Cant Get The Save As Menu Option To Work Correctly?
Aug 5, 2010
I have written an MDI text editor, its almost complete, but I cant get the save as menu option to work correctly.
HTML
'This sub routine controls the save as menu option
Private Sub SaveAsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles[code].......
So whats happening is that it opens the dialog ok, saves the document to my chosen location correctly, but opens a new document and gives the new document my chosen file name and leaves my saved document with the file name New Document.But when I close all the open screens and then re-open my saved document its all as it should be.
View 1 Replies
ADVERTISEMENT
Jun 10, 2010
I am writing a text editor program and I have written the new, open, save as, exit menu items but I am struggling with writing the save option.Now I have created the menu itself (well vb did, I just used insert standard items) but how do I code up the save menu option so that it updates the current document or if the documnt has not yet been saved bring up the save file dialog.Here is the code I have so far
Public Class Main
Private Sub NewToolStripButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles NewToolStripButton.Click, NewToolStripMenuItem.Click[code]....
I know I have some finishing touches such as messages and error handling and stuff but at the moment I want to get all the basics working,I think the save menu option is all I am struggling with at the moment.
View 1 Replies
Aug 1, 2010
I have written a sub routine for a Save>Menu option for a MDI Text Editor, see my code below
Private Sub SaveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripMenuItem.Click
Dim f As Form2
[Code]....
Now if I take out the ( I get yet another error which states
"Argument not specified for perameter "File" of public sub WriteAllText(File as string, text as string, append as boolean)
All I want is when the user clicks the save menu item the document either saves the changes made to the current document or the save as routine is involked.
View 4 Replies
Mar 11, 2010
i have written a sub routine for a Save>Menu option for a MDI Text Editor, Please see my code below
Private Sub SaveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripMenuItem.Click
Dim f As Form2
If f.Text = "Text Editor V.2 - New Document" Then
[Code]...
View 1 Replies
Jun 24, 2010
I'm just trying to have my "exit" option in my menu strip remind the user to save their settings...If they haven't, the click "no" and save their stuff, and then exit. I can't get the form to close if I hit "yes."
[Code]...
View 4 Replies
Jul 28, 2009
I want my console application to be able to do one function I have when you click one option on the windows context menu, and another function when you click another option.
View 3 Replies
Jun 22, 2010
This is going to be hard to explain but oh well.I have a form with a menu. When I hit option one, it opens another form (form2) inside that same form (mdiparent). When I hit X on form2, then try to open it again from the original form with a menu thru the menu, It says it cant access a disposed object. Here is the code: Form1:
[Code]...
View 1 Replies
Aug 7, 2009
Two(2) Things. I don't have the "Clickonce Option" when I select BUILD for the menu bar. I also don't have the "Step Into Option" from my DEBUG menu. Do I have a problem? Or do I need to turn something on?
View 4 Replies
Feb 21, 2012
just had a walkthrough in class and the example code our teacher gave us does not return a value. I am having alot of trouble with my current assignment because I do not see whats wrong with it. It is supposed to take two numbers entered by the user and add them together for a total with a tax rate, but it continues to return all 0's heres what the code looks like:
Public Class Form1
Private Sub BtnCalc_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles BtnCalc.Click
[code]....
View 3 Replies
Dec 31, 2011
Consider the following:
class Bind
{
public string x { get; set; }
[code].....
View 4 Replies
Jun 15, 2011
I have a Form that I named "Taulukonvalinta". This has 2 buttons (Ok and Cancel) that are defined as OK and Cancel.However, when I call the actions from my main form, Form1, only the "OK"-action works.>[code]
View 4 Replies
Aug 30, 2011
I am trying to use impersonation when running an exe on a server. It appears to log in correctly but windows still doesn't recognize the Username.
View 2 Replies
Aug 1, 2009
I have researched the net, youtube, and the msdn DB, and still can not find the working answer I am looking for. I would like someone to show me how you would save the contents of "Listbox1" to a .txt file using the "Save As" Option. I know how to hardcode a savepoint in, but since there will be multiple users I would like the option to be up to the end-user.
View 4 Replies
Dec 9, 2009
[URL]
In here output is:
../../xxx/xxx.asp
Which looks correct almost all web servers will process the two of the following as same request:
[URL]
What's the best way to fix this behaviour is there any API to do this, or shall manually create a new URI and remove all // in the path?
View 2 Replies
Apr 6, 2011
On my software , i have a function for search in the list a member . The function have more fields : Girls , Boy , Old , etc ... but the software doesn't work correctly. I want him to search with several conditions, adding AND. Here is the code :
Vb
For Each MemberALister As MemberInfo In _Listemember
If Me.Girl.Checked Then
If MemberALister.Nom.Contains(Me.Genre.Text) Then
[Code]....
View 21 Replies
Feb 25, 2012
How do I get the SuspendLayout and ResumeLayout to work correctly in regards to a listview. I have added these lines of code before and after I have added the items, yet each item is still being displayed as I add each item.
My code:
Dim x As Integer
Dim startTick As Integer = Environment.TickCount
lstFiles.SuspendLayout()
For x = 0 To UBound(cacheListArray)
[code]....
I am adding 2000 items. This takes 7 seconds. I was told that it should be a lot shorter than that. Is that correct?
New code:
Dim ListViewItemArray(-1) As ListViewItem
ReDim Preserve ListViewItemArray(UBound(ListViewItemArray) + 1)
ListViewItemArray(UBound(ListViewItemArray)).Text = file.Name
[code]....
Nothing is being added. What have I done incorrectly?
View 1 Replies
Dec 14, 2010
After upgrading my solution with both c# and vb.net projects I have encountered some problems:
1. When for example writing Public Property MaxDate As Date and pressing enter it does not create the Get/Set values
2. Refactoring is not available
3. The properties window is blank when viewing classes (normally I would see Serializable and COM properties to the right)Intellisense works and the above problems work in new projects.
View 3 Replies
Jan 21, 2010
My debugger doesnt work correctly anymore and I want to let it work correctly cause i've done some changes in my project but when I click on debug then it just shows my old layout.
View 4 Replies
Mar 27, 2010
I am trying to set up an app that has a menu and have each option run on a different thread. When I set up 2 thread to run I get the following error: Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThread Attribute marked on it. This exception is only raised if a debugger is attached to the process.From what I have researched, it says to make sure the openfile dialog function should be used with the main thread only. Since I have <STAThread()> added above the main I'm not sure how else to handle this. The main thread needs to be listening for the menu options and if I change it around it runs that option and the other threads hang. [code]
View 4 Replies
May 12, 2012
I've tried these two blocks but it returns the same value. I do not describe more, I simply just show the code:
Dim f As Nullable(Of Integer)
If f = 1 Then
Console.WriteLine("Equal")
[Code]....
It works in C# correctly...
View 1 Replies
Aug 5, 2009
Add a new report to a windows forms project. Now add the table data region from the tools. If you don't already have a strongly typed dataset displayed in the data sources view, get that ready. Now do the tried and true easy-to-use trick of dragging a field from data sources onto the table's details row.
[Code]...
View 3 Replies
Apr 2, 2009
I am learning Visual Basic Express 2008. When I follow step #5 below, the option Set as StartUp Project does not exist. How I can accomplish this. To create a test project for your class. Open the Persons project that you created in the previous lesson. If you did not save it, you will first have to go back to the previous lesson, Adding Methods to a Class, and complete the procedures.
On the File menu, point to Add, and then click New Project.
On the Templates pane in the New Project dialog box, click Windows Forms Application.
In the Name box, type PersonsTest and then click OK.
A new Windows Forms project is added to Solution Explorer, and a new form appears.
In Solution Explorer, select the PersonsTest project, and then on the Project menu, click Set as StartUp Project. In the Solution Explorer, select the PersonsTest project, and then on the Project menu, click Add Reference. The Add Reference dialog box appears.
Click the Projects tab, and then select Persons and click OK.
Double-click the form to open the Code Editor, and then enter the following declaration just under the line Public Class Form1.
View 7 Replies
May 1, 2010
I did some research and i found that i will need to edit the registry.So if i make a folder called "Get Path" in the ContextMenuHandlers folder.When i click on the file in windows explorer or desktop etc i will have the option called "Get Path".Now for the value key what do i put inside?What i want is when the user right - clicks on the file my program starts up and displays the path of that file on a msgbox or listbox. I was thinking of letting the Windows Installer (.msi) doing this for me.
View 37 Replies
Jan 20, 2011
so i have a quite huge program. but lets say i have one label. and i want to save that. i have the code and everything for saving the text of the label. now i want to assign ctrl+s to automatically save the labels text once pressed instead of going through a menu to choose save.this is like a regular texteditor where u press ctrl+s and it saves.
ive used this
If (e.KeyCode = e.Control & Keys.S) Then
MessageBox.Show("Ctrl+S pressed")
End If
and
[code]....
but it doesn't do anything once pressed.im also using the keydown declaration for the form.
View 4 Replies
Dec 16, 2011
I create a project.However, after I close VB2010 express and then open again I can not find or open my project.Futhermore, I need to zip a project and send it.I am doing something wrong in process of saving. I do not know what?
View 2 Replies
Oct 13, 2011
when i turn on "option strict" i can not us a sub to set all forms in project to same size?
I call the routine byref MY. i also use a common sub to draw the same border lines on all forms.
must i now copy the same code to all forms?
View 6 Replies
Apr 17, 2009
[Code]....
I add a button to a form each time the user clicks a menu option as:
[Code]....
This draws a small blue line at the bottom of the button to show it is highlighted. Just like the mouseoverbackcolor property on a button except this will draw the line. It works fine until you slide the mouse very fast between the buttons. It is as if the mouseleave event doesnt always fire.
View 2 Replies
Mar 15, 2012
Public Class Projectile_Motion
02 Dim initialHeight As Double ' Holds beginning height
03 Dim initialVelocity As Double ' holds velocity
04 Dim time As Double ' holds time
05 Dim heightVal As Double ' holds height at different intrvals in time
[Code]...
View 5 Replies
Jun 1, 2009
i want to put one font dialog and one color dialog in one content strip menu that work in every form i have.
View 1 Replies
Nov 11, 2008
I only just now realized that the project does not update when it saves until you quit out of Visual Studio. As such I now have 7 backups that are exactly the same, including the main file. I would have lost hours of work if not for finding a copy that somehow had all of my work saved to it. It was named the same thing as four other projects, though, with the other three being the same work from hours ago. Where is this temporary project? I cannot find it on my computer, and I'm afraid of losing all that work. Also, is there a way to do a Save All, and then something like "Save the whole project as" without quitting out of Visual Studio, looking through folders, finding the actual project folder, and copy pasting that? In other words, is there a way to do that in Visual Studio itself?
View 3 Replies
