I have looked over this and can't see where i'm going wrong, all i'm trying to do is add an item to a listbox when i a tcpclient logs on to the server. Code in question... If i put a breakpoint in i can see that initialclientresponse is set correctly.
Public Sub ConnectClient()
Dim pendingClient As TcpClient
Dim InitialClientResponse As String
[code].....
I'm trying to send a XML serialized class over a network stream the send is working
Dim IP As Net.IPAddress = System.Net.IPAddress.Parse(IPAddress)
Dim IPE As New Net.IPEndPoint(IP, 10003)
Dim TCPClient As New Net.Sockets.TcpClient
[code].....
in an winForm app in VS2010 win 7 compiling to x86, I try to do what Alvas.Audio seems to work. See (c# ex: [URL] for reference.
Dim data() As Byte = wr.ReadData(second * i, second)
The result give me data.length()=0. I do not have any exception, I can read format from it and whatever reader I use I got this problem.EDIT : After some tests, it seems like the uncompressed file I create in the first step (in PCM format, with .wav extension) can not be recognized by the Alvas.audio library for the second step. I must miss something around Audio file markups or something alike.
Here is the code that might be the source (basically this is step 1):
Dim functOut As String = String.Empty
Dim wr As Alvas.Audio.IAudioReader = Nothing
Dim fs As IO.FileStream = Nothing
[code]....
How can I write the resulted stream to be sure I can read it again later?
I'm using the stream writer to make a text file and write to it.I'm trying to get all the items from the listbox2 and save them to a text file called log.txt.The funny part is that its not giving me a ex.message.Do you see any error.[code]...
View 13 RepliesI have an .net application with 2 processes, communicating using a network stream.The protocol consists of a set of commands, some with parameters, which are sent through the stream to the server. The server processes the command, and sends a response.
The protocol for one of the commands looks like this:
[code]...
Usually, this works fine. Very rarely (probably once every few millions of calls), The reading side gets the wrong values. I added code to trace the values sent and received. This shows that occasionally, the reading side gets two extra bytes, with the value 0, which was not sent by the writing side. These extra bytes appear in different places, e.g. in one case they were between i1 and i2; in another they were between the first and second byte of s2. Does anyone have any idea where these 2 bytes could come from? I checked my code, and every place that writes to the stream is traced, so it doesn't look like they are actually written to the stream. It might be worth noting that s1 is always 0, in the current implementation.
So i'm still goofing around with this chat app thing. Current when a user sends a message it sends to all clients connected. The server stores all clients and their IPs in a hash table, so what i want to do is each time a client joins, the server will broadcast the updated hashtable to each client. I know i can make a mess and get the server to broadcast each row of the hash table as a string but i think this way would be cleaner, either that or send the client object instead of the whole hash table.
[Code]...
I have a little Logitech USB Webcam that I have attached to a laptop and I want to be able to view a video stream from it. I already gathered it will need to be a client/server model...and I probably need to use TCP/IP and/or Winsock (if its still even used)...
how to really approach this application as far as the video capture process? I don't have a need to really record video in any way so if i can just "preview" the video thats fine, although recording would be a neat bonus.
I read into the Windows Image Aquisition libraries and they seemed to be the right thing...but I wasn't so sure about the cross-network half of the equation.
I've solved part of the problem, but something I've just realised is the information just isn't getting through and EVERY example I find uses a Console type application and what about us people who don't wanna develop a Console application? I don't but nooooo they don't seem to understand that at MS and put one example which uses exactly that.
[Code]...
I'm trying to send a XML serialized class over a network stream
the send is working
Dim IP As Net.IPAddress = System.Net.IPAddress.Parse(IPAddress)
Dim IPE As New Net.IPEndPoint(IP, 10003)
Dim TCPClient As New Net.Sockets.TcpClient
[Code]....
I always get an error {"Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host."} The XMLFile has the xml document in it most of the time and I can go on and everything works but 1 out of every 5 times it doesn't work at all and the XMLFile contains nothing ..
I am developing an application where in I need to stream audio and video in the local area network. There is calling option from my application where users can call each other(audio call or video call) in the LAN.
View 3 RepliesHow i can send data from one form to another form through a network? i'm not asking for the codes, i just want to know what i should do to accomplish this task. i'm conceptualizing a game with the following details:
1.) there are two players, connected through a network
2.) they take turns looking for words from a puzzle of randomized letters
3.) after the given time has elapsed their words are checked and if both players has the same word, the word is removed
4.) the score is tallied
My question is, how do i get the words from the other form? specifically, how can the server form get the words from the client form? is it possible if i use xml? or can the server form access the variables of the client form? (i don't think it can, though)
Here is my idea so far: I have a bunch of computers connected in a local network. One of them is a MySQL server, one will have a vb.NET program wich will act as a "second server" and the rest will be different clients. What I want to do is that the "second server" will send out some kind of message or network package to some of the clients in the network, and they will execute a code based on what message it is, or what kind of package it is. I'll give you a simple example:
[Code]...
Im making a desktop player for a online web radio, and for the program I wanna make it show all the stream info. Like the stream name, and such. However I dont know how to do this? I looked everywhere
The server url is setup like this "[URL]" And it has all the stream info and that there. So is there a way I can get the info from there onto like say a label? Live updates btw.
I am using a Data Grid View to display data that come in from a tcp stream. When the stream receives data, the data is parsed and placed at the top of the grid. These are my top 3 lines of the cell clicked event of the Data Grid View.
Code:
If SpotsGrid.CurrentRow.Index = Nothing Then Exit Sub
i = SpotsGrid.CurrentRow.Index
tempFreq = CStr(SpotsGrid.Item(1, i).Value)
I placed the top line there to prevent errors when a user clicks on a blank grid before any data has been placed in the grid and to stop selecting anything if a user clicks on a column header. But my problem is as data is added to the to the top line that line of data is not click-able because the index=0 or Nothing. So my question is what would be the best way to code this so it is protected from the user clicking on a blank grid and the column headers but still allow the user to click on the first line of data?
What are the best way to encrypt and decrypt stream of data ?I would like that my program read a file.. and unencrypt it in memory then when it save it.. it encrpyt the stream and save it.
View 1 RepliesI am sending data over a tcp connection but I need send it in pairs for it to be sent i.e. 1st Send (doesnt work), 2nd Send (works), third Send (doesnt work), fourth Send (works)
View 1 RepliesI'm trying to set up a CLASS to represent a data stream.This is a newbie question so if the answer is obvious, please excuse me.Several of the data items are multiples which I would normally represent as an Array element.For example, in the code below, the element SolarNameplate has up to 10 instances, so I'd like to use array notation.I get errors, and it doesn't work, so I assume I can't do it like below.
QUESTIONS : 1 - is it possible to use an array element in a class ?
2 - is there another way to achieve what I want ?
Public Class SM1PS01
Private _Projid As String '... name or number of project
Private _LogoFile As String '... file containing customer logo[code]...........
I am working on a program that alters very large images. The images are usually in .tif or .bmp format. I load up the old image, copy a section of it into a new image, then save the new image. So far everything works my problem is that the images that i have to alter are 900mb+. Using the simple Bitmap class is not working because the images are quite apparently too large to fit into memory that way. (throwing an OutOfMemory exception)I want to step over the part of loading the image, and turn it into streaming the pixels from the image straight from the disk. I kind of have an idea of how to get the stream open and start reading, but I have no idea what to do with the 32bit integers that are being returned. how to stream pixel data from an image?
Dim oldImage As Bitmap
Try
oldImage = New Bitmap(file)
Catch ex As Exception
[code].....
I've set up a stream reader to get data from a serial file, functionality for that is already set up.
My problem is that the program seems to be missing out every other line of code in the file, which kinda defeats the point of a serial file. [code]...
This app is trying to send messages to a client listening on the port. The client's logs show that their port is being opened and closed, but no data coming in. Is there a bug or something missing in the following code, like perhaps stream.flush or stream.endwrite or a thread.sleep(0) line, that could cause this? The puzzling thing is, WireShark on the client computer does show the message my app is sending coming into the listening port.
[Code]...
Connection succesfuly made (TCPClients) Writing/Reading with NetworkStream At an interval of 16 ms. Client sends 4 bytes -> Server receives 0 bytes ??? Server Sends 4 bytes -> client receives 0 bytes ???
[Code]...
Everyone seems to have their own TCP dilemma so I figured I'd ask this here and see what the pros have to say. Basically I need to connect to an IP 192.168.5.100, port 8000 and listen for all the data that is being sent out. When I Telnet to 192.168.5.100 8000, it shows as...
[Code]...
I currently send a live video mix to a output screen (a form on a particular screen).Consider it like a really advanced version of PowerPoint. I call it a video control room for the pc. I want to take 30 frames a second from a screen (of my choice, I allow multiple screens) and the audio from the computer (stereo) set, save it to a hard disks. How do I do that? I know I can draw the image of the interface using the RenderTargetBitmap class, but How do I put those images (as frames) in an AVI file or push it to a video server? An SDK? or a Code Example to point me in the right direction, would be nice! I also want to capture the sound of the current Stereo mix, or microphone (as determined by the user).
View 1 RepliesI am looking to create a VB 2008 Express program which converts a data stream from a picoscope muscle sensor into a power output board which controls a mechanism. In simple terms when the Muscle sensor reaches a value of 0.8 V or higher I want the programme to send a text file to the power output control programme, and likewise when the sensor is below 0.2 V I want the power to be zero.
So 0.8 V > = send text file (0O=100%)
0.2 V < = send text file (0O=0%)
so when muscles being senced move the device turns on and off. I think I am successfully getting the data stream from the Picoscope which is plugged in the usb. I am using codes and examples that the programming guide for the device provided. [Code] I just need to now how to get the data to be displayed or how to tell the programme to do something with the data. The device also came with an example of how it can record data to an excel sheet if anyone needs the code to gain a better understanding.
I am downloading page data using the stream reader using readline.I want to concatenate each line into one long string for parsing The below line of code is not working: datajoined =dataline.Insert(datajoined.Length - 1, dataline.Length - 1)My inevitable goal here is to track stream data with a progress bar. But first I must learn to dload page data in chunks.
[Code]...
I am trying to make my application read data from a file. Then save the data back. However I keep getting an error which says the file is still open so cannot be edited. I also read that there is an issue with the streamreader and streamwriter do not close the program straight away. I was wondering if anyone had a way around this or any alternative ideas. Heres my code so far!
[Code]...
The RX data from the serial port is as follows:
FE FE FA E0 00 23 45 FD
I need to truncate everything else and just have positions 5, 6 and 7 output in the hex in a TEXTBOX. See below:
452300
Instead it will put the the whole steam in the textbox and it will be in decimal format, not hex.
I am sending data to server via TCP IP Connection. I am using a continuous loop at the server end - that accepts new clients and while streams can be read, it reads data stream.
The data is sent from the client with 2 leading bytes of data that represent the size of the packet of data sent and type of data.
My question is: how do I retrieve the size of the data packet and then check that this amount of data has been retrieved?
[Code].....
I am sending data to server via TCP IP Connection. I am using a continuous loop at the server end - that accepts new clients and while streams can be read, it reads data stream.
The data is sent from the client with 2 leading bytes of data that represent the size of the packet of data sent and type of data.
My question is: how do I retrieve the size of the data packet and then check that this amount of data has been retrieved?[code]...
I have a problem with the cryptostream, if i write the stream to a memorystream the memory that the stream used is still alocated and i have no way of unalocating it.what am i missingdoing wrong? im using-using on the streams,readers and crypto stuffs so the framework should shut them all down right? i tryed calling .close and .dispose but nothing ,in fact i moved it all over I have provided the sub that im using for the encrytion im in .net 4.5 so there is a lil async stuff but i know thats not the problem coz i moved this code out of my main app(.net 4) for testing to see if i could fix the problem.[code...]
View 12 Replies