Use A Database In A Distributing Environment With IP Address To The Server Pc?
Jun 8, 2011
On my current project, posted here [URL]
I already made a project using Visual Studio 2010 (Visual Basic) and my database connected to SQL Server 2008 R2, also set up a PC 1 act as a server and the other is client i set this up for beta test.
I'm having issue about putting an IP Address to the server pc, actually if the IP setting of the server pc "Obtain IP Address automatically", i can open my application in the client pc, but once i put IP Address on the server PC i cannot open/run my application to the client pc, i cant figure it out how can i fixed this issue.
View 5 Replies
ADVERTISEMENT
Jul 14, 2010
I am using Microsoft visual basic 2010 and SQL server 2008.I develop a small database application and it run well on my pc.I built and distributed the application to other pc on the same network, but when I run the application from other pc I got error message like this:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)[code]
View 2 Replies
Dec 1, 2008
desktop application I need to refer and load some files to manipulate (Like dBase III .dbf files) or to show (ESRI .shp files). As the number of my files changes, I need to have these files on a server and then when I want to load them in my desktop application give the path on my server based on IP address and Port number
View 1 Replies
Jan 24, 2011
i made this thread and faraz zone made a guide for me, I keep doing the guide but i keep getting this error: url...untill now, now i end up reformatting my notebook and i try to do again Faraz Zone guide and i still keep getting that error, now I decided to make this new Question/ Thread.I already made my vb.net project using Microsoft Visual Studio 2010 that has database and multiple forms, and I already installed SQL Server 2008 R2. I want my project to be remote/network using lan environment, in what way i can do this?
View 1 Replies
Sep 8, 2011
I have this code:
[Code]...
View 12 Replies
Jun 22, 2009
for my vb project, i have to develop a system for a network environment. it means a central database to the application. i don't know how to do that. i am hoping to do a sql database. guyz please help me to do this.if you have any tutorials or any of your advices, will help me a lot.
View 1 Replies
Jun 13, 2011
I just created my first VB.net project using Microsoft Visual Studio 2010 that has database(.mdf) and some forms?I want my project to be remote/network using lan environment, in what way i can do this?i keep goggling i can't find the answer so i end up in your site, I already install SQL Server 2008 R2 in my PC, and i already set up 2 computer here in my house 1 act as a server and the other is client using Lan.
View 16 Replies
May 12, 2009
Why would database drivers work in the development environment of VB.Net and not once the project is built and installed on the same pc? I've tried the MS ODBC Oracle driver. I've tried various ODBC datasources. All work when I am in the development environment but none once I build and install. No matter whether the configuration is Debug or Release. This is the only project having this problem. I have other apps (VB.Net) that access the same database (Oracle 9.2) with no problem.The environment variables are the same during both types of runs. The error messages vary depending upon the driver being used.
View 1 Replies
Oct 31, 2009
How open password protected MS access database in MS access environment from vb 2005 code
View 1 Replies
Jul 2, 2009
I have the following function that works on a 32 bit machine but fails on a 64 bit Windows 2008 server
[Code].....
This line "New System.Net.IPAddress(.AddressList(0).Address)" gives me a socket error.
View 1 Replies
Dec 15, 2009
I have VB6 Dll which I am referencing in vb.net ,I am calling the following function in it. It working fine in developemnt environment but not in deployement environment.
Error Method not found: 'Boolean MyUtils._MyUtils.LoadMyObjectRecords(ADODB.Stream ByRef, System.Array ByRef)'.
View 4 Replies
Jun 28, 2010
I am in the process of converting vb6 assemblies to VB.NET.I am trying to overcome a particular design challenge.I have a vb6 EXE sitting on a Terminal Server which is shared between multiple customers.Each customer has customizations in the form of overrides to this EXE in custom business logic contained within DLL's.We know what DLL to look at based on a setting in the database.We use the CreateObject ("CustomerDLLName.CustomerClass") method to create late bound objects.If the object is "not nothing", we check for override code.For example, if my base EXE has a sub called PrintForm, based on the logged in user I may use the base sub within the executable, or I may need to use the sub in a custom DLL:
Dim oCustom as Object<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Dim strSetting as String<o:p></o:p>
strSetting = "Customer1DLL.Class1"[code].....
I am struggling to come up with a comparable if not better way to do the same thing in .NET. I want to continue sharing the base EXE so I can't just have separate EXE's and DLL's in separate folders.They all need to live in the same c:/Program Files/[Application Name] root directory so I can take advantage of the Terminal Server's shared application memory.
View 2 Replies
May 31, 2012
I created a project in vb.net and I'm able to connect to an Mssql server remotely using the host machine name. However, I can't connect using the IP Address. This is my connection String.
Server=HostIpAddress;Database=Mydatabase;uid='UserID';password='MyPassword'
View 1 Replies
Jun 2, 2010
I want to request a page(file) of information from a web server using VB code running on a PC. What is a simple piece of code which does this and/or the libraries/calls I need to use.
View 2 Replies
Sep 14, 2009
I want to retrieve Mac Address of server from the client system
View 1 Replies
Aug 21, 2009
I am trying to access VB.Net exe on a client system through LAN.Its working fine for server with static IP address.In case I try to access it with server having dynamic IP address, It doesn't provide access(config file containing server name).
In Order to access that exe with dynamic IP I need to specify current IP address of server in config file.
How it's possible to access that with server name as it's not feasible to change IP address in config file on daily basis
View 1 Replies
Feb 10, 2010
i need to know what will it take for me to access, insert, update and delete data to a database on a remote SQL Server. I already made some configurations to the SQL Server 2005 that I want to access by following the steps coming from this link -> [URL]. But somehow I am still getting an error. My primary concern is "What connection string should I use on my client VB.NET application to connect to the remote SQL Server?" Since I will be connecting to the SQL Server via Internet and not by LAN, I am wondering which IP Address and Port am i going to put on the 'connection string'? How can i get my 'TRUE' Ip address? Or is there any other way to go through with this? It will be very helpful if you could share your insights and knowledge. Here's my sample connection string:
[Code]...
View 6 Replies
Jul 22, 2010
I am using this code to get a XML file from a http or https server:
Public Function GetPageAsXML(ByVal address As String) As XmlDocument 'String
Try
Dim doc As XmlDocument
[Code].....
View 3 Replies
Nov 9, 2010
I'm allowing users to manage a distribution list stored in a database. Users are only allowed to enter emails that are @mydomain.com. A web based application then takes the distribution list and sends emails. I'd like to validate that the email is valid before sending an email from the application.
To send an email I'm using this code:
Dim SendTo As String = "ThisIsNotARealEmailAddress@mydomain.com"
Dim SentFrom As String = "me@mydomain.com"
Dim MessageBody As String = "blah blah blah"
[Code]....
Is there anyway to validate the email when the email address is added to the database, instead of a try catch block when sending the email?
View 1 Replies
May 11, 2009
I have just tried to publish a program on CD using the ClickOnce method.Everything worked well until I tried to install it on my Laptop.The program installed and ran OK on my desktop (where I created the program) and I copied the files to CD. There were two files;The program name of type Application Manifest (.application) and the Setup file (.exe).I went through all the procedure as dictated in the help file including the part that said "Closer Look: Including Prerequisites With Your Program" but nothing I tried seem to work. It appears as if I need to download further files??
View 4 Replies
May 14, 2009
My problem with distributing a program on CD has not as yet been resolved.
It does appear as if the problem is related to the .NET file as the error messages I get state the file cannot be found.
how and where I can get it and what I do with it when I've got it?
View 10 Replies
Aug 3, 2011
I made a program has wmp I distrubuted it but it didn't work in any other computer but mine what should I do?
View 14 Replies
Mar 17, 2009
I whould like to find the IP address of a game server that sends UDP packets to my PC. Of this server I know the fixed Port number, but not the IP address
I can read the netstat -anp udp data and store them in a text file... but this command don't displais the IP Address and the Port number of the external servers, only lots of asterisks
the question is: how to retrieve this IP address?
View 2 Replies
Oct 7, 2011
I'm in the midst of developing a class library DLL for a third party application. On my machine, the developers machine, things are going along smoothly. I can compile/build and my DLL is loaded, and thus works as expected.
I've been copying the contents of the Release directory from C:Solutions...Release to C:ProgramDirectory. I realize now that my DLL is loaded into memory from the Release folder, and not the folder I copied it to.The point being of course, I want to distribute this third-party add-in to my users. And sure enough when I try that, presumably the DLL isn't loaded into memory and thus not available to the user, like it is on my machine.
I tried the first obvious thing and registering the DLL on the user's machine, but that failed."The module "..." was loaded but the entry-point DLLRegisterServer was not found." It's apparent I am missing some key step or caveat when it comes to developing this class library.
View 15 Replies
Nov 18, 2010
VB2005: So I created an app that connects to an Oracle 9.2.0.1 using the .net oracle adapter. I can issue queries and process the results. This all works fine on my development machine but now that i have distributed the app to my group I find that it bombs on certain workstations, specifically when it comes to connecting to the Oracle db. I've done a little bit of research but havent come up with anything definitive.
So what should I install on my users desktops to make sure that the connection works?
View 7 Replies
Aug 29, 2009
I'm trying to send my program (a very small program) to a friend by email, but the two methods I've tried are both causing errors at his end. I've tried the two methods described in the helps files - firstly, just finding the exe in it's folder, compressing and sending it by email. That worked for the first few files but now it no longer works. Secondly I've tried publishing the file using the build option to a DVD/CD (i.e file). The file works fine to install the program on my own machine, but when I send it to my friend (compressed again) he gets errors.
View 28 Replies
Aug 15, 2011
Imports System.Net
Imports System.Net.Mail
Public Class Form1
Sub sendMail()
Try
Dim AnEmailMessage As New MailMessage
[Code]...
I use this code to send an email through gmail account but the thing I want to do is, I want to check whether the given email and password exists or not and if it exists then pop out a text box with the body of the mail and type the text and then send it as a mail. But in the above code you have to log in and type body and when you send the mail , It verifies for the email and password while sending and if anything goes wrong says there is no such gmail account.but i want to check it whether the email and password exists or not, when the user enters the email and password at the beginning itself.So that he enters the right email to log on to compose a mail.Is there any way to check whether the given email and password is correct at the beginning only ?
View 1 Replies
Apr 11, 2012
On Windows 7, VB.NET Express, I have developed a simple Forms application. I don't really make use of any external plugins or anything - it just has a couple buttons, pictureboxes, GDI operations to modify some images.And now it is complete. And I would like to already upload it. But, since this is actually the first time I try to submit something, what other details should I keep in mind when distributing my application? I mean stuff like... will my application work as expected in other machines? Other Windows versions? I am not in a proper position to test it in other machines, I fear, so I am relying the "default" settings and hoping it will simply work.
View 1 Replies
Mar 1, 2011
I am using VB .NET 2003. I have created a user defined Class Library and created a reference to it in my application. Is there a way I can compile the application so that the Class Library DLL is embedded into the application? I would really like to be able to distribute the application without having to distribute the DLL as a second a file.
In other words, I made a New Class Library lets say called TEST. I developed a new class within this library called MYCLASS. I built the Library TEST and created TEST.DLL. I then made a new visual basic project called APP1. I added a reference to TEST.DLL. I now can use TEST.MYCLASS within my APP1 project. The application APP1.EXE will run in the test environment, but if I move it to the runtime environment it will give me an error "File or assembly name TEST or one of its dependencies was not found". To correct this error I can place TEST.DLL in the directory where APP1.EXE resides. I would prefer not to have to put TEST.DLL in the directory. Can I easily compile it into APP1?
View 15 Replies
Feb 19, 2009
I came in recently with VB.NET and have created some very simple programs e.g. specific calculations that I would like to share with some people (for free), because they have found them useful. I am not to sure with the law on this. Is it legal to distribute my own work and how will I identify it as my own because some wiseguy could claim it's his own and I won't be able to prove it.
View 2 Replies
