Starting The Program And When The Program Get To The Breakpoint?
Jan 28, 2011
I have used Visual Basic 2008 successfully before.Now i have installed Visual Studio 2010 and want to debug an application i am writing.When in the source code (VB) i can't add a breakpoint using F9 nor by ckicking in the leftmost margin. I can only open the breakpoint window after closing the source code and then add a new breakpoint.
Then when starting the program and when the program get to the breakpoint it stops and show the code with the arrow representing the next line of code to be executed. Then i should be able to step into the code using F8, but nothing happens.
I am using Visual Studio 2010 Version 10.0.30319.1 RTMRel with .NET Framework Version 4.0.30319 RTMRel under Windows XP Pro x86 with Service Pack 3.
I was wondering if it was possible to start an application from USB stick without the need of installing the dotnet framework on the system? Like implement the framework in the application or install it on the USB stick itself.
I am just starting to program with Visual Basic 2008. I would consider myself at a Beginner - Intermedite level of programming with VB and looking to get better. I noticed that in other language forums on this site that there were program suggestions but didnt see one here so I thought i'd ask.
I have an executable (EXE) that I would like to run from within my VB.NET program. I've looked into Process.Start("[PATH][EXE]"), where PATH is the path to my executable, and EXE is the name of the executable. However this throws an error, saying "The parameter is incorrect". I've managed to avoid this error with the following
I have built and deployed an application in VB2008. If I start the program from the start menu a new session will start and there 'll be multiple sessions of the same programming running. I dont want this behaviour! I want the program to start only when no other session of the same program is running. How can I do that in VB2008?
how to PROPERLY make a multi-tabbed or multi-window application that can handle file start requests.
For example, on startup my "Desktop Application" runs and sits there waiting for a task, either through the main menu, or for a file to display in a window. Now the problem is simple, how can I make this already running program load the dropped file (dropped on the executable (!)), instead of starting a new instance.
I understand I will have to check if the process is running, and if so, do some stuff with it. But the problem is passing the message to the active program.
Previously I used text files with paths/arguments in them, but I don't like the idea of the OS/program checking every 500 ms if a file is created in the "load this" folder...
Then I thought of sending a message using "Send Message", for example changing the text in a textbox and handle the "Text Changed" event, but is this reliable? Can any other program interfere with it?
So, basically I need the proper way of doing all of this. For example, Microsoft Visual Studio does this nicely, and no lag whatsoever...
How do I start writing a program that has 6 text boxes. A person would enter a member number if they have one, number of movies rented at $1.80 a piece. A Text box should then display Total Rental Price, and if a member number was entered, a 10% discount is given (the total of the discount shows up in another text box) and after there discount is applied the Amount Due is displayed in yet another Text Box.
This is all supposed to happed when the customer clicks on a calculation button named: Button1
This is what I have so far, but I don't even know if this is correct, as I am getting 1 error relating to a name not being declared. Please help and clue me in to where to start!
Public Class Bonanza Private Sub memberNumberBox_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles memberNumberBox.TextChanged
I recently installed Visual Studio 2010 which caused the same error, every time i try to start the program i get this message. i am using windows 7 professional 64bit i only have one user account, and i am the computer administartor. every other program works fine but visual studio programs.
I have a solution with number of projects developed in Visual Studio 2005 and the breakpoint is not working displaying message 'the breakpoint will not be currently hit' No symbols have been loaded for this document. I have tried solutions/suggestions in the forum and none is working. I have deleted the obj and bin directories and nothing worked. Selecting the Debug Menu, Windows, Modules option I can only see the pdb files for some projects (dlls) and cannot see for the project I'm debugging.
Had this matter on Xp machine and visual studio 2010 ultimate after windows update between december and january: even the simplest windows form program crash on start when starting for debug (inside Ide, F5) unless putting breakpoints on each line of the autogenerated (and marked as "debugger step thorugh") code.(see: [URL]) I was wondering if this matter affects only Xp machines, or if someone with Seven or Vista had same matter.
I am making a program that NEEDS to be password protected, so i made a textbox with a code so that when the user enters the right password it lets you in. But if the user/person enters a wrong password 2X it will kick you out. So is there a way to keep the
I wrote this VB program to be able to throw a device we developed into programming mode where we use an ATMEL Flip installer to upload new firmware. I can program one device after another running the application off of Visual Studio Express 2010 or Visual Studio 2010, but when I go to publish this file and run it on another machine, it becomes unstable and crashes after each upload. On those same computers if I run the raw unpackaged program under Visual Studio Express, the system does not crash, and I can program devices repeatedly.
Dim IncomingCommand As String = e.CommandLine.Item(0).ToString
If IncomingCommand.Substring(0, 2) = "-1" Then
form1.close()
End If
End If
I am trying to make the program close if the -1 string is sent with the program. See my installer allows for me to run certain programs before it actually installs, but it doesn't shut down copies of the program itself. So I have a next startup instance set to shut the program down if the -1 is received. But if the program is not running it starts up instead. This is not desired. form1.close doesn't work. e.cancel = true doesn't work, etc etc. What can I do to make the program not start during this instance.
Ok major problem with a paint program i am making. When i have a window overlap or anything and move to side of screen and minimize and maximize i lose whats in the picturebox...Here is an example of the code I use to draw a line after click a button:
Private Sub btndraw_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnlinedraw.Click lxs = txtslinelocationx.Text lxe = txtelinelocationx.Text[code].....
Here is a picture of my program running: How do I stop everything being deleted when things pass it...? how can i add a save feature to this program?
I have my rpg, still, first time working on it n ages, and I want each user to be able to set their own personalized picture background for the game...
each character in the game has its own dedicated folder for each file that the character has relating to it...
what I want to know how to do, is to have my game copy the loaded/chosen background image to their respective characters data folder, and have the game reload/reset the games default background image, to the one piced by he player...I am having a hard time figuring out how to do this however...I've tried a lot of different things...and nothing is working yet...
I am creating a very simple Voting System, that will be use on electing new set of officer in a teacher cooperative...
So I have to create two separate program, a Server Program that will manage all the information in the election and a Client Program where voters will vote their selected candidate...
The election officers wanted that the Server Program will display the Voting Results at real time... So when the Voter finished voting, The Voting Result displayed by the Server Program will also be updated every time the Client Program Insert the data to Database....
An action listener in Server Program that will execute if new data is inserted in a Table in the Database made by the Client Program...
how i can write a program to create a shortcut in the startup folder of a different program. So i have one program on my computer that should run at startup, i just need another program to create a shortcut to it, and then copy this shortcut into the startup folder.
I've been working on a program that generates a batch file, then when you press a button, it executes that batch file. There are multiple batch files attached to each item in the list box.
[code]...
The only thing that it does when I press the button, is starts the batch file, then goes to function searchtitle, which executes the batch file again when it finds out it didn't work properly.The button text doesn't change, none of the items are being added to my first list box, and I can't do anything to the window after pressing the button. It constantly opens the batch file every 5 seconds or so.
How can you add a image where when you double click on the icon and the program starts it shows a picture before the program loads. Like Photoshop startup or the new 2010 visual Basic express start up
I have a procedure at the end of my console application that ask the user to either hit enter to end the program, or type s to perform another search. The issue I'm having is no matter what the user types in the program end. What I would like to happen is if the user types s, then the program starts over and lets the user perform another search. The program is procedural and I need to find a way to start back off at the top of the program which ask the user to type a name to search.
Anyway, I'm a teacher and am writing a program that simply shows kids a word on a flashcard. There are 2 buttons, 1 to read the word and 1 to go to a new work. There are going to be 300 words. Really I'm just testing it right here. What I want to know is should I be inputting all the words right into the code like I did with "hi" and "not 1" (Don't ask. those are just the 2 random words I picked to test this out with). OR is there a better way (maybe somehow to type all the words on a text file and have the program randomly pull one of them (I don't know how to do this).
Here is the code so far:
Public Class Form1 Dim word Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
