I've got a simple upload form. Here's my code:
<form id="Form1" method="post" enctype="multipart/form-data" runat="server"
<asp:label id="lblMsg" runat="server" CssClass="msg" />
<span class="msg">Select Gallery:</span>
[Code].....
I have an Address Book project with a listbox. The listbox is bound to the database via the little arrow pop-up box in the corner of the listbox. I have the DisplayMember set to FirstName, and obviously only display the First Name of the contact in the ListBox. Is there an easy way to change it so that it displays the First and Last names? I can't change the binding because I need it to get the ID of the record selected.Here's the basis of my code...
Private Sub MainForm_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'CompanyDataSet.Contacts' table. You can move,
[code].....
Im having a problem getting the selected values of a listbox that is data-bound..
vb.net
Do Until CType(Ctrl, ListBox).SelectedIndices.Count = 0
For Each Index In CType(Ctrl, ListBox).SelectedIndices
[code]....
The error message says... "Operator '&' is not defined for type 'DataRowView' and string " "." And the only way I can get it to work is to pull out the & operator and change that line of code to this.
vb.net
'FROM THIS:
TableData.Miscellaneous += CType(Ctrl, ListBox).SelectedValue & " " 'Errors HERE
[code]....
The SelectedItem text shows up in the controls current state while debugging, correctly.. but after I finish the execution it shows up as "System.Data.DataRowView"?
I click on items in my listbox and then hit a submit button, but when istep through my button_clicked code it doesn't detect any selectedindex. All controls are in the same form and there are no panels. Why can't I detect what items were clicked on in the listbox?
View 2 RepliesI have a listbox and two buttons. Each of my button is labeled UP and DOWN. When I press UP, the current item in my listbox will be moved one level (or index) up and when I press DOWN button the current item goes one level down. I have been trying to manipulate the selectedindex property but it isn't working.
View 11 RepliesI have a listbox that contains numbers that vary from 0 to 99. My problem is when the number in the listbox is 0, listbox1.selectedindex will not return a value. So I cannot use removeat(x) which works for all other numbers. Can anyone give me an idea on how to do
View 4 RepliesI have a form with a dropdownbox two listboxes and two buttons on it. I removed a "select" button as I just used the DropDownList1_SelectedIndexChanged, but the event would not fire until I used the suggestion from:Why DropDownList.SelectedIndexChanged event does not fire?
It involved changing the AutoPostBack='true' and EnableViewState="true" properties
So now the DropDownList works but with the two listboxes, the SelectedIndex stays as -1 and does not change even when selected.
[Code]...
I think it has something to do with post backs, page_load or the selectedindex changed event of the listbox, it worked perfectly before I made the modifications.
I need to make events based on which index is selected in the listbox. I was wondering if there was an inbuilt function of if I need to use If conditions.
vb.net Private Sub ListBox1_SelectedIndexChanged(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
That code will run when the selected index is changed regardless of which index. But I need each index/row to run a different event. I know I can use If conditions to get what I want, but I expect it'd be a lot more efficient with an inbuilt method.
I have a listbox of the 50 states. I have one textbox and as I enter the first few letters of the name I'm supposed to use the SelectedIndex property of the listbox to display the appropriate name. I am not very good at programming at all. Is this a quick and easy thing to do and if so how is it done?
View 5 RepliesIt appears that I cannot assign the selectedindex for a databound listbox if it has no parent, but I can do so if I have populated the list "manually" from the same datatable. In my code example, the "if" line toggles between loading a list via data binding and loading a list "manually" (both use the same data table). In each case I attempt to set the selected index afterwards. With manual loading, the selected index is set; with data binding, an error is thrown (which can be avoided by assigning the listbox a parent, but the "manual" equivalent doesn't need this). Is this a bug?
[Code]...
First of all, I'm a somewhat-experienced VB3 Developer, and I'm trying to convert a VB3 app to VB.NET.I got the programming guide (http:url....) by searching the web.The problem I'm having is the syntax for .NET is way different than VB3, and that's OK, but finding the correct syntax is very difficult.I'm trying to eliminate duplicates in a ListBox:
When I access the Programing guide, I see that:
ListBox.SelectedIndex Property
Gets or sets the zero-based index of the currently selected item in a ListBox.I also have Murach's and Stephen's manuals, and they say the same thing.Visual Studio converted The old .ListIndex to a VB6 Function:
If VB6.GetItemString(PlayList_ListBox, I) = VB6.GetItemString(PlayList_ListBox, I + 1) Then
This is Try #1. It generates: VB6 is not declared. It may be inaccessible due to its protection level.Then I read that VB6 is only for converting old code.So then I tried SelectedIndex:
Dim I As Short [code]..........
I'm trying to bind a listbox to an ObservableCollection and keep the listbox updated when items are added to the collection. I have a class called CollectionOfBlogs:
Public Class CollectionOfBlogs
Implements INotifyPropertyChanged
Public Event PropertyChanged As PropertyChangedEventHandler _
Implements INotifyPropertyChanged.PropertyChanged
[code]....
Beyond this, I have a simple textbox and button on a page. When a name is entered into the textbox, and the button is clicked, I call the addBlog(passing in name from textbox) sub routine in the ITRSBlogs Class (back up the page a bit) to add the item to the collection.Problem is, when I add an item to the collection, the listbox is not updated.
I have a listbox bound to a datatable, and controls that are bound to the same datable. As you navigate through the listbox, the controls correctly reflect the selected item, and changes to the controls update the dataset OK as well.Now I'm trying to add a "New" capability to the form. So on the click for "New", I deselect the currently selected item and clear the controls[cod]e...
View 1 RepliesFor some reason when I try binding the listbox to a datasource I put in (it contains a table of words to be used in the listbox), it shows me a + sign like it will allow my to drop text in but then it doesn't insert anything. Does this code not work for databound related things?
Private Sub ListBox1_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles ListBox1.MouseDown
ListBox1.DoDragDrop(ListBox1.SelectedItem, DragDropEffects.Copy)
[code].....
I'm using a textbox to supply a filter for the datasouce which is bound to a listbox. It works (mostly) with a few exceptions, one being i was to restrict the height of the listbox to the number of entries (upto a maximum number), so a bit like a combobox (which in effect is what I'm writing). One of the problems is when the number of entries changes there does not seem to be an event raised, although the OnDrawItem is called for the items to be displayed (the displayed ones!) Is there anyway to find out (in a derived listbox) when the number of entries has changed in the datasource?
View 4 RepliesI have a list box that is bound to a datatable, which works fine. The question I have is this. I have a list of values in the form of a sqlDatareader that I want to use to select values in the list box, that is to say if the value from from the datareader matches the value member from the row in the listbox then select the row. I've come up with the following code, but can't find the syntax to utilize the SetSelected method.[code]...
View 5 RepliesI am adding object directly to a ListBox, and inside this class, I've got a BitmapImage object.I'm using an ItemTemplate :
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel>
[code].....
I want it so every time I click an ITEM in the Listbox it displays ALL the data into the textbox. I know there's an easy way using table adapters and binding the listbox, but I'd prefer to do it this way for my project.
So this is what I got.
Lst.DataSource = ds
Lst.DisplayMember = "tblStudent.FirstName"
Lst.ValueMember = "tblStudent.StudentID"
[code]....
It only adds the first rows details to the text box when I click the second record the first rows details are still there.
I have a drop down box that I want bound to "TicketBindingSource - InvoiceStatus". However I want to have the text bound only. The choices I would like to specify from my own list (Invoiced, Needs Invoice...) When the user clicks on a choice I want it to update the database. [code]...
View 22 RepliesI have a data bound combo box which i want to open at a certain row in the table
i can't set the selectedvalue because it is databound
(I'm using VS2005)Instead of using a bindingnavigator, I'm setting one field as a databound combo box with the display member and selected value set to the field.Then the other fields are text boxes and change based on the selected value of the combo box.The problem is that when I run the app, the form won't close.
View 6 RepliesI want to allow blanks in BOUND textboxes that are bound to int and money columns.
It's not letting me - apparently it knows to force digits...
Is there anyone who can tell me the code for the below? Receive a lower bound and an upper bound of a range. Also receive a number of random numbers to generate. You must validate
1) the numbers are integers
2) the lower bound is less than or equal to the upper bound
3) the number to generate is positive (i.e., > 0).
Generate this many numbers in the specified range and keep track of how many of each are generated in an array of counters. Once all the numbers have been generated, display in a List Box the number, the raw count data, and the percentage of how many times the number was generated displayed with two decimal places of precision.
I have a dgvAssetsSummary which holds data queried from the database, it hold's the AssetType column and Total column, it's grouped by AssetType, giving a summary of all the totals and what assettype they belong to.I'd like the Total column to be formatted so that there are no decimals and with commas, at present each total has four decimal places and no commas, this needs to be able to be read easily by clients. I've tried using the following code to format the column after I query the database, but to no avail.
dgvAssetsSummary.Columns("Total").DefaultCellStyle.Format = "#,#"
how to do this, I've had a bit of a look around but I can't find much. I'm currently looking at a couple of pages from the msdn library about it.
I have some custom code in an extender that can be enabled on textboxes to determine whether or not to display scrollbars based on font, size, and textbox size. It works great, so long as the text box isn't data-bound. Once it is data-bound, I get some weird behavior. The text suddenly selects when the scrollbar is turned on. I am using VS 2005, VB.NET.
[Code]...
I have a class which I'm binding to a series of textboxes, date pickers and so on. When I change text in the text boxes, the object updates just fine, and when I then save the data, it has the changes. My problem seems to be with the RTB ... if I bind to the .Text property, it works just fine and updates like any normal text box. However... when I bind to the RTF property... changes to the object don't happen unless I first click out of the RTB... quite annoying. If I edit the text or change the formatting, and hit the save button, the changes don't get reflected in my object. I've even tried using debug statements to track when the property is changed, and I'm not getting the results I desire.
View 7 RepliesI have a DataViewGrid1 that has two hidden fields that the user cannot view. Code and Name.Code is a primary key field and must be manually set prior to inserting into table. It is currently giving me an error saying that code cannot be NULL. The following is the code that I have:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.SIZERUNSTableAdapter1.Fill(Me.Corkys_ProdDataSet.SIZERUNS)
[code].....
I have a few bound data controls on a form. However, there are certain data fields in the same table from which this data is coming from which I would like to be able to access in memory but which is not bound to a control. I have tried looking through the properties of my datanavigator, my dataadapter and my databindingsource and can't seem to find out how to sort this.
In simple terms, I have a data navigator to iterate through various fields in my dataset. I want to be able to access to the contactID of the currently visible / selected contact. The contact ID exists in the data source but I do not want to show it, just access it. How do I do so without issuing a manual SQL call to the database again?
I am a programmer from Uruguay. I have read the other similar questions about my problem, but nobody has given the answer I need. I use VB .net 2005 and its datagridview. I bind it to a dataset which is populated with a table of MySql. And when I sort the numeric columns, it sorts them as string, not numbers. I have tried casting the data to integer in the sql statement, but it doesn`t work. I changed the format of the column of the datagridview to single or long but it didn't worked either. I really can't believe it is happening, it is a so common need! I thingk It should be totally automatic.
View 12 RepliesBelow code creates a set of comboboxes which are bound to the data table. This works almost fine with one exception. Whenever i change selection in one of these comboboxes, any other combo changes it's selection too.[code]...
View 4 Replies