Writing Not Matching Lines
Sep 3, 2009I have 2 file like this[code]...
But it not checking for non matching value and it writing everything from file 1 but i just want the line which is not matching with file 2 .
I have 2 file like this[code]...
But it not checking for non matching value and it writing everything from file 1 but i just want the line which is not matching with file 2 .
I have two files like this
File one
[2 11.63 39.7] X7.705 Y0.735 209.037
Open -209.037
18N694 P321 117461, 50374 100MIL;
[code]...
what i need to do is from file 1 let say my line is like this
[2 11.63 39.7] X7.705 Y0.735 209.037
Open -209.037
18N694 P321 117461, 50374 100MIL;
from the line i must take P321 and match with my File2 if i find the mathing line like this
12N709 11.3611 4.9474 P321 L6 BOTTOM 100MIL 43-CHISEL X11.3611Y4.9474 1922 0
then i must take the value beside P321 which is L6 and write it in my original file like this
[2 11.63 39.7] X7.705 Y0.735 209.037
Open -209.037
18N694 P321 117461, 50374 100MIL; L6
How we can do this. To get the P321 from my file 1 can i use regex pattern like this P*[0-9]. And how to match the regex pattern with file 2 write the content ?
I have 2 file like this[code]...
But it not checking for non matching value and it writing everything from file 1 but i just want the line which is not matching with file 2 .
I have a 3 text files
Text file 1:
.ERR - Max6 Error file
[2 19.40 44.7] X6.950 Y-4.705 106.522, 222.048
Open [code]....
From here i have to read the Node name which is MEM_B_DQ7.Then match node name with third file and get that node name group
Text file 3
NODE MEM_B_DQ7
PINS
This time i have a RTB (look.text) that contains no more than 12 lines (it updates according to a listbox but it will never exceed 12 lines of text). The lines contain numbers like this:2345,0,0,1,36,... and the last line will always be a number like: + or -123456789I also have 12 textboxes (a0.text to a11.text). How do i write each line from the RTB in a textbox?-i can't show you my code because it looks stupid and no matter what i tried i always ended up getting the same error "Index was outside the bounds of the array"-
View 4 RepliesI'm writing a program where there are text boxes and the user can enter info and append them to a text file as well as read from the text file and view the various entries in it. The problems I'm running into are that I have a button that opens an open file dialog box allowing you to select the file, and I want to get it to open the first entry of that file in the correct text boxes. the code so far looks like this
code:
I used to have this bit of code in there but there was a conflict with the .txt file being used more than once at the same time while it was in there.
code:
Im also having trouble writing to the file and I'm not sure why. I have an "Append" button that has this code in it
code:
and it comes up with the issue "object reference not set to to an object instance".
I want to create a little program with textboxes in it, that writes the contents of these textboxes to a file. It also needs to write some predefined lines to the files, even on the same line as where the contents of the textbox is.
Heres an example:
The file should look like this when you open it in notepad:
^1::
Send t Text from TextBox {Enter}
First I think I would need to do this:
Dim ioFile As New StreamWriter("scripting.ahk")
ioFile.WriteLine("^1::")
If I do the above it works.. But how can I write another line where the "Send t" and "{Enter}" gets written automaticly before and after the contents from the Textbox?
I'm writing a program that retrieves certain lines from a textfile. This textfile is rather large, so is it possible to have a progressbar that shows the progress when it retrieves?
View 1 RepliesI'm trying to create a program that stores a users stats for their character (for something like an RPG). I know how to write more than one line in a text file, but I want to learn how to read and write text on specific lines of my file. I know that you can just read each new line individually in order using a StreamReader, such as
username.text = readLine.ReadLine()
userage.text = readline.ReadLine()
[Code]....
This is good for just displaying the stats and changing them from a constant interface, but I'm afraid that eventually I'll need to read/write specific lines, like reading the fourth line which might specify magic level, or writing a new money amount.
so I want to make a button in one of my programs that writes text to a file. I know how to do that part. I use:
[Code]...
And just a FYI, I've spent about an hour looking this up... and I just can't seem to get it to work the way I wan't to. My application is simple, I have a "batch file editor". It has a richtextbox, a couple buttons for Open/Save/Test which are working fine.All I'm wanting to do is...
[Code]...
I am using the following code to write lines to a file. I seem to get Zero's after my text.Any suggestions to get the trailing zeros out of my text file? [code]
View 2 Replieshow to count the lines in textbox1.text (with multiplelines). I don't need to count each character. I only need to count each line from top to bottom in textbox1.text (multiplelines) and I will use Label1 to display the numbers.
example:
1-pauljaones
2-tommyperrry
3-marktoms
4-Jonessmith
5-paulwhite
Obviously this is 5 lines and that's what I need to count.
I have written a simple script to get a bunch of lines from a text file (they will be filenames eventually) which are split by new lines and puts each one into an array..
Dim ary() As String
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If My.Computer.FileSystem.FileExists("C:MenuFiles.txt") Then
[code]....
The only thing I can do for now is either use the substring function to remove the first character from all array values after 0 but I don't like that because it's messy and what if the split "works" as I want it to one one of the lines and knocks of the first character when I don't want it to.
below are a few lines from my text file(10929 lines)I need to read each line and insert into MS Access. each line is a column in my table and the record changes on every 8th line or to be more specific(on every 8th line you will see a number [1,2,3,4,5,6,7,8,9.....] this is where another record starts,
[Code]...
I want to draw string in multiple lines and and I want to know how many lines given string will take. I am using following method.
[Code]...
I am trying to make a script to spit command lines to a bat file to compress a bunch of files singly and then delete the original ones. I am sure that is easy to most of you, but I living a ____ trying to do this. A have a file list like this one belo, which was created with a command -- Dir /b /s /a-D N: > filelist.txt
[Code]...
read lines in a file, split the lines and spit the result to another file
View 2 RepliesI have a code to read and find match the same value of a text file.This is the code.
Imports System.IO
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As
[Code]...
How to store fingerprint images in the vb.net and how to match it??"
View 1 RepliesAt first i thought it was the padding since mcrypt uses zero padding but i changed the php to use PKCS7 and get the same exact results.I think it has something to do with the padding in the php.Test output from .Net:
Key: d88f92e4fa27f6d45b49446c7fc76976
Text: Testing123
Encrypted: /DMkj7BL9Eu2LMxKhdGT+A==[code]......
I have text like following example
XXZZXXXZXXZXXXXZZZZZZXVVVVVXZVZ
and also I have two patterns like XX and ZZ I want to find longest possible string which include above given two patterns and return starting and finishing index of the array.
In VB6 datacombobox there was a property that you could set that filtered the item list as you typed in the combo box (extended matching I think it was called) so that as the user typed more characters in the box the filtering progressively narrowed down the number of items in the list.The .net control does not seem to have this facility, or does it?Do we have to programatically do it now?
View 7 RepliesHave text file with two parts
[CODE]...
The upper part and the part after the line *+*+* Top *+*+*. What i must do is i must read the value in () at the Top part and compare that value with value in [] from upper part and write it side by side
This is my code so far:
Private Function GetLineMatch(ByRef LineToMatch As String, ByVal LineNumber As Integer, ByVal FileContents() As String) As String
Dim value As String = System.Text.RegularExpressions.Regex.Match(LineToMatch, "([d
[CODE]...
If u see the highlighted value are same. But from top part when it read (2 13.50 26.3)it only matches for one time the value in [2 13.50 26.3] so it take the first line and write and iqnore the second line.
I have text file with two parts
[code]...
If u see the highlighted value are same. But from top part when it read (2 13.50 26.3)it only matches for one time the value in [2 13.50 26.3] so it take the first line and write and iqnore the second line
i have 2 groups of text in my text file
Bottom
11.0 28 Red (2 13.10 04.0) [1 16.71 33.3] 130611 2948 229111 28275
6.5 28 Blue (2 03.00 03.0) [1 05.36 58.3] 132111 -67725 191611 -51225
2.0 28 Blue (1 05.36 45.3) [1 05.36 58.3] 211111 51225 210454 34691
[Code].....
In a table I have news posts with these fields:
Title
Content
OwnerID
The OwnerID relates to the ID in the users table, how can I get the name of the user who's ID matches the OwnerID? I'm writing a website in ASP.net (VB).
I am working on an application that llops through a dataset. Within each loop, I need to test to see if the datarow number is contained within an array. For example:For Each Page in Pages Test to see if page number is found in array (i.e. page number = 3, array = 1, 3, 4, 7, 8)Next Page The test would match on record numbers 1, 3, 4, 7, 8.
View 2 RepliesI have customer data in two different 3rd party apps that I need to organize into some reasonable data structure before making changes. I currently have two sub-classes of customer, one for each 3rd party app.[code]I need to map all instances of Customer1 to their respective Customer2s.I have an algorithm that has the logic to given an instance of Customer1 and a list of Customer2s find the appropriate match.Customers aren't the only data being matched between the two applications. I've also got two Item classes, two Payment classes, two Invoice classes, etc. Each of these classes has its own algorithm to match instances...I'd like to maximize the amount of reusable code. What is a good design pattern for matching portion?What data structure do I store a matched object pair in?
View 1 Replieshow would i get this USERNAME, USERID from this string:
Code:
<a href="javascript:attackWindow('USERNAME','USERID','50','RANDSTRING', 'RANDSTRING2')">
Adding the USERNAME to listbox, and then USERID into an array separated by a space.