when i run the application it gives an error "there is no source code available for the current location". Even i try to debug using f8 and msgbox in all forms,It doesn go thru it.I dont know what goes wrong with my application.All the while it goes perfectly alright.what does this error message meant and why all the way in sudden it happens to be like this?
View 2 RepliesI have a WinForms app in a single project written in VB.Net 2003 (legacy code). There is a MainForm and a SecondaryForm that is run by the MainForm. When I run the app thru the MainForm, I can debug with no problem. However, if I just run the SecondaryForm, I get the debug error, "There is no source code available for the current location", when stepping over,_routeId = CInt(myVar)
At this point I am no longer able to debug thru my code window, but have to use the disassembled code.
If FileExt = ".doc" Or FileExt = ".rtf" Then
Dim m_oDocument As DSOFile.OleDocumentPropertiesClass = New DSOFile.OleDocumentPropertiesClass
[Code].....
given that I have DSO OLE document Reader 2.1 referenced, can one of you tell me why it stops dead on m_oDocument.Open with the following (non)error!??
"There is no source code for the current location"
I've seen less helpful error messages, but this one takes the cake!!
Since all I'm trying to do is read the Author and Title properties form a document
I recently completed my first book and am looking for a project to create. I want something simple that has a bunch of different features in it. Can anyone recommend a good project? I am going to try tic-tac-toe.
How do you set a location from source code? I tried : button.Location.X = button.Location.X + 10
I want to use one button and one textbox to view the HTML Source Code for current Web Pages,or use vbscript(but not use the method of xmlhttp)
View 6 RepliesI want my form to navaigate into a link then open up the source code of that page it navigated to . Then get a link from the source code then display it on a textbox .Here's an example : i want this link in a source code :
http%3A%2F%2Fanime-omnibus.ning.com%2Fvideo%2Fvideo%2FshowPlayerConfig%3Fid%3D3382149%253AVideo%253A160429%26ck%3D-
This link is located just beside :
config=
That is:
config=http%3A%2F%2Fanime-omnibus.ning.com%2Fvideo%2Fvideo%2FshowPlayerConfig%3Fid%3D3382149%253AVideo%253A160429%26ck%3D-
How can i make my form to navigate into the source code and get the link beside config word . I know it is possible to do it , just don't know the function to do it .
How do I convert a VB4 source code to VB10 source code?
View 3 RepliesI don't know what this is called so I've struggled to find an answer from google but I have a vague memory of it from t'old days.I've sub-classed (* see below) about 8 framework controls, overriden some properties and added some functionality into each one.The changes I have made are identical in every case. If I make a change, I have to go through each class and apply the same change there.I was hoping there may be a keyword such as <IncludeSourcefile "common.vb> that I can put into each class.
(* note) I use the term sub-classed but I don't know if that's the correct terminology. I've also seen it used for call-backs. Is sub-classed the correct term to use?
Way to space out the source code of a web page, having each tag on one line, without having to search for each tag ending and then making a new line after.
My code for obtaining the source code is:
CODE:
Also if anyone knows a way to colour the tags.
How do I set the current image location in vb.net if I use the drag and drop even.It seems like the imagelocation doesn't work because I tried outputting the image location using messagebox. But it didn't show up anything. How do I get the image location of the file that I have just drop into the picturebox so that I could transfer it on another directory?
Private Sub pb_DragDrop(ByVal sender As Object, ByVal e As System.Windows.Forms.DragEventArgs) Handles pb.DragDrop
Dim FileToMove As String
Dim MoveLocation As String
Try
[code]....
The Datagrid is inside a TabItem. The error occurs when, after cleaning and filling the Datagrid with new items, I select the Tabitem with the Datagrid inside. Until I don't try to "see" the Datagrid, there's no problem.Error (translated fm italian): "Source code not available for the current path"In the details I find:Message: "The Visual specified is not an ancestor of this Visual"TargetSite.Name: "TrySimpleTransformToAncestor"StackTrace is very long, if you wont I'll post it.The error occurs always with some specific data, but I can't find anything different in these data from all the other data.These data cause the error (example row):
imgMarcaPath: imgfornam/4.jpg
ArticleNormName: Filtro olio
BrandName: MANN-FILTER
[code].....
I am running a ssis package from .net code.It's a simple package that imports a text file into a sql database.[code]...
View 10 RepliesI want the location of the current execution project i.e in VB.NET/C# or the current class file's path? Ok,let me elaborate i got 2 projects in one solution file,lets say A,B are projects, my startup project is B ,and im accessing a class file in A ,now i need to know virtual path of B. because i need it for accessing the resource file coz error pops up when using ExpressionBuilderContext
View 3 RepliesI would like to get the color of a pixel at my current mouse location, when the mouse is clicked. The location is anything on the screen, not just a jpg, gif, png, etc..
View 1 RepliesI am creating a database application via visual studio, using VB.NET and with an access database. I've connected them and have been using them fine so far however I've had to make some changes to the original access database. I am unable to find an obvious way to update the current dataset object within the project from the new updated source file. My database has this new schema but the dataset has the old one so its causing conflicts. The only way I've found to do this in the past is to manually update the dataset with the changes I've made in the access file, so actually doing the same thing twice! Surely this isn't the only way? The changes I've recently made are massive so will take sometime to have to do it all again. If I delete the current datasource object and add it again, there are many errors left from the deletion. If I manually try to update the files, there's always some hidden ones I've missed. Ive found some sort of guide for updating the datasource via the dataset but what I want to do is the opposite!
View 4 RepliesIs there any way to set the crystal report data source location to the application.startup-path?
have a nice day
In VS2005, how could you get the current web page's source in VB.net's webbrowser object? I need to load a webpage up, and then grab everything out of the header and body tags, and then I want to replace some text inside of those tags, and then reshow the page with the updated source.
View 1 RepliesI'm doing an ADDNEW on a BINDING SOURCE. After I add the row and endedit and update and all - the current item is not changed to that new row.
It remains at the first row.
Dim drv As DataRowView = DirectCast(vendorfileBS.AddNew(), DataRowView)
drv(0) = vendorfiletype
drv(1) = vendorfilename
[Code].....
After I published my application and then installed it to the same computer i used to develop the application, there was an error during the installation, the data source file was not found in the new location set by VBE 2010. How to make sure data source file will be installed at the pre-defined location? so that there will be no installation error.
View 9 RepliesAs I have no idea on how to retrieve access data at the specific location in the table, so I wrote VBA code t export the entire access database to a datagridview which is located in the form1. There's a column of datagridview contain complete address information of a image. I'm thinking a way to link image source (of form 2 or xaml file) to the the column so that the image will be displayed. is there any code to get cell value at the specific location in the table? In excel VBA, sheets("Sheetname").Cells(rownumber, columnnumber).value is used to get the cell value, but how about code for this case?
View 2 RepliesSince I had some trouble with my Windows Media Player playlists lately, after moving the music from one HDD to another, I decided to try my hand at my own playlist manager / editor. I've got a few ideas that I think may make it very useful, even if it's just for myself (I'm finally starting to worry about organizing my music as it's getting a little crowded now).
[Code]...
i am searching for gtalk open source code if anybody knows please let me know I need it urgently
View 1 RepliesA source code with the DirectInput code and yes i have been googling it and couldn't find one for vbnet yah that would be great to have it just Namespace blah blah function blah blah and this is how u use Directinput("0") or sumthn like that
View 10 Repliesi have previously build DLL file (VB 6.0) with me. Is there any possibility to get the source code from VB 6.0 DLL? I know that we can get code from a .NET assembly using Lutz royers .Net Reflector, but i have VB 6.0 DLL.
View 3 RepliesIs it possible to get source code from dll ? It's a vb.net web application.
View 6 RepliesI have a .exe which was created in VB.net about 4 years ago. Due to some upgrades the .exe doesn't work as it used to.I no longer have the source code and really need to get this program to work. Problem is my knowledge with coding is VERY basic. I was wondering if there was a way to extract the code from the source code from the .exe. I've done some googleing and from what i've gathered it's impossible to get the original source code. Is this true?
View 2 RepliesIm in need of somehow a code that with a picturebox, depending on WHERE you click it will do something.
Lets say theres a picture of a face. The eyes are at like x = 12, y = 28 , if the user clicks the picturebox around that area a msgbox will come up saying "Eye" or something, this is just an example
<!DOCTYPE HTML PUBLIC "-W3CDTD HTML 4.01 TransitionalEN">
<html>
<head>
[CODE]..........
Any way to "convert" this code to vb.net?
The problem that I am having is the randomization. Obviously, the game wouldn't be very fun if the cards where in the same position every time. For this reason, I want the cards to be in a random position every time the game runs. I'm using buttons as the cards, so I guess, put simply, I want to be able to have the cards have a different location, out of 12 preset locations each time.
View 9 RepliesHow can I set properties like the Padding and Location in code?
View 3 RepliesI completed my first college assignment using visual basic 2005 express (Their first lesson was same)
and in order to submit it to my my proffessor I have to change the source code from a .sln to a .c or .cpp,how do I do this?