I have it so that for each entry node in the XML file, it creates a new label then it creates a textbox under it. Both are added to a Collection so I can reference and delete them later. The label and textbox are set inside a panel container. I'm planning to make changes to the interface.
View 3 RepliesI have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
I had a master form which has a MDI container.When I was load the master form, I will also display another form inside the MDI container.But I was fail to maximize the child form to fix the MDI container. The image below is my problem Untitled2.jpg. I need to expand the form above to touch the MDI container border. (Full size in the MDi container)But I was fail even I was set the child form window state to Maximized
View 3 RepliesI am making a custom menu. I am applying colors on panels on mouse enter and mouse leave.I have labels on these panels, and the mouse enter and leave events work snappy, but as soon as I hover over the label (on/inside) the panel, the mouse leave event is fired. I know I can just do the same thing for the label mouse enter event, but I am doing some other visual stuff, and I need to have the label mouse events totally disregarded.
View 1 RepliesHow to move a label up, down, left, right inside the panel control? The label should move up when I press a "button for up", the label should move down when I press button "button for down".
View 9 RepliesI have a form on with I have a label inside a panel, with a button I can open a fontdialog and change the font of the label (inside the panel). The font (name and size) I also display in 2 textboxes. This works as far. But I also want to display in a different label (so not the same as the label inside the panel) which fontstyle is selected (at this point when I select bold, the number 1 is displayed in the label, but I want to the word Bold displayed. Also I found out that when I make the fontsize smaller, the label inside the panel isn't align in the middle of the panel.
View 1 RepliesI was trying to move some dynamic control within the parent container like panel or a group box how do i do that?
View 12 RepliesI have been using vb6 for a while, I am following a tutorial by MS to develop a basic application and a simple task cannot be completed for whatever reasons! The tutorial asks to drag the label object from the toolbox and drop in the tab control container. Then, go to the label size property and adjust the size to some different dimansion. Basic stuff, right? It won't let me do it! After I enter the new dimensions (which by the way are not large or very small), the label size (both width and height) resets back to its original dimensions! I have the vb.net sp1 installed.
View 2 Repliesim trying to do something like this
Module module1
public sub()
dim a as string[code]....
is its possible to have a link/button inside a textbox or label... or other term for that...for example.. i am populating some chapters in a book... then i would only display 250 chars from each chapter... then i would end it and add a "Read More" text in each chapter.. and when they click it.. i would populate the whole chapter of selected chapter in the textbox...
View 8 RepliesI've been struggling with something I imagined would be simple. My aim is to create a TextBox or Label with in a GroupBox using VB.net, yes I could use the Toolbox/Common Controls to do this easily, but it's a pain when planning on making more than just one or two of them
Here's my current coding to create the actual text box.
[Code]...
All that works perfectly, but how would I allow it to show up within a GroupBox?
I have a split container. the first panel is a richtextbox.. my question is how will i put a cmd on the panel 2 of the split container
View 13 RepliesI'm trying to add a DataGridView to a Split Container Panel. I am able to add the control, but it just places it on top of the old one.
What I want is to add it below the existing one.
I'm creating a chat application in asp.net. In this I'm creating tab panels in a tab container dynamically for each user. when you select a new user I'm generating a tab for him with two text boxes and send button to send messages. If he doesn't want to continue his chat I need to remove or delete that tab. Is there any way that i can remove or delete those tabs in asp.net using vb.net?
View 1 RepliesThis is the code I have been using for capturing notepad and placing it "in" one of my windows forms:
[Code]...
In my program, I want the user to be able to move an MDI child window anywhere inside the MDI container but I need it to be kept completely inside the container boundary. For example, the upper left corner should never be at a location less than 0,0 when moved left or up. Currently, if I slide the child window too far left, it extends outside of the MDI container window and the MDI container shows the bottom scroll bar.
Is there a way to prevent the child window from moving outside of the boundaries of the container window? I tried adding code to the .move (see below) so that if the new location was less than 0,0 then it reset it to 0,0 but then the child window controls flicker as the window is moved beyond 0,0 and the logic moves it back to 0,0. It appears that even though the code changes the location to 0,0 and the window shows the child moved to 0,0, when the mouse moves again, the window jump back to its unmoved location.
Private Sub MyForm_Move(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Move
If Location.X < 0 Then
[Code].....
I need to dock MS Word editor in a splitcontrol panel or any other container.
View 1 RepliesI have a textbox on a form which I load the contents of a text file into. The values for some of the properties are as follows:
Readonly = false
Wordwrap = false
Multiline = true
Scrollbars = Vertical
When the scrollbars is set to vertical, then I am able to make any changes to the text inside of the textbox, deleting, typing in new text, cutting and pasting, etc. However if the scrollbars is set to both, then the only thing I am able to do is delete the text. It does not allow me to type any text into the textbox. All the other settings are the same as before. How would I make the text region editable with scrollbars set to both?
I want to make section inside the textbox. For easiest example is like in IP address. There is several dot to separate it. and if we want to write 10.112.254.23 we just have to click 10 <tab> 11225423 We just have to input the number and if we haven't type three digit number we just have to click tab for go to the next section. In this case, for example I want to write :
L-1124-HW
Can we make the textbox automaticly show the minus (-) character and we just have to type L1124HW??
I'm trying to make a label control transparent over a Panel control.However by setting the background colour of the label to Transparent, it actually sees right through to the form itself, not the panel as intended.
As an example we use a panel with a background as white, we make the label transparent, however it gets the form�s colour as blue.However, we are using a custom panel control and need the label to be transparent over the panel and not see the forms background.
I'm trying to make a label control transparent over a Panel control. However by setting the background colour of the label to Transparent, it actually sees right through to the form itself, not the panel as intended.
As an example we use a panel with a background as white, we make the label transparent, however it gets the forms colour as blue. However, we are using a custom panel control and need the label to be transparent over the panel and not see the forms background. Is this possible?
I'm trying to make a label control transparent over a Panel control. However by setting the background colour of the label to Transparent, it actually sees right through to the form itself, not the panel as intended.
As an example we use a panel with a background as white, we make the label transparent, however it gets the forms colour as blue. However, we are using a custom panel control and need the label to be transparent over the panel and not see the forms background.
i have made a button that opens a msgbox dialog what i need is to make it show a msgbox with an empty textbox inside and an ok cancel button,so when a user clicks it,it appears and asks for an url string and then,if uses pressed ok,the url should be placed as a movie to axshochwaveflashobject like this Private Sub FromUrlToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles FromUrlToolStripMenuItem.Click If FromUrlToolStripMenuItem.Pressed Then MsgBox("emptytextbox",title "Enter the url") If MsgBoxResult = ok Then AxShockwaveFlash1.Movie = "msgbox answer"AxShockwaveFlash1.Refresh() End Sub
View 6 RepliesI'm looking for a way to insert a label into a flowlayoutpanel without it having to scroll horizontally. Therefore, autosize is out of the question. I have it right now so it doesn't exceed the flowlayoutpanel using the
[Code]...
I am in the making of creating a database desktop application using VB.NET. I want my UI to have similiarity the same as Microsoft Money. By this, now I want to make all my textbox to behave this way :
flat will have no border, or if it's still if the mouse hover on it, the border will get emphasized.That's all.I recognize that in TextButton, we have FlatAppearance, so we can tweak all Button to behave like this. But the same is not happened for TextField.
I am using a label to display a song for an mp3 player. I wanted to scroll the text inside the label for anything that is longer than the label width. I figured out the width of the label and if the width of the text inside the label is longer. But I have no idea how to turn this into subtracting parts/pixels of the text currently displayed and how to append the subtracted parts to the end of the new text.
Sub f1timer2tick()
Dim g As Graphics = f1l2.CreateGraphics
Dim s As SizeF
If f1l2.Text.Length > 19 Then
[code]....
Im trying to make a simple quiz in visual basic all it has is a label a textbox and two buttons. one of the buttons if for checking if the answer is rite while the other is to go to the next question. i want to make it so when the next question button is clicked the label changes to the next question and the textbox is cleared and then when i press check it checks the answer.
View 6 RepliesI would like to add an effect where a panel sweeps out of the way to make room for another panel. This is sort of like a sliding effect, and I think at one point in time this could be seen on Apple's website under their product pages. I came up with some code, but it isn't working.
[Code]...
So, I have a textbox with the following text.
Code:
TITLE"Hello there"
blah blah blah etc...
I want my program to find the TITLE text, and then put the text in the double quotations in a variable.
I have a panel that I am writting text into troughout the applications use. I would like to be able to make some of the words in the panel bold and others non-bold.
View 5 Replies