.net - Make The Application For The Project (.wip) Is Installed"?
Apr 28, 2012
I have a very old plug-in software developed in Visual Basic quite years ago, now its getting time to modify the copyright info. At this point, the issue is now that I was not the author so I don't know anything about it.
I have updated the source files which includes a SLN, VBP, WIP, MSI and so on, then I tried to use VS2008 to open the SLN file and after Conversion it given me a message "The project for XXX.wip is not installed, please make sure the application for the project (.wip) is installed", Apparently this is not right version to get going on. Can everybody tell which VS version can proceed it? or any idea how I do this?
View 2 Replies
ADVERTISEMENT
Feb 23, 2009
i developed one vb.net project. can i make this exe to be installed a total of two times (once on two different computers).
View 2 Replies
Jun 12, 2009
How do I fix this error in Visual Studio? "The project file cannot be loaded. The application for project ... is not installed" I have copied a whole project onto my PC, both into My Documents/Visual Studio and into inetpub/wwwroot, but when I try to open the project in Visual Studio, it tries to open just 1 file .vssproj and gives me error messages, like : "The project file cannot be loaded. The application for project ... is not installed.". What am I doing wrong? The VS edition is 2005 as are all the projects aI am trying to load.
View 3 Replies
Apr 22, 2010
Is it possible to make that an application doesn't have to be installed so it would be portable?
View 5 Replies
Nov 14, 2005
I installed VS 2005 Beta 2 on a WinXP pro system (numerous times). It finally installed without erreors. It looks like it is basically working - I can create a new windows project and add items from the toolbox, edit the code etc. If I open an existing project (created on another box) things load properly but I cannot open any forms in designer view (I can open them in code view). When I attempt to open a form in design view I get the following error popup:=====================There is no editor available for 'c:....myForm.vb'.Make sure the application for the file type (.vb) is installed.
View 12 Replies
Jan 6, 2011
I am running VS 2010 Professional and have a solution with 3 VB projects in it. I can open the forms in 2 of the projects just fine but if I try to open any of the forms in the 3rd project I get a message saying "There is no editor available for .....Form1.vb. Make sure the application for file type (.vb) is installed". Everything was working fine last month and I could open any of the forms.
Again the problem is limited to just the 1 project in the solution.
View 3 Replies
Aug 7, 2009
My Visual Studio 2008 seems to be corrupted. I can not use the Windows Forms designer. I get an error about: "Make sure the application for the file type (.vb) is installed." Also, under menu item Tools>Options, it says "an error occurred loading this property page" when I try to look at the options for 'Data UI Customization' under 'Windows Forms Designer'
[Code]....
View 2 Replies
Feb 16, 2012
I'm using VS 2010, and I did a project using VB and a database in Access. The problem is that when I try to put that "application" on other computers, sometimes, is not working. I thought it can be because on these computers they don't have access, but on one computer, is running another app which is using Access and there is no Access installed. How can I check if my application requires Access to be installed or not?
Here is a example of how I did the connection:
Public AccessOLEDBConnString= "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & myfullpath & ";Jet OLEDB:Database Password=password"
Function getConnection() As OleDb.OleDbConnection
[CODE]...
And when I want to have access at the data I'm doing like this:
dim conn as Oledb.OledbConnection
dim sql as string
dim ds as Dataset
[CODE]...
View 9 Replies
Jan 30, 2012
I just upgraded from Windows XP Professional to Windows 7 Ultimate. Now I have a program in which I am receiving the following error:"There is no editor available for C:...Form1.vb. Make sure the application type (.vb) is installed."
This occurs when I try to open the designer view of the form.This problem does not exist in new programs (ones created after the upgrade).I am at a loss to explain this.
View 3 Replies
May 29, 2011
I followed the Quartz manual to the dot and still I'm not sure why it isn't picking up the GetDeal.vb (Quartz job) in Global.asax. It never went into the _scheduler.JobGroupNames and _scheduler.TriggerGroupNames loop as follows:
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim factory As ISchedulerFactory = New StdSchedulerFactory()
_scheduler = factory.GetScheduler()
_scheduler.Start()
[CODE]...
I've attached a link to download my Project here. how to make it work?- [URL]
View 1 Replies
Dec 8, 2011
I would like to find out how I can make a complete copy of an existing project.The purpose of this is not for backup but rather to be able to resue some of what I already designed/coded in VB and turn it into a new or different application.
View 5 Replies
Nov 5, 2011
How to make a setup file of VB project application
View 1 Replies
Aug 13, 2009
I'm making a application but I want it to be as small as possible also if you use the FormWhatever.Show function, if you close the parent window, everything closes. Is there a way to make a button open up an application that is NOT in the current project?
View 5 Replies
Oct 31, 2009
I have a project in vb.net2008. I use tools of vb6 and excel in it. Now I want to publish my project and use it in other computer that not installed vb6, vb.net2008 and excel programs. What must I do?
View 1 Replies
Jul 16, 2010
I have created an shareware application using vb.net visual studio 2008 for windows desktop, and packaged it using innosetup 5.3.8. The problem is when i have installed the application in C:Program FilesApplication and it runs successfully(use trial period of the application), Im also able to install the application once again freshly with the same setup by installing in different directory.eg C:Program FilesApplication new . The application in C:Program FilesApplication new does not have any settings of the already installed one.
Where do i went wrong . Do i need to take care of this in my application(vb.net) or innosetup. How to take care of the already installed path in innosetup or carry the settings of already installed application to newly installed path by upgrading the older one.
I dont want to write any thing in registry because the application does not want any administrative permission requirements.If i install the application in same path it gets updated with the older settings being taken over to this new one and it works fine.
View 1 Replies
Jun 8, 2011
I have designed and published my small created app with WINDOWS FORMS using VB 2010 EXP on Windows 7. I can only install the app on the machine that I used to develop the app.I want to install the app on another computer but I cannot. I usually have error reports.
Example:Unable to install or run this application. This application requires Microsoft Common Language Runtime 4.0.3 to be installed on your computer.
what can I do to be able to install the app on a different computer which does not have .Net and does not have visual basic 2010 installed.
View 13 Replies
May 24, 2009
I need to create a setup project, the main project can't be installed without a program called infragistic.
How can I do ask for infragistic program before to install the main project? If infragistic is not installed, the setup project must install it, I mean execute the infragistic installer before the main installer.
View 7 Replies
Aug 31, 2009
I have a simple windows Service developed in VS.net 2008 and VB.net. When I install the service using Installutil.exe from the command prompt it is working like a charm.
When I try to add a setup project and set the output and build and install it though it says successfully installed, it is not showing up in the services.
The event log shows that it is successfully installed. I just did check the registry, it did place the assemblies in HKEY_CURRENT_USERSoftwareMicrosoftinstallerassemblies.
But I don't understand why it is not showing up in the services listing. I refreshed and restarted.
View 3 Replies
Jan 9, 2012
I have recently created an application with Visual Basic.NET. I published my application and installed it. Now the question is that I need to know where exactly does the application gets installed on my system ?
View 6 Replies
Jun 29, 2010
If you mark your application using "Make Single Instance Application" option in the application settings tab and run your application under a GUEST account or a restricted limited/standard account the application throws UnAuthorizedAccessException or CantStartSingleInstanceException.
Take the following steps to reproduce this behavior.
1) Create Windows Form application.
2) Enable the "Make Single Instance Application" in the project properties.
3) Log onto a GUEST account and open the application twice to simulate StartUpNextInstance.
We need developers to reproduce this behavior and post any valuable input if you experience these symptoms.
When posting information please include the following:
a) The operating system version + service pack.
b) The .NET framework version used.
c) Verify this symptom is present when running under GUEST account.
To workaround this issue turn off the "Make Single Instance Application" option ad create a Local named mutex in the StartUp() event.
[Code]...
View 8 Replies
Jun 20, 2009
I made an client server application in vb.net and it is alredy installed among various clients.The problem is i found a potential bug in ma application, so i want to make patch for ma apps(Like a update files that can be downloaded
View 1 Replies
Apr 9, 2010
i published an application in vb.net. the user will be able to install the application anywhere they choose on the computer (or perhaps not anywhere they choose but where ever the default location is). how can i programmatically get the location where the user installed the application? another words i need the application to know where it is running from. how do i detect that?
View 6 Replies
Mar 8, 2012
how i can use an not-installed font in my vb application?
View 5 Replies
Nov 9, 2011
is it possible to make my vbproject can installed in Mac OS or even on iPad?
View 1 Replies
Jan 30, 2010
I know the default install path of the app and the name of the .exe file, but is there a way to see if it is actually installed? I've seen suggestions for checking registry entries, but I don't know if this app uses any or if if varies for different users on different pc's.
[Code]...
View 2 Replies
Apr 23, 2010
How I can find path for installed application from VB.net if i know the name of application exe file?
View 6 Replies
Jun 15, 2009
I am trying to install a program but I get the message Application already installed at other location The application does not appear in the program manager to be uninstalled. I have tried publishing a later version but when I try to install it I get the same message. The click-once publisher generally includes an uninstall program with the applications. when Ive had this problem before it was fixed by republishing as a newer version.
View 1 Replies
Oct 15, 2009
Do I need to have MSAccess installed in order for a VB.NET application to use an .MDB?
View 10 Replies
Jun 3, 2010
i want to make a simple program where i can add/edit or delete a shortcut from an installed programs in my computer.
let say c:program filesmicrosoft officeoffice11winword.exe.
the purpose of this is i want some of my selected programs to be in a single window where i can click to open so i don't need to go to start then programs and open that specific program.
i want to run that program in startup so everytime i start my computer the shell or the program is already running and i could click the program that i want on that window.
View 2 Replies
Mar 16, 2011
I have started working on the module based application (plugin based architecture) and client want setup of module that can be run later and added automatically in main application. So, what I am thinking to apply in module setup project is to find the installation directory of main application and then paste dll of module in specific sub-directory.
Is it possible? Is there any other way to add feature in main application later using setup?
View 10 Replies