the other is blank, but I have tried setting both in testing and this fails too!!
Ive been trying to figure out what report I should use as it appears I have crystal reports built in and also have Microsoft Report Viewer in this VB 2008.What I need to do is give the user a list of names and when a ame gets clicked it will show all the details in a report.I have loaded a ListView Control with the names from my database and this is letting the user pick a report so I can get the name and ID number of the record to show this way and just need to figure out how to get that record onto a report and what report to use?Ive done similar in VB6 but have never looked at .Net. The data is comming from an access database.
View 2 RepliesI am using vb.net in a project and in one of my forms i added a datagridview(i am using Access database bytheway). In this datagridview i have 3 columns from the same data table(name, surname,telephone). My question is : "How can i give the telephone number in telephone(textbox) cell and view as result the name and surname in each of the cells? "
View 6 RepliesI am attempting to create a game in Visual Studio 2008 that allows a user 10 attempts to guess a random number between 1 and 50. I have a label box in which I would like to display the remaining guesses as they decrement. The code so far appears below.
My two (I am sure very basic) questions are:
1. How would I pass the random integer generated through the Generate Integer function to the AmIRight button's click function? I was trying to decrement the counter each time the "Am I Right " button is pressed.
2. I would also like to evaluate each "guess" when the "Am I right button is pressed. Is it possible to nest a Select Case statement in a For Next Loop?
vb.net Option Explicit OnOption Strict OnOption Infer Off Public Class frmMain Private Sub btnExit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close() End Sub Private Sub txtGuess_Enter(ByVal sender As Object, ByVal e As System.EventArgs) Handles
[CODE]...
I need to write a program that requests a high number and a low number from the user, then the program searches the array and finds all elements within the two numbers. The program is used to search for past presidents, so if I type 43 for low number and 44 for high number, the program will display:
George Walker Bush
Barack Hussein Obama
I think I have an idea of how to search up to a certain point, but not to stop at a certain point....Here is the code that I have for that particular sub procedure:
Quote:
Private Sub btnDisplayRqst_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayRqst.Click
Dim sr As IO.StreamReader = IO.File.OpenText("PRESIDENTS.TXT")
[CODE]...
I am trying to draw textboxes when the user enters the amount of textboxes to be drawn on one form and the textboxes get displayed on the another form. I have found these codes online but it works with inbuilt codes I guess. That is, the number is already hard coded in the form.
[Code]...
I am supposed to create a program in my VB.net class to do the following:
1. Prompt the user to enter the beginning number and the ending number.
2. Find the sum of the even numbers between these two values, inclusive.
[Code]...
We are currently using for next statements in the class. I know how to prompt for and utilize the numbers that are input etc. My problem is the EVEN numbers part. I obviously have to determine if the number is even and then use a step value of 2 from there. But not sure how to determine if number is even or odd (guessing to use mod, but totally lost).
I am wounder if anyone might have a web site or no where I can find the information so I understand how to prompt the user to enter the beginning number and the ending number. And then to find the sum of the even number. Now does anyone know what a name convention is ? I have tried to look it up on the forums but cant find nothing on it.
View 9 RepliesI am trying to create a lotto simulation, but don't know how to continue.I am using numericupdowns to allow users to select 6 lotto numbers. and labels to display what they have chosen, but i'm not sure how to prevent duplicates without creating a large number of If statementsMy question is, is there an easier way to prevent duplicates without writing a bunch of if statements?here is my code:
Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim Lotto1, Lotto2, Lotto3, Lotto4, Lotto5, Lotto6 As Single Lotto1 = Val(NumericUpDown1.Text) lblLotto1.Text = Lotto1 Lotto2 = Val(NumericUpDown2.Text) lblLotto2.Text = Lotto2 Lotto3 = Val(NumericUpDown3.Text)
[code]....
I don't understand how to save the user selected numbers, let the computer generate 6 random numbers, and match the two sets of numbers together to see how many matches there are. As far as I understand the numbers should be stored in 2 separate arrays and then matched together to find any matches.