In a text file I have users add a folder using the folderbrowserdialog users then push add which appends the text with lets say they selected downloads
Downloadsname=Downloads
downloadspath=C:documents and settingsJamesDesktop
how can I make it so that when they push a button it seraches for downloadsname then after the = is the text to use as a string and do the same with downloadspath
Well I basically know how to read a text file, replace text then write to one. how to append text after a specified string (ie, insert text at a specified line, removing the text after a string in a line and changing it without altering other lines, etc). Can someone please tell me how I would go about adding a string after a certain string in a text file? For example:
I Have:
test
example
hello
[Code]....
i have a string array that i want to output to a text file. the array size is 10000. i fill the array starting from 0 with some strings. at the end, i only want to show the array from index 256 to the last array that is not empty (for eg. if the array is filled with data from 0 to 2000, i only want the text file to show the data from 256 to 2000 and ignore the remaining strings). Is there any function to do this?t i use is shown below
Dim myArray(10000) as string
Dim strArray As New System.IO.StreamWriter("c:List.txt")
strArray.WriteLine("{0,10}{1,30}", "Index", "Symbol")
[code].....
I'm trying to make a program that can export my schedule into a CSV file to upload on to google calender.I need to extract some text within a textbox control. I'll show you an example.This is the text in the textbox:
Quote:
Monday, 10 January, 2011
09:45 - 18:00
Phone Work09:45 - 12:15
[code]....
I need to get just the date and times from this list, and put them in variables. so that I'll end up with:
1) A string with a value as a date, which would be "10 January, 2011" for example: strDate1 would have the value of "10 January, 2011"
2) A start time, for example: strStartTime1 would have the value of 9:45
3) An end time, for example strEndTime1 would have the value of 18:00
I have a binary file. If I look at it with a hex editor, the first values are:208, 207, 17, 224, 161, 177, 26, 225, 0, 0, 0, ... etc.It has a length of 330240 bytes I have tried to open it and read it into a string so I can manipulate it and write it back. No matter what I use, I either don't get the correct number of bytes or the values in the string are incorrect. The most common error results in the first values being: 63, 63, 17, 63, 63, 26, 0, 0, 0 .... etc.It is interesting that it appears that any value > 63 becomes 63.
I get the 2nd values by a simple loop:
For lnx = 0 To 99
Debug.Write(Asc(line.Substring(lnx, 1)))
Next
I have tried a whole number of ways to read in the file, including filestream, My.Computer.FileSystem.ReadAllText, File.io.readAllLines, etc.All either give me a string length of about 324000 (not sure why) or, if they do, don't have the correct values. Yes, I have tried various encoding options.
I need to find a string (sort of like: "D" & Chr(0) + "L" & Chr(0) + "S" & Chr(0)... ) so I can then replace that portion of the string with a new value, then write out the file.I use the ".indexOf" to find the data in the string.Why can't I load the file into a string? Or, do you know of an easy way to find some text (similar to above) in a file and then replace the next x number of bytes with a new value and close the file?
G:DevelopmentDOT NET DevColony_4ImagesBattenhallAve_Plan.bmpand i want to find and return the value after the last '' for example in the string above i would want to return:BattenhallAve_Plan.bmp
View 5 RepliesI am needing to locate a given set of numbers in a string, and have limited success, it is almost always finding the numbers that I want, but I need it to be more reliable.Below is a test program that I am using to test with and also 2 picures that may explain better that I can put into words.
[Code]...
I have a string. I need to check what characters it contains because certain invalid characters are causing my sql query not to work. In the query I select where SupplierName is equal to the string. I need to replace the invalid characters at database and vb level. But I need to know first what the characters are.
View 15 RepliesI am trying to find the position in a string of a perticular letter of the alphabet (Q), I have found a method to determine if the letter exsists in the string, but not it's position.
View 21 RepliesI am not an ardent developer in vb.net programming. But off late I am using vb.net to develop a windows application.
The following is what I am trying to do:
I am reading an excel file and storing the string value present in each cell, and trying to match the string in a word file.
The program works fine except that I am having problems in returning the page numbers of the matched string.
The page number value is always returned as one.
The following is a piece of what I had written:
If FindStringInFile(wordfilename, vValues) Then
currentPageNumber = word.ActiveDocument.ActiveWindow.Selection.Range.Information(Microsoft.Office.Interop.Word.WdInformation.wdActiveEndAdjustedPageNumber)
TextBox3.Text = currentPageNumber
End If
wordfilename is my word file and vValues is my excel string data
i can parse html source code and regex a few things, but i know the exact phrase i'm looking for do i still need a regex if i know what i'm looking for?
if (string = logged) then
do the code if 'logged' is found in the html source
else
[code]....
I've been writing a socket application in which the client sends a user/pass combination which the server compares to a local text file. I'm only hacvin a problem with a small section where I have a do loop which does this comparison:(the string 'fromclient' has been defined earlier, as the information was received from the client)
fromfile As String
Dim sr As StreamReader = File.OpenText("C:PASS.txt")
Do While sr.Peek <> -1
[code]....
All I am doing is reading each txt file I find in a directory and finding certain strings in the text then counting how many I find in each file and then once each file has its separate counts it send it to a sql database. I have most of it done, but I cant seem to get the count to separate each file so my problem now is that it counts the first file but when it counts the next file it adds to the first file and so on through all the files
Imports System
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
[Code] .....
I'm trying to figure out the mouse position on the form, how do I do that?
View 2 RepliesIs there anyway I could find text in a RichTextBox? I want to put the code in here
[code]...
Title says it all, I want to put a .txt files TEXT into a Dimmed String. How?Dim TempStorage As String
TempStorage = FilePath.Text.ReadAllText Something like that?
I need to find certain text in a text file or text box and copy next line. How can I do it?
View 6 RepliesI have to find a string in a huge text file ( ~ 50MB) and then replace it.Since it's quite huge I tend to open the file and then read line by line, and then replace the necessary line(s) (rather than "readall" the file of course).My question is how to replace the whole line?Let's say I found the line that should be replaced . I know I can create a copy file and copy all lines into there ... but I'd prefer to replace the line in the original file rather than creating a copy instance.
View 5 Replieshaving problems with my code it is showing wrong values on the shortest , longest and average sentence the values are not corresponding with my sentences.I need help this my code:
[Code]...
How can I write and read a string array to a text file?
View 2 Repliesine from a text file. This is for an ASP.net Webpage. I will have a file called ources.txt. Example data of this file looks like this:
View 3 RepliesHow do I read all the text from a text file and save it as a string variable? For some reason I remembered it being something like this: IO.FromFile.ReadAllText("path") but thats not it.
View 3 RepliesWell I've recently discovered that trying to create a file with so-called 'illegal characters' will cause your application to crash.. How do I find these characters in a string and replace them with nothing?
The invalid characters are / : * ? " < > | if that helps.
What would be the fasted method of get a string list of all values within [] in a string of text? For example: [client_name], are you are doing today? My name is [my_name]. The list of strings would be:
[Code]...
I've got an issue with a program I am writing. The specific issue is replacing characters in a parent string by finding, and matching, specific characters within it that are parsed from an external xml file. It's for a chat-like client.Here's the 2 classes I am using to pull the emote strings, titles, and id from external XML:
Imports System.Text.RegularExpressions
Imports System.Xml.Serialization
Public Class emote
[code].....
Private Sub txtname_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtname.TextChanged
myConnection.Open()
[CODE]...
I want to four digit code like Abneesh than first query finding max of A and second string take string A than code generate like A001----------A999
I have one combobox, two buttons (Add and View) and listbox. When I click button Add text from combobox is added to text file. This is code for Add button:
[Code]...
i have a string array that i want to output to a text file. the array size is 10000. i fill the array starting from 0 with some strings. at the end, i only want to show the array from index 256 to the last array that is not empty (for eg. if the array is filled with data from 0 to 2000, i only want the text file to show the data from 256 to 2000 and ignore the remaining strings). Is there any function to do this? i am using visual basic express 2008. The code that i use is shown below
[Code]...
I have a somewhat unique problem that I have looked for an answer to and continually hit brick walls. The problem is this. I'm using vb.net to read a byte array from memory which total 32768 in length, which is converted to a string. The memory is the active console chunk in the game Call of Duty 4.
[Code]...
These is the content of my txt file which is saved in D drive in my pc abc,1,2,3..I tried the flowing but it didn't work:[code]I am getting error on this line.. data = line.Split(","c)...it says this line isn't in use anymore or something and that I rather use LineInput but thats asks for filenumber and i don't know what that is. I am sorry but I am a complete beginner. what else can I try? [code]ok that error is gone now but now if I want to add these values to a list box..how can i do that?
View 1 Replies