[2008] Connect To MySql.Data.dll Read / Write?

Jan 8, 2009

I have a .dll file ( MySql.Data.dll ) that I'd like to be able to open, view and possibly edit the database but I can't find any examples or documentation on doing so.

[Code]...

View 6 Replies


ADVERTISEMENT

[2008] MySQL Connections Read/Write?

Jan 13, 2009

I have written tons of websites with PHP and MySQL, now I want to combine a website with a program on the computer.I have searched google, but I cannot find a good tutorial on how to use MySQL on a server with Visual Basic.NET I need to connect to my MySQL database, read data, and write data.

View 6 Replies

Combo Box Read Write MySQL?

Feb 25, 2009

for starters not sure if this is the right place for the post considering that it includes MySQL and VB, its here.I'm trying to load data from one table into a combo box as the data you can select, this i have been able to do "tbl_Wind" using "WindDirID" and "WindDir"

also, I am trying to select (if it exists) a value from "tbl_date" "WindDirID" to select a value from the existing data in the combo box loaded from "tbl_wind"and finally, I want to be able to change the value in the "tbl_Date" depending on if a value is selected in the combo box.when a new record is created in tbl_date it uses default values, so there is always something in the field.below is about how far i got, and its the only part that works (extracted and edited of course to exclude the other queries)

[Code]...

View 3 Replies

Read Information From Mysql Server And Write All On Table Name Links To A File?

Aug 5, 2010

How do i read information from a mysql server and write all info on table name links to a file?

View 3 Replies

Connect Mysql To 2008?

Jun 5, 2011

How to connect mysql to visual basic 2008?

View 2 Replies

VS 2008 : Connect To Remote MySQL?

Aug 17, 2010

My remote MYSQL allows remote connections so I should be able to connect to it via a VB code.

View 12 Replies

[2008] Connect To MySQL Without Any AdoDB?

Jan 31, 2009

I want connect to MySQL without any AdoDB and those things.I want make program where must to be logged in before it opens.

View 6 Replies

VS 2008 : Connect To A MySQL Database On A Server?

May 4, 2010

I have a database in MySQL server called MD

Server: Local host
User: root
Pass: wccmd12
port 3306

How do I connect to this database in vb.net?

View 2 Replies

VS 2008 Connect To A MySQL Database On The Website?

Sep 21, 2009

I want to connect to an MySQL database on the website, I want to write and retrieve information from that database into a table on my program.

Can anybody link me to a tutorial on how to do this? Or give me some insight, I'm relatively new to Visual Basic (7 months) and I'm not exactly sure on how to do this.

View 1 Replies

VS 2008 Remotely Connect To Mysql Server?

Sep 9, 2010

from vb.net code i try to remotely connect to mysql server :

Dim conn As New MySqlConnection
Dim comand As New MySqlCommand
Dim myconnstring As String = "server=192.168.1.100" _

[Code]....

I get Timeout I/O operation. With mysql front i can connect without problem.I closed windows firewall.

View 1 Replies

Can Visual Studio Express 2008 Connect To MySQL

Apr 8, 2011

I've installed MySQL .NET connector but it's not shown in data source options to connect in Visual Studio Express Edition.

View 2 Replies

VS 2008 Error - Unable To Connect To Any Of The Specified MySQL Hosts

Nov 16, 2009

I create an application in VB.net which connects to MySQL, deployed it to 10 computers. 8 of them worked perfectly, 2 of them gave me the error:Unable to connect to any of the specified MySQL hosts.What was different with those 2 computers? Is there any setting I need to do on the MySQL server itself? Anything I need to change/update on those two computers?

View 4 Replies

[2008] Connect To A Remote Database Using The MySQL Connector

Apr 6, 2010

So, what I'm trying to do is to connect to a remote database using the MySQL connector. Dim c As New MySqlConnection c.ConnectionString = "Server=" & URL & ";Database=" & "" & ";Uid=root" & ";password =" & "" c.Open()I know the connection string is correct. I can access the phpMyAdmin through a web-browser just fine. For some reason however trying to open the connection throws an exception 'Unable to connect to any of the specified MySQL hosts'. I tried disabling the VS debugging process, as I thought maybe it's blocking my MySQL access for some reason, but no.

[Code]...

View 5 Replies

VS 2010 - MySQL Connector As A Resource On My Application - Connect To My MySQL Server

Jun 21, 2012

What i have going on, is i have a MySQL connector as a resource on my application, and im basically trying to connect to my MySQL server, to either a) register a new account, or b) check that the account exists and they are premium, and login, Now what i have run into problems with is: My MySQL Database Name has a _ in it which VB is not allowing for some strange reason.

The code i am using is below

Imports MySql.Data.MySqlClient

Public Class Form1

Function UpdateRecord(ByVal query As String) As Integer

[CODE]...

How i can allow the _ into the application, because the only databases that don't have a _ in the user or dbname are a) Paid ones which i DO NOT have the money for or self hosted ones, i cannot leave my computer on 24/7

View 3 Replies

Make A Login System Mysql Try To Connect To A Mysql Database?

May 3, 2010

I am trying to make a login system mysql try to connect to a mysql database.

Here is my code:

Imports MySql.Data.MySqlClient
Public Class LoginForm1
Dim MySqlConnection As MySqlConnection
Private Sub OK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OK.Click
MySqlConnection = New MySqlConnection()

[code]....

View 6 Replies

Application Can't Connect To Local MySQL But Can Connect From Command

Sep 30, 2011

We have a VB.Net application which works fine in our tests in different Windows XP SP3 machines. However there is one machine in which is displaying this error:

Unable to connect to any of the specified MySQL hosts

Using the mysql command, we can successfully connect to the database. We already checked for any other application or firewall that could be blocking the connection but it seems fine. We also reinstalled the system (no errors during the installation) but the MySQL error message doesn't change.

The system settings are exactly the same as in the other computers. We are using "localhost" as server in the connection string. The "hosts" file has its default values (nothing strange in there).

View 1 Replies

DB/Reporting :: Connect To MySQL With MySQL Connector 6.1

Nov 16, 2009

Im building an app to manage PSP contents, and it should connect to my MySQL server on my domain to refresh game info and ratings and so on, but I cant make it connect with MySQL Connector 6.1.

[Code]...

View 2 Replies

Mysql Database Connect With Mysql-connector-net

Jan 30, 2011

I can have mysql database. but i have not mysql. how to connect this database vb.net 2005. but i have mysql-connector-net . I want to mysql-connector-net use to connect this database. database path(C:Documents and SettingsAdminMy DocumentsVB.NETStock delnaSTC.sql)

View 3 Replies

Can't Connect To MySQL - Unable To Connect To Any Of The Specified Hosts

May 29, 2012

I am trying to connect to my remote MySql Database within Visual Studio using the compact framework.

I can successfully add a data source and preview the data within the IDE so assume that the connection is ok regarding Connection strings and remote access.

However, when I attempt to access the data using any run time control I get the following error when the table is loaded using the .fill method.

MySql.Data.MySqlClient.MySqlException was unhandled
ErrorCode=-2147467259
Message="Unable to connect to any of the specified MySQL hosts."

[Code]....

View 9 Replies

Read/write Some Data ?

Feb 13, 2012

My first question has to do with the opening lines needed in a VB program in order to connect to Excel 2007 and read/write some data from/to it. I know the process only slightly and reading and writing to the cells is not my real concern for the moment. What I need to become familliar with are the lines like this:

CODE:

This is just one of the examples I have read through and to be honest I only follow this slightly. The trouble was that with each new article I read, people did this differently, not the variables on the left mind you, just that some left out lines, which I can see could be done based on circumstances. Still others said the Imports line was not needed....etc...and other loaded up at least 3 or four more Imports lines insisting all were needed.

I'm looking for some straight-forward advice on what is the minimum needed to access an existing Excel spreadhseet and to just read some of it's cells to variables in the code and then writed some data back to certain cells within the spreadsheet and then save and close it.

Also, please note that I am using VB 2010 Express. Why, because I'm a broke developer who spent most of last year out of work. I have a new contract assignment which is so far going well but will go even better if I can master this technique with VB.NET, not VBA. And all the docs I've read said that even though VB 2010 Express is a watered down version of VS, I should be able to do medium level tasks such as this with it.

View 1 Replies

How To Write And Read Data From Xml File

Jan 18, 2011

How Can I load data into my datagrideview from xml file

View 8 Replies

Read/write Data From Another Class?

Jan 28, 2012

My assignement is to create a simplistic checkbook organizer. The GUI is built, and the form is needing to call to a transactional class i have created. My problem is I dont know the right commands or syntax. I though I had it, but i'm getting an error.

Error: "Arguement not specified for parameter 'PreviousBalance' of 'Public Sub New (PreviousBalance as Double)'.

Here is my code so far for the form:

Private Sub btnAddTransaction_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddTransaction.Click
'declare user input variables in this GroupBox2
Dim TransactionAmount As Double

[code]....

View 1 Replies

Read / Write Data From RS232 Port?

Aug 23, 2010

I need to write and read data from a RS232 port. On the RS232 port there is a RFID Card reader-Writer connected. So I need to send hex codes to the device, and have to poll every 1sec if there is a card in the system. If there is a card I need to read the info that is on the card. My biggest problem is I think is that I am not sure how many characters there will be in return after the read command (maybe it is always the same length this I am not sure). What is the right way to read-write to the com port. So I always got the same result and not skipping a code.

View 12 Replies

Read Data From Sql Server And Write In .csv File?

Jul 30, 2009

how i read data from Sql server and write that in .csv file with vb.net , after that saving the .csv file with my own name and path? what must i do? for information data in sql like this one:

[Code]....

View 9 Replies

Write A Code To Read Data From .gpx File?

Jul 5, 2011

I would like to write a code to read data from .gpx file, but I get stucked with classes: I have a problem with creating working array of objects in object and setting or getting data from it.

I wrote this:

Module Module1
Sub Main()
Dim i As Integer

[code]....

but I get always the latest values of points for all slots of array... Lets say we got 3 points as an input: 1. lon: 5, lat: 1; 2. lon: 2, lat: 3; 3. lon: 4, lat:9. I always get the same values for i = 0 to 2... lon: 4, lat: 9.

View 6 Replies

Write A Program To Read Data From Txt Format?

Apr 9, 2010

$GPRMC,115432,A,2218.3118,N,11410.8105,E,0.0,204.9,050209,2.0,W,A*01
$GPRMB,A,,,,,,,,,,,,V,A*1C
$GPGGA,115432,2218.3118,N,11410.8105,E,1,12,2.0,18.4,M,-2.1,M,,*6B
$GPGSA,A,3,05,09,12,14,15,18,21,22,24,30,31,47,3.5,2.0,2.9*3D

[Code]...

give me a hand on read data from TXT format file, and how to read selected data only (RED) at $GPRMC

View 8 Replies

Write And Read Class Data To And From A File?

May 3, 2009

What is the best way to write & read some customised class data to and from a file as a way of saving my application settings?

View 2 Replies

Read Data From A Database Table And Write It To A Txt File?

Mar 31, 2009

what I am trying to do is i have a table with four records and I want to write it to a txt file. I am running sql server 2000.I am able to connect to my database and I am able to right data to a txt file my only problem is it always returns the 1st row of data.

Dim FILE_NAME As String = "C: emp est2.txt"
Dim conn As New SqlClient.SqlConnection
Dim da As New SqlClient.SqlDataAdapter

[code]....

View 5 Replies

Read From CSV File, Write Directly To Data Source

Sep 7, 2011

I'm trying to "convert" an Access DB to a stand alone application. I have under estimated the differences between VBA and VB. Although I have many questions, I'll focus on this topic first.

The Access DB collects and maintains SNMP traps from a radio station. I import CSV files from a remote Unix server via FTP, parse the text line-by-line, and add to a table as a new record. So far, I can parse the text and add to a dataset but I want to write directly to the data source. I also need error handling that will trap errors for duplicate records. There is a Reconcile function that ensures that all lines in the CSV files are added to the table before the files are permanently deleted. Here's what I have so far:

Public Class clsRnm
Private msTrapTable As String
Private moTrap As clsRnmTrap

[Code].....

View 1 Replies

Write Code That Will Control And Read Data From Applications?

Mar 22, 2010

I'm having difficulty figuring out how to run different programs with my VB program. Using Excel and other MS office programs is easy enough since I just add in the relevant COMs, but I can't for the life of me find out how to run other programs. I promise I spent many hours searching before bothering you kind folks here! I'd think this is a common issue so maybe I haven't been searching for the right thing.how to write code that will control and read data from applications.I know you can do "Process.Start" to open any application, and it looks like there are ways to determine the controls available on an open application, but I can't figure out how to do it. Is this possible? Or do I have to import a .dll file for every program I want to control? Or are both possible?

View 12 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved