I have recently created an application with Visual Basic.NET. I published my application and installed it. Now the question is that I need to know where exactly does the application gets installed on my system ?
View 6 Replies
I have windows application in which I get currently windows logged in username using following environment property
System.Environment.UserName But when I ran application using visual studio, it works without any problem. But when I publish application & try to run it, it get System.Environment.Username value as nothing.
cause of this issue? Or any other alternative to get current system logged in username.
Getting follwoing error while installing ClickOnce VB.net application"
"the application requires that assembly System.Net Version 3.5.0.0 be installed on GAC"
Is it possible to change the application version without publishing the application? Because I'm going to make an auto updater which needs some version information to work, but I don't want to have an installer.
View 3 RepliesI have created an shareware application using vb.net visual studio 2008 for windows desktop, and packaged it using innosetup 5.3.8. The problem is when i have installed the application in C:Program FilesApplication and it runs successfully(use trial period of the application), Im also able to install the application once again freshly with the same setup by installing in different directory.eg C:Program FilesApplication new . The application in C:Program FilesApplication new does not have any settings of the already installed one.
Where do i went wrong . Do i need to take care of this in my application(vb.net) or innosetup. How to take care of the already installed path in innosetup or carry the settings of already installed application to newly installed path by upgrading the older one.
I dont want to write any thing in registry because the application does not want any administrative permission requirements.If i install the application in same path it gets updated with the older settings being taken over to this new one and it works fine.
I have designed and published my small created app with WINDOWS FORMS using VB 2010 EXP on Windows 7. I can only install the app on the machine that I used to develop the app.I want to install the app on another computer but I cannot. I usually have error reports.
Example:Unable to install or run this application. This application requires Microsoft Common Language Runtime 4.0.3 to be installed on your computer.
what can I do to be able to install the app on a different computer which does not have .Net and does not have visual basic 2010 installed.
i can publish my app fine.it creates the setup and the rest of the files, whatever they are.on my operating system, the setup runs fine.when trying to install it on another system, it asks for the microsoft 3.5.net.this update can take quite a while.how can i publish my app, in such a way that it can run from the files in the setup and not have to have any other addons, as .net framework. i know it's possible, since i was able to install other software before i had the .net framework.
View 19 Repliesi just finished an application it works good when i debug but i tried to publish it and the publishing fails with errors that some files are double but i don't get what the problem is the error details are as follows
PLATFORM VERSION INFO
Windows : 6.1.7600.0 (Win32NT)
Common Language Runtime
: 4.0.30319.235
[code]....
Getting error 'cannot locate application' when publishing vb.net application..
View 1 RepliesI've written a really simple launcher app for my team at work to use. However I wrote it in VB.net Express 2010 so its using .NET 4. I need it to be compatible with older machines that are using .NET 2 or maybe 2.5. I don't want to force upgrading to a higher .net if its not needed. And in some cases we work on old machines that can't be upgraded. My app is really simple and I'll post the code if needed. I am still a noob, my coding is ugly, and this is a quick and dirty tool.
View 1 RepliesI'm having troubles publishing my application to use in any computer. That's because I don't know how can I publish it within the database.
View 10 RepliesI have a vb.net application that has to be published on the server to a specified path. After publishing, when I try to install the application, I get the below error msg:
ERROR SUMMARY: Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of \agbvseng14datasSOFTEasy_ECNNouveau dossierEASY ECN.application resulted in exception.
Following failure messages were detected:
+ Downloading http://bue479/EASY ECN/EASY ECN.application did not succeed.
+ Unable to connect to the remote server
+ No connection could be made because the target machine actively refused 180.30.4.18:80
what are the benefits of publishing an application versus just grabbing and using the .exe file from the build?
View 1 RepliesIn my code I've allowed used to create their own mazes and save them, under whatever name they like. I've also included a few pre-created mazes. The mazes themselves are saves in .txt files in the bin/debug folder of the project, along with a .txt file containing the maze names.
I really need to publish this program to send it to my teacher, but when I publish it it doesn't include any of the .txt files in my bin/debug folder.
I have created a windows application. Now i am ready to distribute and install the program, but I want to have the user need a password to install the program. Like a product key that I could set per individual customer. Is there a way to do this?
View 2 RepliesI have added some files that I need to be downloaded to the Application start up path. So I set Build Action as content now the files have been copied some where
C:Documents and SettingsTestUser.ANNAMLocal SettingsApps2.0DataHVDRBMY5.8AA858AT9VM.TNP est..tion_2d7cfc137d9c2c74_0001.0013_432bd4561850d290Data
How can access file from the application. My problem since it is a dynamic path will it be same folder count so that we can use like ....Data Some think like this
Using: VB 2008 Express?I created an application that connects to my MySQL, and everything works fine, but...
1. On my development computer, Windows 7, 64bit, I add the MySQL.data.dll file as a reference. I publish the program, run the setup.exe, and sucess.
2. I then copy my published folder to my test computer, Windows Vista 32 bit, and upon running the setup, the program fails to work because it cannot find the Mysql reference.
3. I then transfer my entire project over to my Vista computer, publish the program, run the setup.exe, and sucess.
4. I finally found out what was happening. My Windows 7 comptuer was not including MySql.Data.dll.deploy file in the Application Files published directory; but when I compiled it on the Vista machine this MySql.Data.dll.deploy was included.
So, in the end, I cannot compile the program on Windows 7, because it fails to create the .deploy file, and use it on Vista or XP (for some reason Win7 doesn't need this .deploy file?); but I can publish it on the Vista machine and install it fine on Windows 7, Vista, or XP. My targe CPU setting is Any computer.
I have a windows forms application written in VB.NET which scrapes information from serveral web pages (who doesn't right)? Anyway, I am having problem with one particular site where partway through the page navigation my application hangs. When I press pause (or break) in the debugger, it stops on a call to System.Windows.Forms.Application.DoEvents.
Resuming execution shows that it really is stuck on this line (it does not reach the next line of code). It also hangs about the same point each time I run it (at least its consistent). Since System.Windows.Forms.Application.DoEvents yields to other threads on the same processor and then resumes execution of the current thread, I think the problem is that some other thread is not behaving well (not returning from some event handling code). I thought Windows 7 was pre-emptive, which makes me
doubt that theory but I really don't know.
[Code]...
The program scrapes somewhere between 12 and 14 pages before it gets stuck on the call to DoEvents. Does anyone have a clue why this would happen? Why would any call to DoEvents hang?
I've made a fairly good Windows form application to solve quadratic equations, but I am having a hard time understanding the publication process microsoft uses in Visual Studio. I'd like to distribute my programm as freeware on my blog.
View 5 RepliesTrying to publish a click once type app to a local directory and create a websetup with the published contents- so that i can give tat setup to install in two different servers. but as the publishing wizard takes a URL - separate setup is required for each server. Is there any way that i can create a single setup which i can use it in two servers..?
View 1 RepliesI have a solution with two projects. The main project connects to the second project via a reference, and the reference path is local to my machine. It looks like it references the .exe file.So when I publish the main project (ClickOnce), i get the following error:
Application validation did not succeed. Unable to continue.In the log file, under Error Details, it says
System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the download assembly Project2.exe
- Source: System.Deployment
How can I include this second project? Should I publish it, then reference the published files? What do i reference? The .application file?Is there a way to just include this second project, so when I do publish the main project, the second one just goes along with it?
i published an application in vb.net. the user will be able to install the application anywhere they choose on the computer (or perhaps not anywhere they choose but where ever the default location is). how can i programmatically get the location where the user installed the application? another words i need the application to know where it is running from. how do i detect that?
View 6 Replieshow i can use an not-installed font in my vb application?
View 5 RepliesI know the default install path of the app and the name of the .exe file, but is there a way to see if it is actually installed? I've seen suggestions for checking registry entries, but I don't know if this app uses any or if if varies for different users on different pc's.
[Code]...
How I can find path for installed application from VB.net if i know the name of application exe file?
View 6 RepliesI am trying to install a program but I get the message Application already installed at other location The application does not appear in the program manager to be uninstalled. I have tried publishing a later version but when I try to install it I get the same message. The click-once publisher generally includes an uninstall program with the applications. when Ive had this problem before it was fixed by republishing as a newer version.
View 1 RepliesDo I need to have MSAccess installed in order for a VB.NET application to use an .MDB?
View 10 RepliesI have a very old plug-in software developed in Visual Basic quite years ago, now its getting time to modify the copyright info. At this point, the issue is now that I was not the author so I don't know anything about it.
I have updated the source files which includes a SLN, VBP, WIP, MSI and so on, then I tried to use VS2008 to open the SLN file and after Conversion it given me a message "The project for XXX.wip is not installed, please make sure the application for the project (.wip) is installed", Apparently this is not right version to get going on. Can everybody tell which VS version can proceed it? or any idea how I do this?
I have started working on the module based application (plugin based architecture) and client want setup of module that can be run later and added automatically in main application. So, what I am thinking to apply in module setup project is to find the installation directory of main application and then paste dll of module in specific sub-directory.
Is it possible? Is there any other way to add feature in main application later using setup?
I need to get a list of installed program on local machine with application icons. Below is the code snippet that am using to get the list of installed program and installed directory path.[code]....
View 1 Replies
