Setup - LAN Keep-alive Proxy - "Home Or Small Office Network" Via The Control Panel To Access The Internet
Apr 15, 2012
I'm trying to setup sort of a LAN keep-alive proxy...Ex.: My Xbox 360 is connected strait to my computer via an ethernet cable. My computer is connected to the internet via a Wi-Fi adapter. Everything works fine and I can access the internet on the Xbox and computer.
Issue: Every time I start my Xbox I have to set up a "Home or Small Office Network" via the control panel to access the internet. What I would like to do is implement a proxy that when I shutdown the Xbox the LAN doesn't give the "Network Cable Unplugged" notification. I wasn't sure if there was a way to make the connection stay open for so long after it should say unplugged. Such as if I need to restart the system and don't want to have to re-setup the network on the computer.
This is my code to retrieve the network info:
Imports System.Net
Imports System.Net.NetworkInformation
Module Module1
[CODE]...
View 4 Replies
ADVERTISEMENT
Feb 17, 2012
i have developed a little application, which send email to me, it works on direct internet / dsl , but when i run my programm on a pc where the internet access has used a proxy server for clients, my application show a error that could not find host, and failed to send email
View 2 Replies
Jun 21, 2010
Does anyone have any experience with UDP on a home network + particularly any experience with tinyUDP (attached)? i tried running it on my network + it doesn't receive the messages.
View 6 Replies
Oct 17, 2009
Ok here is what i m trying to do.I have one pc at home which is always running and then i want to connect to that PC from my Office. For example i wanna built some VB.net program that i use from Office which sends signal/Message to the PC running at Home(There will be a VB.net program at HOME pc also which is always waiting for the incoming messages) and gets the response from that PC at home.
In General i want that my program(vb.net) at Office communicates with my Program(vb.net) at home even if there is nobody at home, so that i can share some files or may be perform some other operations at home pc even if i m away.
View 14 Replies
May 22, 2009
I need to make a web browser that uses my home internet connection from anywhere.I plan to have the web browser connect to my router/computer where it will request the desired web pages and have the page data sent back to the browser client. The browser must only have a connection with my IP, and not request the web pages from their web URL.How can i do this and what will i need to set up on my home computer?
View 5 Replies
Mar 29, 2011
I am thinking about creating a program that when a browser (such as IE) opens it will turn my connection to the internet on, and when the browser is closed it will disable my connection. What type of things do I need read upon in order to accomplish something of this nature?
View 2 Replies
Apr 3, 2011
How to make a vb.net application that allows me to play online games using web proxies?
I tried
Private Sub enableProxy()
Dim proxy as new WebProxy("115.160.178.253:80")
WebRequest.DefaultWebProxy = proxy
End Sub
But that only works for httpwebrequests.
View 1 Replies
Nov 25, 2009
How to do so in vb.net? In vb6 you do this [URL]... but then there is this as any and I wonder how to pass on the address of an object to the API also how to modify the program so we can put user authentication and password in VB using InternetSetOption
[Code]...
View 2 Replies
Jan 6, 2010
I just noticed that if I use WebClient to download an image in my VB.NET application, it will use a proxy that I have set in internet explorer (under connections->lan settings)! I don't want this to happen.. Is there a way I can use WebClient in my application but stop it from using the proxy? (but would be nice to keep the proxy set in internet explorer).
View 2 Replies
Apr 7, 2010
Background: (Office 2007 and XP Pro all Up to Data; Net Framework 3.5)Two data files are compared one to the other (in Access via VBA) to ascertain matches & non-matches. This aspect completed in Access because of Access's large datafile capacity
The matches and non-matches are passed to Excel via Offine Automation In short, I am attempting to ascertain the "Access-related" VB.NET References required in VB.Net Solution Explorer.
I have included snippets of the VBA code for examples of the Access objects.I would like some knowledge from an expert in Office Automation and VB.NET.
[Code]...
View 1 Replies
Jan 14, 2010
I am attempting to simulate a Mouse Click in Visual Basic, like the option where you can macro the mouse but not actually moving (i.e. it would click a x,y point while I am doing something else on the computer without moving my mouse, so its minimized still doing clicks. If this is not possible, is it possible with SendKeys function? If not, I know I can do it in Delphi. Another project is I need to add a Proxy Set to the IE embedded tool. How do I add a proxy set up where I can use proxies switching every time an event is called?
View 3 Replies
Mar 22, 2012
This code block of a larger program uses ms office xp spell checker. It works except, after running spell checker it brings up the word screen for a few seconds then it resumes vb session. Is there a way to not have this happen. It happens right after clicking
CHANGE in the spell checker dialog box that comes up (ms words spell checkr).
Imports Microsoft.Office.Interop
Public Class frmEditor
Dim wordObj As Word.Application
[code]....
View 5 Replies
Jul 15, 2011
I am exporting text to a worksheet with fixed column widths and there instances where the text in the cell does not fit and will obviously overlap to the cell on the right.
I'd like to prevent that overlapping by reducing the font size of the cell if it is necessary. The problem is how to check if the text does not fit.
View 6 Replies
Mar 17, 2010
I'm doing the first bit of web-page development I've done in years, in VS2008, using VB.net. I have a fairly simple layout, which is using several nested tables. IE6 displays the layout just fine, but Firefox for some reason shows the whole thing in a small panel at the top of the page, with a scrollbar.
View 1 Replies
Feb 15, 2011
I am developing a small application using VS2008, the mdiparent has a expandable panel with Button 1 and Button 2 on it, which opens up child form 1 and child form 2. ( The two child forms are maximized within the mdiparent form)
The problem is, button 1 opens child form 1 and button 2 - child form 2. I cant open the two forms randomly. I have to close the topmost form to access the other forms below it and vice versa.
View 8 Replies
Dec 29, 2010
I have a program originally compiled in VS2008 on a WindowsXP Pro box. The program uses Microsoft DAO 3.5 Object Library to access an Access database.
When I try and run the program on Windows XP (any version) it runs just fine. If I try and run in on Vista (any version) it doesn't work. When I try and run it on Windows 7 Pro, it runs fine. I really want it to run on Windows 7 Home Premium, but I get an interop error anytime I try and access the database.
View 3 Replies
Dec 29, 2010
I have a program originally compiled in VS2008 on a WindowsXP Pro box. The program uses Microsoft DAO 3.5 Object Library to access an Access database.When I try and run the program on Windows XP (any version) it runs just fine. If I try and run in on Vista (any version) it doesn't work. When I try and run it on Windows 7 Pro, it runs fine. I really want it to run on Windows 7 Home Premium, but I get an interop error anytime I try and access the
View 3 Replies
Nov 4, 2011
I found similar forum thread [URL], but he don't have answers. How I can conncect | send | recive data using tcp connection with specific internet service (not web).
View 1 Replies
Apr 29, 2012
I have a server that the server OS is windows server 2003.
I want to share internet of server.
I want to make 2 program (server and client) that client program run on a personal computer and can connect to my program that running on server and get internet from server program.Like as VPN or CCProxy.
View 9 Replies
Nov 19, 2011
This is the work of one responder for the most part, and is not indicative of the quality of most of the posts.But you can judge that for yourself.
If you are writing a program that is used to monitor the status of your network, then this thread may not be of interest.
If you are an application programmer that uses network resources to accomplish your goal, i.e. you are using SMTP, FTP, HTTP, NNTP, NTP etc., and you think that you need to check for a connection first, then read on.Follow up to this.Before getting all geeky let's take a little detour...
Five days a week I get up, eat breakfast, check my email, forums, etc., take a shower, get dressed, and then drive to school.Many of you probably have a similar routine.What is interesting about that is not what we do, but what we dont do,because of our expectations and experience.Here is what I dont do.
I dont stick my finger in the electrical socket to see if there is electricity for the coffee maker and toaster.I dont fire up the command prompt and ping some host on the internet to see if I have connectivity.I dont check the battery, tires, water level, clutch fluid level, washer fluid level, etc.,before I drive off.
All of that is based on expectation and experience.So why would you write an application that pings the internet before it did something (SMTP, FTP, HTTP, NNTP, NTP etc)???? Is your experience or expectation that the network will be down?To illustrate and hopefully convince you that, like Oblio, it is pointless, create a new form with three buttons. In the following examples I use a WebRequest / WebResponse as my 'Something'.Here is what some think is a good approach, the classic ping-then-do, what I think you shouldn't do.[code]....What is wrong with this code is that all of the network IO is being done without a Try / Catch block.
View 1 Replies
Feb 21, 2011
I want my Visual Basic.NET program to have a file in the startup path when installed.So I want the file to be in my msi Setup file.How can I add this file respectively where can I say that this file should be added to the setup file?I hope I posted this in the right section of this forum.
View 1 Replies
Jul 2, 2010
i am trying to figure out the vb code to convert user input from a windows application and use them in the internet connection wizard to automatically setup up a dial up internet connection in XP. i've got the interface designed, i just can't find any of the vb commands to access the wizard or perform the function of the wizard
View 3 Replies
Apr 26, 2011
Title says it all "Detecting internet Inactivity in VB.NET"
View 1 Replies
Jan 1, 2012
How would i go about seting up a local database to store data so it can be used offline then to sync up with SQL server 2008 r2. i've got to the point of having a test project with a local DB that stores the data and a test SQL server but know idea how to set it up to sync with between databases.
View 2 Replies
Jan 26, 2011
If I decide to build this, this would probably be my first "large" project i've ever done myself.What I am looking to build is a very simple Chat/IM client to use for the users in our office network. It would just call us their Windows logon name and use that to IM and the like. I'm talking a very simple client, with a list of names of people who are logged into the network, and option to IM them and an option to do a multiple user chat. It doesn't have to be visually stunning.
View 1 Replies
Apr 1, 2011
Using the code below i will get all network interfaces wich are enabled and functional on the machine.
Private netIntrfc As NetworkInterface() = NetworkInterface.GetAllNetworkInterfaces()
For i As Integer = 0 To netIntrfc.Length - 1
If netIntrfc(i).OperationalStatus = OperationalStatus.Up Then
[code]....
But my problem is how to get the default one, the one(ethernet adapter) through wich user is connected to internet?I need to change some settings of default(through wich user is connected to internet) adapter. settings i change through registry so i could sample add same settings for each network interface but that could cause problems and makes no point then?
EDITED:for now i have done like code below, so if this can help someone other...
Dim u As UdpClient = New UdpClient(System.Net.Dns.GetHostName, 1)
Dim localAddr As IPAddress = CType(u.Client.LocalEndPoint, IPEndPoint).Address
Private netIntrfc As NetworkInterface() = NetworkInterface.GetAllNetworkInterfaces()
[code]....
View 1 Replies
Jun 12, 2009
Developing an installer for an application, that runs based on parameters set in an XML file.
The initial install of the XML is in a template style (generic time for running app, generic settings), but via the Forms, I want to be able to have the user modify some of those parameters -say choosing time for the app to run- and then have the form write (Replace really) that data in the XML file.
Looking for some ideas as to how to approach this, as soon as I can catch on I will be able to do the rest on my own.
View 6 Replies
Feb 4, 2011
I've been working on my game for a while, in a non-online multi-player state it is complete. My goal is to add LAN or Internet Play support.My game is coded in Microsoft Visual Basic 2010 Express, It relies heavily on timers.Currently you play against the AI, and there is a Local multiplayer mode, using mice, controllers or the keyboard.At the moment, it is a two player, (Or 1 player against the AI) game, from my understanding the standard Client-to-Server option wouldn't very efficent, the best choice would be a peer-to-peer system.That being said, a lot of the stuff could be done client side, like for instance, the particle engine and Dynamic Rendering.[code]
View 1 Replies
Dec 20, 2010
I have no idea how to do this, using a webbrowser in VB(the normal one or, micorosoft webbrowser?)or can this be done using a Webrequest or webclient in VB.net.[code]...
All I want is the website Im trying to visit to think that I visited it with this proxy's IP.I know this is possible because ther are websites where you only type the URL in a textbox and it starts surfing for you like("planetmuffin.com"). How can this be possible on a website and not on Vb.net?
View 2 Replies
Dec 20, 2010
Im trying to access(just as if I really visited that website) using a proxy, so that my real IP doesn't display for security reasons. I have no idea how to do this, using a webbrowser in VB(the normal one or, micorosoft webbrowser?) or can this be done using a Webrequest or webclient in VB.net.
So far I used this code and I dont think it works?:
Code:
Imports System.Net
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]....
All I want is the website Im trying to visit to think that I visited it with this proxy's IP. I know this is possible because ther are websites where you only type the URL in a textbox and it starts surfing for you like("planetmuffin.com"). How can this be possible on a website and not on Vb.net? It is not neccesary for me to see the website, as long as it thinks I visited it!
I know it should be possible because Ive seen music downloaders in which you can use a proxy for the download.
View 2 Replies
