I had one semester of vb.net in college and it was lacking at best. I am trying to write a few lines to a file on my desktop. When i implement the program it will actually find a file in a network share but the concept should be the same. I am basically writing a program to combine multiple csv files into a single file. I have the entire program written except combining the files. this is my code so far. it's incomplete but after i can figure this issue out the rest should be pretty easy. i will later on add parameters and all that fun stuff.
Public Sub writeFirstLine()
fileWriter = New System.IO.StreamWriter("cusersmyusernamedesktopforktruckfile.csv") 'the error happens at this line
[Code]....
I have a file already on my desktop with this name. in the actual program i will have to create it or delete it and all that fun stuff but for simplicity at the moment i just need to find the file.
at the moment it gives me an error that says directory not found. it seems to be looking for a file in the project folder instead of on my desktop. how can i get it to look at my computer instead of the file the project is held in?
What i've written opens an Access database and one can read and write into it (on a table called Journal)It does indeed work for newly made Access files. However it doesnt work with a specific Microsoft Access database (again .mdb) which was made with a very old Access, like Access 2000 or something.The error message is: Syntax error in INSERT INTO statement.Inside the zipped file below you will find the source code of the program, along with an access file that the program CAN read, and the one access file that i NEED the program to reed but it cannot!
To see what i mean run the program one, try to add a new line to the database. you get an error!now rename the Journal.mdb to "journal.bak.mdb. And the journal_working.mdb to Journal.mdb try to add a new line to the database again without altering the source code at all. it succeeds now!!
NOTE: the program can READ data from both files. but it CANT write data to the old access file
this is the code:
Dim cb As New OleDb.OleDbCommandBuilder(da) Dim dsNewRow As DataRow dsNewRow = ds.Tables("AddressBook").NewRow() dsNewRow.Item(1) = txtFirstName.Text 'or .Item(1) =
Application log file have been created to monitor the process and following code has been used to write the log information into text file. For the first time there is no error encountered when the application runs for hours, may be 3 hours i am getting following error "An unhandled exception of type 'System.StackOverflowException' occurred in mscorlib.dll" [code]...
I am trying to create a countdown to a date that the user can enter. I think I got most of the code in the button that saves the date. It gets the date the user entered in comboboxes, creates a txt file, then writes all the information to that txt file. I tested it out, but it didn't work. It created the file, but when it tried to write to it, it errored. The error says "The process cannot access the file 'C:Countdown.txt' because it is being used by another process." This is the code.
Dim enteredmonth As String = monthcb.SelectedItem Dim enteredday As String = daycb.SelectedItem Dim enteredyear As String = yearcb.SelectedItem
i am trying to append text to a file. I have tried streamWriter, fileStream, file.writealltext, file.appendalltext every single time i get an error "Object reference not set to an instance of an object" the path is correct and when i use file.exists it says it exists?
For testing purposes, I write a lot of alerts and error messages into a .txt file (some 15 entries per second). At the end of the day, the txt file becomes very large. I am now getting confronted with data loss in my application (threads indicated as being busy). Could it be that my entries in the Log.txt are slowing down my application to the point that the latter becomes unstable ?
I use the following code to write to a Foxpro DBF. The SQL table I am reading from has 9500 rows. When I loop through the following code, I get an error after about 940 rows. There is nothing wrong with the SQL data. The message I get is 'Variable Q940P65 is not found'
Public g_OLEDB_ConnectionString As String = "Provider=vfpoledb;Data Source=N:;Collating Sequence=machine;" dim strSQL as string = "INSERT INTO STATEUSR(DATEFIELD, STATECODE, MINAMOUNT) VALUES(?,?,?)"
I am trying to create an xml editor that read and write xml. my code reads the xml with no problem and allows me to create new rows but when I try to "write" it over I get the following error: "Token StartElement in state Epilog would result in an invalid XML document"
here is my xml: <?xml version="1.0" standalone="yes"?> <MacroList identifier="test">
I am trying to Read a text file from vb.net and then write it to microsoft access. The following is the codes that i have written for this project.
However, there are errors stated:
1. error in inserting record
2. Warning 1 Variable 'DoCmd' is used before it has been assigned a value. A null reference exception could result at runtime. C:Documents and Settings�74958XDesktop6jun[updated]6junForm1.vb 63 9 6jun[code]....
I have written a program to track the membership of a local gym that works perfectly on every computer EXCEPT the computer at the gym. I am pulling out my hair trying to figure out what the difference is any why ONLY that machine throws an error.
Background: The program is written in VB.NET (2008) and calls a MS Access db (PROVIDER=Microsoft.Jet.OLEDB.4.0;). The computer in question is a Vista machine that is extremely slow (I think it's a Celeron with 512 RAM).
History: I have tested the exe on a Windows 7 machine in 32bit and 64bit. Tested on a 2000 and 2003 server with 32bit and 64 bit processors. Testes on a Mac running parallels with XP. Tested on machines with Office XP, 2003, 2007 and machines without Office (thinking it was a resource that was missing) Every machine works but the Vista machine.
The error occurs when the program is trying to update an existing table with a new value that is valid. The field is set to text so I know it's not a casting problem. The error message is a general exception that reveals no information. I can continue from the error but it does not complete the change to the db.
One other interesting note is that the database is accessed across the network so multiple people can use the program at the same time. Unfortunately the Vista machine is the "server" and is the home for the db. The other machines are laptops and are not always accessible on the network. If the program and db are local to the laptops then the program works perfectly. If the db is accessed across the network and the program is local to the laptop then the program crashes.
Just completed a program, and tested it. It works, and does exactly what its supposed to do, but I continue to get this error: Cannot Write to a closed TextWriter.The code I'm using is below, but the issue here which I'm guessing would be that in my If statement.[code]'Goes on to create a bunch of tabled XML text.I have this code copied throughout each If Then loop. Basically If the text box is blank then the program will close the table and stop writing.I know the problem most probably lies in that its reading that its trying to close the table or stop writing, but the program forces it to continue.
"An unhandled exception of type 'System.StackOverflowException' occurred in mscorlib.dll" when writing to registryI write to the registry quite often in my program (Around 10 times every 12 seconds) the error doesnt constantly pop up sometimes it can save 20times and on 21st ill get the above error. How can i fix this. Is it because im saving so often?
I have create a vb.net app that creates an excel spreadsheet. When I deployed the app, to the shared drive, I have no problems but the user gets the below error. The user can create the spreadsheet but gets the error when writing. When the user logs onto my PC, the user does not get the error. When I log onto the users PC, I got the error. Application attempted to perform an operation not allowed by the security policy To grant the application the required permission, cintact your local system adminsitrator, or use the Microsoft .net framework
request for the permission type 'System.security.permissions.securitypermissions mscorlib version 2.0.0.0 culture =neutral Publickeytoken='b77a5c56193e089'
I have written the following Sub in moduleFunctions to call in any form. But it gives an error: "Name 'txtVNO' is not declared" & "Name 'txtVNM' is not declared"
Public Sub txt_Clear() txtVNO.Text = "" txtVNM.Text = "" End Sub
I am writing an app in VB2010. My code parses a text file, assigns data to variables My??, and then attempts to store this data in an access 2010 (actually access 2007 format) table. Yet, whenever my code gets to MyRow.Item("Artist") = MyArtist I get an error 5 'Artist' does not belong to Table MyTable, but the field/column does exist in the table as do all the others.
01Dim tbl As DataTable = New DataTable(MyTable) 02tbl.Rows.Add() 03Dim lastRow As Integer = tbl.Rows.Count - 1
I am trying to make a program in Visual Basic 2008 Express edition which have a textbox where the user can write information to search for in a simple database stored in the program-code.
What I would like is that when the user types a word, a string variable connected to that textbox.text will be treated as a string. BUT if the user types a number in the textbox, the textbox.text will be treated as an integer (for example a "Double")
So I need to write out an object to a text file as well as read in objects from text files.How do I accomplish this? This is the code i've used to read and write just simple lines of text. Is there a small modification to this or just a different function i use to read in an entire object?
I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?
I am creating a text file using a save file dialog and copying the path to the text box which file is used to write from vb.net. when i try to write i get an error "The process cannot access the file '....fileName.txt' because it is being used by other program".
The code is below
Public Sub writeInTextFile() Try Dim oWrite As New StreamWriter(TxtOutputPath.Text)
I am attempting to gather a group of file names from a directory. I am able to do this. I tested the code by having the list populate into a listbox and all desired items were added to the list.
Here is my code: Dim di As New IO.DirectoryInfo(strPath) Dim dir1 As IO.FileInfo() = di.GetFiles("*.txt") Dim dFiles As IO.FileInfo ListBox.Items.Add(dFiles)
However, a listbox is not my desired output. I am attempting to write these file names to a text file for purposes of then parsing the information to a datatable to compare with another datatable. How to get my filenames written to a textfile.
I am writing long text (1K to 2K characters long, plain xml data) into a cell in excel workbook. The below statement throws COM error Exception from HRESULT: 0x800A03EC
range.set_Value(Type.Missing, data);If I copy paste the same xml manually into excel it just works fine ,but the same does not work progamatically.If I strip the text to something like 100/300 chars it works fine.
Here is a code to insert data to DBaccess from textbox. When I write a colon(') in the textbox to add to DB it caused error and show me this Message "Syntax error in string in query expression '''')'
Code: Dim conn As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;" _ & "Data Source =" & Application.StartupPath & "Store.mdb ") Dim cmd As New OleDbCommand cmd.Connection = conn 'Add text to DB [Code] .....
I am working on a program using VB.Net 2010 which will enable me to setup groups of files & folders for back up with syncing capabilities etc. I have a concept program which is based on some sample code I found out in one of the VB.Net forums. I have modified it from a command line based program to a form based program. At the moment I consider this code to be a "concept" program which once I have the various copy/sync routines developed and debugged will be integrated in to another program I wrote for creating "Back Up" groups to automate the process. There are some 3rd party programs that do similar things that I want to do such as Microsofts Sync Toy, but none of them offer the grouping and exclusions options that I am going to program in to this backup/sync program.
So here is my problem, I have the included code taking two folders, a source and a destination, and copying everything from the source to the destination. It will skip over any unchanged files/folders and will delete anything found in the destination folder that is not found in the source folder and it will update all files in the destination folder that have a newer version in the source folder. In other words it will mirror image the source to the destination but will be smart enough not to copy unchanged items from the source to the destination thereby saving a lot of time. The sync part of the program is working fine, the displaying of the progress and results is not.
I have a structure in memory which is working fine - now I need to write this entire structure to a file.The below code almost compiles, the problem is that "mstaRecordInfo" cannot be changed to a string, probably because of the Date field. I've just spent over an hour experimenting and searching the web but have gotten no closer to a solution
I am trying to print the contents of my array to a text file, but instead of just printing whats in the array it prints all indexes even if they are empty.
this is the code i am using..
Code: FileOpen(3, "garbage.txt", OpenMode.Append) Dim intCounter As Int16 For intCounter = strFirstName.GetLowerBound(0) To strFirstName.GetUpperBound(0)
for a school project I have to write data from a listbox to a new file that a user can create. I can create and save a file no problem, but for some reason I can't write anything. I followed the textbook provided but when the file saves, I open it up and it is blank. I'm using fileWriter.WriteLine and I'm just test something basic to write to a file first and I can't do it:
Code: Private Sub storeFileButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles storeFileButton.Click 'creates a new file Dim result As DialogResult ' stores the file Dim fileName As String ' name the file to save the data
