Windows Datagridview [2005] - Pressed Key Change To Ucase?
Jan 8, 2009I am using Windows Datagridview [2005] - and want the pressed key change to Ucase immediatley - without going upto the cellendedit() event,
View 1 RepliesI am using Windows Datagridview [2005] - and want the pressed key change to Ucase immediatley - without going upto the cellendedit() event,
View 1 Repliesi have a form that need to be 8 form like the first one, see my code :
If innsatsForm.innsats = 5 Then
Dim clform5 As New tellerForm
clform5.Text = "Innsats / Lag 5"
clform5.BackColor = Color.DarkOrange
[code]....
how to change between clform5 and clform6
Here is a sample of my code, its purpose is to convert an input password to a reverse and mirror to match the set password; Ex. If the set Password = "ReWq" then the input should be "QwEr"
The main problem I've encountered is that I can't input a text with less than 11; Ex. "AqWeRtYuIoP" is allowed while "qWer" returns IndexOutOfRangeException Error
Sub Encrypt()
'Subroutine for Mirror and Reverse on Password and ReType
Ch(0) = Pass.Chars(0)
[Code]......
I have a Windows form which contains a DataGridView within a GroupBox which is within a TabPage which is within a TabControl.The scrollbars property is set to 'Both' so that the user can scroll down to see all available rows in the grid.
I want the Windows Form to initialize to allow the user to see 7 rows but to expanded vertically to the size of 32 rows which is the maximum possible in this application.
Is there a way to size the form dynamically so the Form's Height property can be changed as the DataGridView's rowcount increases?
I am making a program (obviously), and when the user presses UP, DOWN, LEFT, or RIGHT I would like to move the label's location correspondingly. Here is my code so far, but it does not work:
[Code]...
What I am trying to do is change the icon of a form at either runtime or if a button was pressed. I have had no luck...the only way I found was
vb
Form1.Icon = LoadPicture("c:myicon.ico")
...but I can't use "LoadPicture"
Not much I can think to give in the way of details..
I am using the following code to change the direction of my snake in a game:
[Code]....
I have set it up so that if the direction is set as east and the left key is pressed not to change the direction to west so the snake doesn't eat itself. This works however if the direction is east and I quickly press down then left the snake doesn't have time to move down and just moves to the left causing the snake to eat itself.
I want to know if the Windows Run key pressed. How can it be possible? What's the constant or ascii code for this key? The second: How can I know if the program, I wanted to use, is activated? What's the correct func. for this?
View 2 RepliesOn an form i have few labels, upon clicking on that labels i want to display an another form which contains 3 textboxes(Default,Current,New) and 3 buttons(Default,Current,new). I need to save the values of all the textboxes to the label's tag, but the label's text will contain the value of the textbox based upon the button which is pressed. i.e if 'Default' button is pressed then the 'Default' textbox text should be the label's text. I have created a class with three mem. variables to the save these class objects in the labels tag. But how should i know which button was pressed.
View 3 RepliesI am working on a project. Part of my project requires me to capture data, for example, email address, from certain rows/columns of a datagridview(form2.vb) and displays them in a textbox on another windows form(form1.vb) with a click of a button(Add Contact button). The problem is the datagridview on my form must be able to display databases by making a connection to Microsoft SQL Server 2005 but so far, i have not been able to do that. I have seen many codes with regards to my problem but i do not know how to implement it.
Below are my codes that i have written so far. My program's limitations are not being able to display databases from Microsoft SQL Server 2005 so i created the statement below to add columns and test my codes.
DataGridView1.Columns.Add("CustName", "CustName")
DataGridView1.Columns.Add("Email", "Email")
[Code]...
I have a small Windows Application that displays a .chm Help File when F1 is pressed. What I would like to do is to close the Help Display programatically for example when a Reset Button is clicked and the Form is 'Reset'.
View 2 RepliesIs there an way to supress the validating event of textbox when the forms close button(X) is pressed. In the textbox validating event , if the condition fails then i am displaying an messagebox. Now suppose if the textbox has the focus and user directly presses the forms X button , then the messagebox is displayed
View 7 RepliesI have 2 listboxes on a form. Each listbox has a few items. As you know, I am able to have 1 item selected from each listbox, therefore making it 2 selected items from different listboxes.
I want to create a keyboard + mouse shortcut so I can de-select or change the selection mode of the listbox when Alt is held down and Left button on the mouse is clicked on the selected item. Here is the code that I wrote, which does not work.
Private Sub Form1_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Me.MouseDown
If Control.ModifierKeys = Keys.Alt AndAlso e.Button =
[Code].....
How can I set a button, so that when it is pressed, it stays in the pressed down graphic state. Then when pressed again it returns to the normal not-pressed visual.Make a button stay like this until pressed again: url....
View 3 RepliesI have a TextBox and set the MiltiLine property to true and AcceptsTab property to false.When the TextBox has focus and i press Tab it works fine and the next control get the focus, but when i press Ctrl+Tab it works as if AcceptsTab property is set to true and makes a tab character into the TextBox.The reason i press Ctrl+Tab.. when switching between forms in my MDI application.Now how to make a Ctrl+Tab when pressed works like Tab when pressed in a MultiLine TextBox?
View 1 Repliesthis.label39.Font = new System.Drawing.Font("Tahoma", 8.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
this.label39.Location = new System.Drawing.Point(37, 303);
this.label39.ForeColor = System.Drawing.Color.Black;
[code].....
I'm currently working on a project that has a simple game . I want to change the location of a label ( middle ) to another location when a key is pressed down. But there is something wrong with the first of the If statement .I've underlined "point " because it has the error.
Private Sub Space_Navigator_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyDown If e.KeyCode = Keys.Up Then If middle.Location = [u]Point[/u](156, 655) Then middle.Location = New Point(156, 547)
End Sub
How do you make an event when the small "s" key is pressed on a Windows form?
I now have the following code:
Private Sub Form1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress
If e.KeyChar = Convert.ToChar(Keys.S) Then
End If
End Sub
I am trying to do the following check to see if the user presses the Cancel button or the exit application (X). But for some reason it is not working. Can anyone let me know what am I doing wrong?
CheckCancel
If NewStationInfo.CancelButton.DialogResult = Windows.Forms.DialogResult.OK Then
do sometheing
[code].....
I have a button on my form where I'm showing a ContextMenu when the user left clicks on it, I'm actually using MouseUp right now to show it.What I would like to have happen is the user click on the button, the button stays pressed while the ContextMenu shows, it returns to normal when the ContextMenu closes (Either a menu item was selected, the user hits the escape key or they click/tab to somewhere else). Also I'd like to position the ContextMenu in the lower left corner if the menu opens down or the top left corner if it opens up. So the left edge of the ContextMenu is flush with the left edge of the button.Moreso the button staying pressed until the ContextMenu is closed.
Edit: I'm also ok with this being it's own control inheriting the FW's Button that used the assigned ContextMenu as well.
I have a DGV I am working on, and I have many columns.
For example I have Columns colcase(Combobox), colreportTime(Time)
the combox shows 4 cases {A,B,C,D}
what I need to do is if the user select "C"
the the colreporttime will show the time of this change unless the old value is C
How can I change the background of my form to look like that of Windows Mobility Center in Windows Vista?
View 2 RepliesI am using VS2008 and I have a form which has a datagridview. This is for an invoice where I already have the user select the customer from a details view and want to have the items in the datagridview change based on what the customer selected. Then when the item is selected I want to have the price change accordingly.
So far I have the customer selction as well as the item combobox(not limited to cust items yet) appear, but I cannot figure out how to get the join of the 2 items (cust+item as the price varies from cust to cust) to change the price. Question is, is it possible to do this in the same datagridview, or should i try to just break this down some other way?
If I have a project that I built in 2005 can I also work on it in 2008 and vice versa? What are the main differences from each version Also I deployed a project and it installs on the user computer with the name I installed VB 2005 with, not the name I use in project set up?? Is this common how can i change that without having to uninstall VB and reinstall with new name? Or is it picking that name up from somewhere else in my project?
View 2 Replieswill an program built on windows 7 using vs 2008 or 2005 have the compatibility with windows xp or vista
View 5 Repliesi have created some shareware applications. I implemented the following mechanism for piracy protection. Before Windows Vista and Windows 7 i did write a dll file to the System32 folder with an encrypted license key. Also in the Registry under HKEY_LOCAL_MACHINE i inserted a registry key.
The problem is that with Windows Vista and Windows 7 due to the User Account Control (UAC) this is denied.
I want to ask : what other mechanism can be implemented ? Where should i store the encrypted key file and the registry key.
I want that the application can be installed for all users of a computer only once.
If i stored the key in the user's application data directory then another user could easily just install it under another user account. Also i do not want to put the key file in the application directory because that would be too obvious.
note that i create the registry key with my application and not with the installer.
Using VB.NET 2008. Am using Datagridview in my application, Datagridview should display according to the windows screen size, Before I used vb6
code.
Private Sub Form_Resize()
On Error Resume Next
[CODE]............
Am new to vb.net, How to set a datagridview size according to windows screen size, In Datagridview property itself any option is available or i have to make a code as like vb. If i have to make a code, how to give form_resize in vb.net.
I have a treeview and text box below it... is it easy or even possible to allow a user to change the height of the treeview which will automatically change the height of the textbox so there is no gap between them?ie one gets bigger the other gets smaller etc etc
View 1 RepliesI have come across to develop an application for Windows 7.My program has one setting file and one LogFiles folder under the same folder as EXE. User will change some setting from Program and the values will update in this file. If there is an error, error detail will log in Logfiles/ todaydate.txt file.(Later I discovered/learnt that I should not edit/write the files to Program Files/sub folders.)So, now I'm trying to move these two files to another location. After searching a few on Net and I got the following result.[code]When I make Setup project for my application, I have to put the Setting file under one of these location.And what I found was, I only has a choice of "User's Application Data Folder" which is equivalent to My.Computer.FileSystem.SpecialDirectories.CurrentUserApplicationData.If i put Setting.ini file under this folder in Setup project, it gave me an warning of "File 'Setting.ini' should not be installed into a User's Profile folder because it may not be available to all users."
View 4 RepliesI am currently working on a project that, among other things, should allow the user of the form to click a button and be taken to the change password window for that particular user. The is Start>Control Panel>Users> select a user> Change password. I am trying to save the user alot of time by just taking them to the approite window. It would be nice if the password was automatically changed.I know that the System. should contain the right code touse but I am having trouble finding the right path. I did find a code to shut down [code]System.Diagnostics.Process.Start("shutdown", "-l -t 00")[\code]
View 2 Replies