Populating Rdlc Reports From Data In A Form OR Data From An MDF Table

Mar 27, 2008

I have a simple windows form that i would like to send the values of a few textboxes and comboboxes to an rdlc report after saving them (I have VS 2005 standard, so no crystal reports) - it's as follows:

-1 form
-3 textboxes - textbox1, textbox2, textbox3
-1 label - label1
-1 combobox - combobox1
-5 buttons - button1, button2, button3, button4, button 5

the textboxes are labeled length, width, height the combobox is labled unit of measure and contains two options - inches or centimetres the label has text of "your total cubic inches/centimetres is:" - followed by the unit of measure selected.the buttons are labeled save, calculate, print, print preview, and exit.Having said all of the above, the save, calculate and exit button code is easy enough and is good to go - it's print and print preview i'm stuck on the solution i'm after is to take those values and send them to an rdlc report that immediately prints (calls up the default printer dialogue) without preview or anything when the print button is clicked and also have a print preview function as well for when of course the print preview button is clicked.The report has already been created with the titles mentioned above..

View 1 Replies


ADVERTISEMENT

Populating CheckedListBox With Data From A Table?

Mar 28, 2010

I have a chechedlistbox on my form in a windows project, and want to populate the checkedlist box with data that I querry from a table in sql database. I have the code below for the Form load event, but the checkedlistbox is not populated.

[Code]...

View 1 Replies

Parameter Update Reports 1 Row Updated But No Data In Table Added

Oct 13, 2011

I am getting an incorrect repsonse after an update to a table. In my RowUpdating event I have the following code which builds an Update Parameter to call an SP to update a table. I must be doing something wrong but everything runs fine. My rowsAffected variable reports 1 after the update, but the table never gets the data.[code]I found a solution that is working. On the original DataSource for the update command I needed to add the following.[code]This in essence allows the original data source to call the SP. Note: that the command type needs to stay as TEXT not Stored Procedure as one might think.

View 3 Replies

VS 2008 Populating New Form With Data?

Apr 24, 2010

What I want it to do, is when a id is selected to be modified, another form will pop up with the fields are filled in with the relative data. Every time I run this I keep getting the following error -- "Syntax error in string in query expression '(the wombat ID selected)'"when it gets to the following line of "fillformDataReader = fillformCommand.ExecuteReader()"What is going wrong and how do I go about fixing this error so the new form is populated with the correct data?

Dim fillformCommand As New OleDbCommand
Dim nameView, idView, regionView, sexView, ageView, weightView, lengthView, sampleView, commieView, descriptionView As String

[code].....

View 2 Replies

Listbox In Form That Gets Its Values From A Data Table By Data Binding

Jul 31, 2010

I have a listbox in my form that gets its values from a data table by data binding. My question is, when the data (row) is loaded it also selects the first line automatically. I do not want this because I want the listbox to select an item only when the user clicks on it. Otherwise, the iteme should ony be listed. Is there a way to manage this?

View 2 Replies

Crystal Reports To Send Data From Form

Aug 31, 2009

I am new to crystal reports and i need some help in sending data from form to Crystal report.

View 2 Replies

Dynamic Creation Of Rdlc Reports?

Dec 16, 2010

How can i add columns to rdlc report at runtime in windows based application using vb.net

View 1 Replies

Save RDLC Reports As PDF Programmaticaly?

Oct 30, 2009

I have a report that I need to run multiple times and save as PDFs. I am currently generating the report as a PDF programatically but want to save the reports without the user having to choose the save option manually each time.

The code I use to render a single report as a PDF is:

Dim warnings As Microsoft.Reporting.WebForms.Warning() = Nothing
Dim streamids As String() = Nothing
Dim mimeType As String = Nothing

[Code]....

I was figuring I could run it in a loop and save the PDF each time.

View 2 Replies

.net - Custom .ToString() Formats In .rdlc Reports?

Mar 2, 2010

I have a custom business object which overloads the .ToString() function. It also implements IFormattable.ToString, so I can define my own custom formats.This approach seems to work everywhere in my app, except .rdlc reports. For example, I have a text field on a report with the following expression:

=Fields!MyField.Value.ToString("lr")

"lr" is a custom format I have created. When running the report I always get #Error as the output. I've placed breakpoints in my .ToString function and stepped through the code as the report is running, and I know the function is returning the correct value, but the report just doesn't seem to be capable of receiving and displaying it.

View 1 Replies

Refresh Data In Rdlc Report?

Aug 30, 2010

I create a small vb 2008 Windows Form application which pick data from SQL 2005 and display in rdlc report.

Report creation and initial data load is fine.. but when i do any change to data and when i pull the report again, it does not getting refresh and still shows the old data.

View 7 Replies

RDLC 'export' Option Showing Up Behind The Data?

May 24, 2012

I developed a few rdlc files that I am using in my asp.net/vb.net project. the reports load great, but when I click 'export' in the toolbar, its showing up behind the dataI figure I could play around with Z indexes, but don't see any method explicitly for the toolbar

<asp:ReportViewer ID="ReportViewer1" runat="server" Font-Names="Verdana"
Font-Size="8pt" InteractiveDeviceInfos="(Collection)"
WaitMessageFont-Names="Verdana" WaitMessageFont-Size="14pt" Width="100%"

[code].....

View 1 Replies

Local SSRS Report (.rdlc) With Object Data Source?

Apr 15, 2011

i created more projects using ReportViewer 2005 and 2008 in local processing mode than I can count on my hands. All Visual Studio 2005 or 2008 ASP.NET web forms projects. I always used some flavor of Object data source for the reports.Tonight, I attempted to add the same functionality to a Visual Studio 2010 MVC 2 project and am failing miserably. First, the Add New Item > Reporting > Report is now a 2008 RDLC and not a 2005 RDLC report. Secondly, when trying to add a DataSet, my usual method of create a data proxy class with static methods that return IEnumerables(Of Stuff) will not show up as sources in the DataSources drop down

Thirdly, my only option is to add a Database connection. There is no "Object Data Source" to pick from: Like I kind of alluded to, I have no problems whatsoever actually rendering a report using the ReportViewer control. What I can't do is figure out how set up a Data Source in these new-fangled 2008 reports with Visual Studio 2010 so that I can pump a list of domain objects into the ReportViewer and display the report.

UPDATE: With some more research, I've found that MVC projects do not allow object data sources to be used within them. One solution for my issue is to create a separate project in the solution -- a web application, a service, or even just a class library, to add the report to and design it accordingly.'m still looking for alternatives here, so don't run away too fast!

View 3 Replies

Add One Single Item In Combobox After Populating It Form Database Table

Sep 7, 2009

i have imported names from database table into combobox..i want to add item"all" above all names..how can i just add one single item in combobox after populating it form database tabel.

View 1 Replies

Add Text Data In A Table Form?

Sep 29, 2009

What is the purpose of a table option in vb2008. Can text be added to a table. What are the other options to add text data in a table form? what does a datagridview do?

View 3 Replies

SQL - Insert Data From Table And Form Textbox

Feb 22, 2012

Inside my application, I need to insert data from two sources: table and form textbox. So I tried to use the code below, but the message box is displaying an error. (I am using vb.net)

Error:
While inserting record on table ..Syntax error (missing operator) in query

Code:
Dim con As New OleDbConnection
Dim cmd As New OleDbCommand
Try
con.ConnectionString = "Provider=Microsoft.ACE.OLEDB.12.0;
Data Source=C:UsersDellXPSDesktopmDB.accdb"
[Code] .....

View 4 Replies

Use A Table Adapter To Load Data Into A Form?

Jan 25, 2011

I'm receiving the following error when trying to use a table adapter to Load data into a form.

"Too many agruments to Public Overridable Overloads Function Fill(dataTable As BCPM_DDBODataSet.LTC_FBSDataTable) As Integer"

I'm using a TeraData backend and this is pulling up the form based on selection from search results.

Search Form:

Private Sub cmdSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSearch.Click
Me.lstResults.DataSource = Nothing

[Code]....

View 13 Replies

Filling The Datatable From Three Variable Or Putting The Three Table's Data Into One Variable And Then Producing The Data Table?

Jan 20, 2011

I have three table and I want to put the three table's data in one variable and from that variable i will produce the datatable and then want to write the data in CSV file.I am Following this step..

Void
GetDetails()
DataClasses1DataContext

[code].....

View 2 Replies

Reading Data From MYSQL Database To Form - Table?

Oct 22, 2009

I have login system and also I know how to get 1 exact row from mysql but how can I create a table which will be filled with values from mysql table?

[Code]...

View 1 Replies

Simple Data Entry Form In Via Relational Table?

Mar 21, 2012

I am creating data entry form in vb.net. I have three tables 1.orders,2. orderdetails 3.productOrderid- Primary key for Order table and foreign key for Orderdetail table.In Dataentry form , I need when I load form , value of orderid from ordertable should automatically load in orderid colum of ordertable.

View 1 Replies

New To Listview And Populating Data

Aug 19, 2009

Can someone help me with this code? I just need to make it so there is no limitation on how much data is loaded in the columns or rows, it populates very nicely for smaller comma delimited files , but if I try to load something that goes for example over to AV column, it errors out.I don't care about VIEWING this data, I am just trying to get it into a LISTVIEW so I can access the data for other methods in my code.Index was outside the bounds of the array. [code]

View 3 Replies

Populating Data In A DataGridView?

Apr 15, 2010

I have made a list of the objects that I need on the datagridview but how do I display my list items onto the grid? How can I make each of my list items populate on an individual rows?

View 2 Replies

Populating Data On Postback?

Jun 8, 2012

I would like to know if i had two columns from a database called SellerID and Product letter in a table called product, and on a new form i want to be able to combine the columns i.e if the user enters the sellerId and product ID e.g 1A in a SellerProductID in a new table on a new for i want the program to do a postback and have the Description Field be populated with the data from the Products ID Therefore the SellerID + Product letter = SellerProductID and it should select the description in the description field.

View 2 Replies

Bind Data From Text Field On Form To Database Table?

Apr 24, 2011

I am trying to bind data from a text box on my form to a field in my database table. First of all I have created a DataSet, BindingSource and Table Adapter in the forms Design view, but I am having from there. Under the properties of each text box I have set the DataBindings (Text) to the field in the table under the forms instance and DataSet rather than the Projects Data Sources. I am very rusty at Visual Studio 2005 and that is all I have to work with.

View 2 Replies

Insert Xml Data To Sql Server 2005 Table Using Windows Form?

Jan 23, 2012

I have exported data from a SQL Server table into a XML file and the output looks like this:

Filename = 11190.xml
Table name = LRTest
<NewDataSet>

[Code].....

Now I want to save the above XML file into my SQL Server 2005 table

With the same columns using vb.net windows forms, in every exported xml file there are 100 to 200 records. .

View 1 Replies

Update A Table In Dataset Without Using A Form Class Where The Data Could Be Bound?

Apr 12, 2011

I have written some functions that I have in a module. In one of the functions I would like to update a table that is in a dataset. I would like to do this with this function and not from a form class where the table could be bound. I need to call the function from various places in the application.

View 3 Replies

Populating DataGridView With Correct Data

Jul 30, 2011

[VB 2008]. I'm trying to populate a DataGridView based on information in the Items in a ListBox (specifically, the file names without hypens or file extensions) and the content of the actual files. The DataGridView is supposed to look something like this:

IDNon-Hyphenated File NameFile Data
1. Some fileThe sky is blue.
2. Another fileThe grass is green.

The Items in the ListBox (lstFiles) look like this:
C:UsersUsernameDesktopFolderAsome-file.txt
C:UsersUsernameDesktopFolderAanother-file.txt

What is happening is that the DataGridView is being populated, but it looks like this:
IDNon-Hyphenated File NameFile Data
1 Another fileThe grass is green.
2 Another fileThe grass is green.

It's adding the second file's information to the DataTable twice and not adding the first file's information at all.

Private Sub btnDoSomething_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnDoSomething.Click
Dim pattern As String = "([w:\w /]([a-zA-Z0-9-]+?).w+)"
Dim reg As Regex = New Regex(pattern, RegexOptions.IgnoreCase)
Dim mat As Match
For Each Item In lstFiles.Items
[Code] .....

View 5 Replies

Populating ListView With Access Data

Jan 4, 2012

I'm playing with an Access database file. And I want to populate a ListView control with Access data. I'm not going to use the DataGridView control. The following is my Access file, which has a table labeled Employ1 with three fields (Usernames, FNames, LNames) as you see below.

[Code]....

View 15 Replies

Unbound Populating Data Grid

Jan 27, 2009

tried quite a bit of iterations, not a local admin so i dont want to even bother using the data connection wizard, want to do all of this with unbound controls only the harder way for learning purposes and also so i dont have to keep logging in as local admin and create data sources in the future. Cant really seem to get the table to fill, it appears always with blank fields, and tried many different ways. Currently using vb. net 2005 msvs.[code]

View 9 Replies

VS 2010 Populating Listview With SQL Data

Jan 15, 2011

I googled, searched and tried houres but I can not find a simple code/class that does the following: I have a SQL database and I want to show some colums of a table in a listview... Not so difficult I thought, in VB6 it was fixed in 2 minutes but now I'm struggeling for houres... I found Imports System.Data.SqlClient but further then this, I fail...

View 3 Replies

Create A Table That Include Current Year Data And As Well As Previous Data To Be Compare

Dec 8, 2010

i want to create a table that include a current year data and as well as previous data to be compare. here is the example of the table that i want to create: but i want to compare one of the annual data with the previous year. as example i want to compare between the data of current AR of 2007 with the current AR for 2006, Current AR of 2006 with current AR for 2005 and go on~, but i have no idea how to do it.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved