Text In The Textbox Is Becoming Transparent?

Mar 20, 2011

It's been a while since I've had a VB issue, but every so often one pops up. Today I'm trying to add a textbox to a form which has aero glass on it. The problem is that the text in the textbox is becoming transparent. Here's an image of what happens when I debug my project:

I have looked into lots of articles on CodeProject, etc. But none of them seem to adress this issue (some let you paint labels to aero-glassed areas, but there are none which I can find which can deal with textboxes or comboboxes. how I could make sure that the text on the textbox is always black no matter what is behind the aero glass. I know it's possible because of IE8.

I've looked into the Control.Paint event, but I'm not sure how I could make sure that the text color is always black. Putting my textbox inside another control (say a Panel) does not prevent the transparent effect from happening.

View 4 Replies


ADVERTISEMENT

Making Text In A Textbox Transparent?

Jan 19, 2011

I am trying to make some Text in a Textbox become Transparant gradually to the point where it disappears - it this possible in VB08 Express?

View 3 Replies

Make Part That Drops Down Semi-transparent Or Completely Transparent Resembling Floating Text?

Oct 27, 2010

[code] how to make the part that drops down semi-transparent or completely transparent resembling floating text. So that I can see the form underneath.

View 1 Replies

How To Make TextBox Transparent

Sep 11, 2007

Can I make TextBox transparent?

View 8 Replies

Make A TextBox Transparent?

Jun 17, 2010

Is it possible to make a TextBox transparent?

I have a form that has a gradient background and I need the textbox to allow the user to type into and it shows the text and the blinking cursor carrot when it has focus, other than that it's totally transparent, like a label.

View 1 Replies

TextBox - In A Transparent Form

Dec 6, 2009

I set form.Opacity = 0.5, textbox1.Multiline = True, textbox1.Height = 60. when running the code, i key-in any text in Textbox, until textbox's Vertical scrollbar visible, when i move up the scrollbar, system hang and wait few minute then system become normal back.

View 1 Replies

Transparent Textbox Or Label

Mar 1, 2011

I'm new to VB 2005. I've worked with VB5 for many years. I can't find anyway to make my text boxes and labels transparent in VB 2005 as I could in VB5(Backgrounds).

View 3 Replies

VS 2008 Transparent Textbox?

Sep 2, 2009

i need transparent textbox in vb.net. I did in vb6 by using the fm20.dll.By adding referneces that dll i got the control. After applying the transparency, stil its in opaque mode oly

View 8 Replies

Any Way To Create Transparent Background On Textbox?

Mar 2, 2009

How to create a transparent background over textbox?

View 1 Replies

VS 2010 Transparent/Background On Rich Text Box Or Text Box?

Mar 17, 2012

I've been wanting to create a look like the attached jpeg Ive been looking around for a few hours for a solution to make text boxes transparent or have a background image. I've found a few projects on this form and elsewhere which include transparent text boxes, but every time I try to use it the way I need to--with the text box over a picture box--there are always various rendering errors. Most of the time, the text box is transparent if its just placed on the form (not over any other controls). But when I place them over other controls (like picture boxes), the 'transparent background' always take on the color of the form background.

This is one that I was trying to use. I found a few others around, but they all had the same render errors more or less.[URL]...I figured transparency or background images would have been supported natively. Anyone have any ideas? Maybe I missed something in my searches. I didn't really see anything which adds background images in text boxes (rich or otherwise). At this point, I'd just like anything that works, so it doesn't really need to have transparency--just a simple background image would be great.

View 9 Replies

VS 2008 - Showing Textbox Behind Transparent Progressbar?

Oct 25, 2009

I was able to make my progress bar transparent, and I have a textbox, I want to see what's in the textbox behind the progress bar, but the progress bar it's not not showing it.
ProgressBar1.BackColor = Me.BackColor
me.backcolor = transparent

View 6 Replies

VS 2008 Unable To Have A Transparent Textbox By Using A Label?

Sep 13, 2009

I'm trying to evade the problem of being unable to have a transparent textbox by using a label. When the label is selected, it selects the info in a textbox elsewhere. Then using Textbox.changed, i stream the text to the label. Maybe the code will make sense:

Private Sub UserLabelClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles UserLabel.Click
UserTB.SelectAll()
End Sub

[code]....

But the text is not selected and therefore cannot be changed.

View 9 Replies

The Glass Effect Causes Any Text In The Text Box To Be Transparent?

May 13, 2009

I've successfully used DwmExtendFrameIntoClientArea from dwmapi.dll. It adds glass to about 40 pixels down from the top, and 40 pixels up from the bottom. I can put a button on the glass and either set it's background color to transparent or it's UseCompatibleTextRendering = True so that is displays correctly on the glass (the middle part of the form is a regular form, I can put controls there fine). Now, here's my problem... I want to put a search text box at the top right hand section of the form on the glass (similiar to IE and other wizard like glass forms that have search boxes integrated). Also, this is a WinForm.

The problem:The glass effect causes any text in the text box to be transparent, I need to know how to get around it so the text box is always opaque.

What I've tried:

1.) Manually drawing the transparent color over the form in the Paint event, skipping the section where the text box is located (doesn't work).

2.) Change the color of the text in the text box so it's not black (since black triggers the glass effect). I couldn't get the glass to work at all with any color other than black (even when I set the form's transparcy key to another color).

3.) I've read and followed every FAQ / instruction list I could get my hands on to no avail (most were from 2006 before Vista in production).

4.) I've looked with UI Spy at the text box in the IE glass section, and that text box has a background color of transparent (which I tried and the .Net textbox/richtextbox don't allow you to set a background color of transparent)

I've read that you can create a custom control and custom draw it to be opaque, but I'm not sure where to start with that (I can make custom controls, but as per drawing them myself I need a little direction).

View 6 Replies

Make A Text/label Transparent?

Oct 25, 2009

Is there a way to make a text/label transparent or another way to show text over a picture (photo)With transperant bagground

View 5 Replies

Make Userform Transparent But Have Non-transparent Controls?

Mar 7, 2008

Question:Is it possible to make a userform transparent but have non-transparent controls?I notice changing the opacity of the userform will change the opacity of controls embedded on it.

View 9 Replies

Draw Semi-transparent Text On A Graphics Object?

Mar 15, 2010

I want to draw a text with 32 bit transparency on a graphics object. When I try, I only get black color in the result.

If I try to draw a line with the same semitransparent color, it works perfectly.

I have this code:

lBitmap As New Bitmap(32, 32, PixelFormat.Format32bppArgb)
lGraphic As Graphics = Graphics.FromImage(lBitmap)
lGraphic.SmoothingMode = SmoothingMode.HighQuality

[Code]...

I was thinking it may be that SolidBrush does not support transparency, but I found a predefined brush named Transparent (Brushes.Transparent) that was a SolidBrush when I looked at it in debug. I tried to use Brushes.Transparent as the brush when drawing the text, and it was successfully not showing at all. That means I get full transparency to work, but not partial transparency.

View 2 Replies

Label.Text = Val(Textbox.Text) / (Textbox.Text) - How To Obtain The Info

Dec 7, 2010

LblPPG.Text = Val(TextBoxPP.Text) / (TextBoxQTY.Text)

This is the only way I know how to obtain the info I need for this equation but if generated again with no input from the textboxes I get an error. Is there anyway to bypass this if its generated a second time with no inputs?

View 12 Replies

Aero Theme Buttons - How To Make Text Show Just Color Not Transparent

Dec 10, 2011

after many weeks of annoying compatibility with windows xp, I realized that I should change the .netbar buttons to standard windows buttons. When I did this, and put the button on the transparency area and then debugged the application. I found out that the transparency add-in made the text inside the button transparent: How can I make the text show just the color, not transparent?

View 3 Replies

Interface And Graphics :: Transparent Label Text / Forecolour Defaults To Gray At Runtime

Dec 5, 2009

I'm a second year A-level student (12th Grade U.S. equivalent) studying Computing, Physics and Maths. I like anime, PC gaming, climbing and mountaineering. That's an insight to who I am. Thought I'd add it here to my first post since I couldn't spot and introductions section.

[Code]...

View 7 Replies

Setting Textbox Text Equal To Textbox Text On A Different Form?

Aug 6, 2009

is it possible in design mode to set the textbox text property to the text property of a textbox in a different form in vb.net?

View 1 Replies

Create A New Textbox Every Time Previous Textbox.text Is Entered?

Jan 16, 2010

How to create a new textbox every time previous textbox.text is entered?

View 7 Replies

Put Text Of Dynamic Textbox In Some Other Textbox When User Changes The Selectedindex Of A List?

Apr 5, 2012

I am trying to put text of my dynamic textbox in some other textbox when user changes the selectedindex of a list.But dont know why it is giving me error's.

Private Sub UserText_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles UserText.TextChanged
If Me.ListBox1.SelectedIndex >= 0 Then
If TBnew.createdTB(Me.ListBox1.SelectedIndex) = 1 Then

[code]....

View 7 Replies

Text In Textbox In Gray That Dissapears When The User Clicks In The Textbox?

Oct 27, 2009

I want a text in my textbox in gray that dissapears when the user clicks in the textbox.I am not sure if that is a good enough explanaition so here is an example:You often have search boxes on websites or application.In the searchbox there often is a text like "search", "keyword", "type here".As soon as you click with your mouse inside the textbox it dissapears.I could make this in code but I was wondering if there already is a textbox property for this?

View 8 Replies

Have A Textbox In Application With Button To Submit Text Thats In Textbox

Mar 25, 2010

I have a textbox in my Application with a button to submit the text thats in the textbox..But i want to be able to hit the Return Key on the Keyboard to do the same action as the button how do i do this any ideas?

View 8 Replies

Textbox Countdown That Will Display Text In A Textbox In Days?

Jul 21, 2009

I need code for a textbox countdown that will display text in a textbox in days.

View 13 Replies

Bold Text In A Textbox Or Rich Textbox?

Mar 9, 2011

How do I do text formatting in a Text Box? I want to bold a selection on a textbox without affecting the rest of the text. HOw do I do this with Textbox and RichText formattting?

View 1 Replies

Create An Array For Textbox / E.g. TextBox(a).Text?

Jun 11, 2011

I'm creating a program which you can fill in a number of boxes and then send it as an email. I would like to know if there is a way to create some form of array out of all my textboxes so that i can save time on the email.For example,

For i = 1
EmailCont = TextBox(i).Text
Next

View 7 Replies

Forms :: Text From The 3 Textbox To My Textbox In Form2?

Jan 3, 2011

I will try to explain what i want to do.I have make 3 textbox in form1 And i have a form2 where i have a Textbox ( Multiline )What i want i want to have the text from the 3 textbox to my textbox in form2.

textboxt1.text = tennis
textboxt2.text = boys
textboxt3.text = 01-01-2011

[Code]...

View 10 Replies

Print Text From TextBox To The TextBox On The Inte

Feb 1, 2011

I'm using vb2008 and Internet Explorer 8 in Windiows 7 Is that possible to print text from TextBox to the TextBox on the Internet Explorer like (Port box or address box in connection part )?

View 1 Replies

Listbox.Text Into Combobox.text / Textbox.text

Dec 22, 2011

I am making a webbrowser and it has a history listbox(so it is always changing). I would like it so that if you double click on a listbox item or click on button5, axwebbrowser1 will goto the selected item, then the history form will close. [code]

View 16 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved