i am currently doing a program to control some device via usb port but i don't know how to interface the usb port using vb.net.this is code in vb.6.but i don't know how to changethis code into vb.net.
Private Sub Command4_Click()
Dim id As Integer
Dim status As Integer
[code].....
I am doing an interactive voice response (IVR) project in vb.net, for that i am using E1/T1 network interface card to identify the phone calls.. A network cable is connected to the card from pbx...how to get the incoming call number using vb.net, how can i identify the e1/t1 card port. which component is using in vb.net
View 6 RepliesDo i have to implement the serial port in the interface again if i have put it in the behind code? Do have any links that can make me understand.
View 8 Repliesi need to interface an spi analog switches using either a parallel or serial port. Is this possible?
View 1 RepliesI new in vb .net. Now doing the robot mapping project from the arduino serial port and VB 2010 as a GUI. The serial port can read the text from arduino sensor but how to plot the graph from all the sensor value? So when ultrasonic detect the distance will give the pixel or point. I using the picture box as a background grip map.
[Code]...
I'm doing a project and want to do a graphical interface using V. Studio 2010. I want to use VB.NET as a programming language.
- Do I have to add any software to define VB.net?
- What is the function that reads the data from the serial port?
- If I want to receive more than one type of data, and I want to put/read them in separate text boxes, what is the function to filter the incoming data?
I have a problem interfacing with the Parallel Port. I have tried using the "inpout32.dll" to communicate with the port, but it didn't work for me. I have used another program (coded in C++), and I have successfully read the S-port-data - and that's what I mainly need the application for.
Do you guys have an "easy" way to interface with the Parallel Port using VB .Net?I don't want to use C++.
I'm mohammed from Oman ,I'm visual studio.net programmer How I can Read the Data From Barcode Weight scales By Serial port and TcpIp port
View 7 RepliesI have a Windows form.in windows form have a combo box that give me a list of available port serial with it code (Dim ports As String() =SerialPort.GetPortNames())for example( Com1,Com8,Com15,...).but I want to give me fullname of serial port in device manager for example in dvice manager is these (Comunication Port(COM1) - Printer Port(LPT1) And USB Serial Port(COM8)).how to Get it?
View 2 RepliesI would like to detect the Address and Port number of the Parallel Port in computer.
View 4 RepliesIf I uninstall the COM1 and reboot, it works. If I shut down (power off) and restart, I get the message below. If I uninstall then click on Scan for Hardware Changes,The given port name does not start with COM/com or does not resolve to a valid serial port. Parameter name:portName
View 8 RepliesI am trying to get my 4 port USB relay board to work in VB.net using the COM PORT. I found some code from a poster who has the 16 port USB relay version. When trying his code i can only get it to turn on relays 1-3 all at the same time. The product can be found here: USB 4 port relay
"01+//" - Relay 1 is switched ON
"01-//" - Relay 1 is switched OFF
"02+//" - Relay 2 is switched ON
"02-//" - Relay 2 is switched OFF
[code].....
So i am confused as to how to separate each relay out with that code above and just be able to turn on any number 1-4 relay on or off independently from each other!
how to create a user interface in a game such as the application XFire using Visual Basic?
View 3 RepliesI'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 RepliesI was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 RepliesI'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
View 1 RepliesI am trying to get my 4 port USB relay board to work in VB.net using the COM PORT. I found some code from a poster who has the 16 port USB relay version. When trying his code i can only get it to turn on relays 1-3 all at the same time. The product can be found here: USB 4 port relay I was following what the guy in the post was doing to turn his on:
[Code]...
Im having problem with the Serial Port. When i run my program, "Access to the port 'COM1' is denied". What does that mean? Im not sure whats happening because theres no error in my code. Someone suggest me to use 'COM2'. Which is also the same result. I have a microcontroller, programmed and run it. And i need to capture the data onto my vb, which is on a multiline textbox. How to i do that?Just to double check my code?
[code]...
in the codebase i'm maintaining there is an old interface. Let's call it IFoo. It pretty much became obsolete and replaced with the Interface INewFoo with a change a few weeks ago, but for backwards-compatibility purposes, i wrote a wrapper class which implements INewFoo and takes an IFoo in the constructor.To clarify, consider the following code.
Public Interface IFoo
Sub DoStuff()
End Interface[code].....
For both interfaces, the implementations are loaded by scanning a few assemblies with StructureMap. Now, let's get to the bad things. Most implementations for the old interface were put into forms for reason i can neither understand nor change. Because those tend to be displayed and disposed, i have to create a new instance every time i use ObjectFactory.GetAllInstances(Of IFoo). Thats still no problem, but i'd like to register a INewFoo-Wrapper for each registered implementation of IFoo, so that i can just use ObjectFactory.GetAllInstances(of INewFoo) and get all implementations of IFoo AND INewFoo.I can't iterate through the implementations of IFoo and register a wrapper for each one because as far as i can see, you can just register those with instances.Wrong code below:
ObjectFactory.Configure(Sub(config)
config.Scan(Sub(scan)
For Each ass In assemblies[code].....
My question is: Is it possible to register a wrapper for each implementation of IFoo which always creates a new instance of the implementation before creating a new instance of the wrapper?
I want to declare a property as an interface collection of an interface, and I want to instanciate the explicit type later, in the constructor. Something like this.
Public Class LicenseFile
Implements ILicenseFile
Public Property Collection As IList(Of ILicenseFileDataNode)
[Code]....
In short, the question is "Why It Didn't work"? This is a simplified scenario, but It's easy to take a workarround, But I need understand the reason because It's fails.
I'm using interface with relay and interface is connected to computer on COM (serial) 9 pins port. In Visual Studio 2005 I'm using this
SerialPort1.Open
SerialPort1.DtrEnable = True
SerialPort1.Breakstate = True
[code].....
i am a absolute beginner and i want to use vb to receive data from micro controller through serial port using rs232 standards, i found this code to receive the data serially, can any one tell me where should i paste this code, so that the data received will be displayed in message box.Private Sub DataReceived(ByVal sender As System.Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) HandlesSerialPort1.DataReceived
[Code]...
The link below has code to connect to a modem thru the serial port but it is for an earlier version of VB. when I convert the code, it does not fully convert and has 4 errors that prevent building the project. can someone tell me what needs to be changed or added?
[URL]
Note: the error: not CLS-Compliant
Do someone know if there is a\\ USB control for the USB port communication? like the SerialPort control for the COM port.
View 2 RepliesWhy does an interface override a class definition and violate class encapsulation? I have included two samples below, one in C# and one in VB.net?
[Code]...
I have an interface class (IUser) which is the interface of class User. Now, i want to put these into an IList but am confused as to how i should declare the IList:Dim userList As IList(Of IUser) = New List(Of IUser) Dim userList As IList(Of User) = New List(Of User) Dim userList As IList(Of IUser) = New List(Of User) Dim userList As IList(Of User) = New List(Of IUser) when instantiating should you always use its implementation; and when using it as a type use its interface?
And when im creating a new user should i use: Dim myUser as IUser = new User?
I am new to this forum as will as to VB. I am using VB6. I want to access the USB port in order to read the data at the USB port comming from my Data acquisition card.Or as a matter of fact can I also access the data from my mouse, because it also transmits the signal when ever the mouse is moving.
View 3 RepliesIt is possible to disconnect an IP in a port? I have a MMORPG server, and I need kick bad players using IP of this player.
View 2 RepliesI need to transfer data between several computers in a network using my app. I thought of using TCP ports. how to open and use them? I only want to make a file transfer and chat app that works offline.
View 3 Replies