say I have a Button1 subroutine
[code]...
I have a lot of such buttons in my main form. They all do the same thing like this. get the text and pass to some other routine. If i have 20 buttons, then i will have 20 such subroutines. Is there a better (or standard way) to do this without creating that many subroutines?
In VB6 I could set up code to loop through say 10 option buttons to check their values. The code would be something likie this:[code]But in VB .NET it seems that if I use the Controls command as above I cannot use/check the Checked property as Control does not take that as a property of Control. It seems also that I may have to use the Find property of Control as in "Controls.Find" etc.How can I do this in VB .NET? I have a very control intensive application and I must be able to easily loop through controls and check their values without writing out 10 x the code required.
View 8 RepliesI'm making a seat booking system in vb.net (WinForms) and I need the user to be able to select the seat they wish to use and for it to change colour (so they can tell that it selected).
I began to try using buttons, but 480 buttons seriously slowed down the load time for the form. I then tried a data grid view with buttons in the rows/columns, but couldnt make that work properly.
Would it be worth trying to use 480 picture boxes and change their background colour? Or would that just slow the form down the same way as 480 buttons?
How do i create a group of Radio Buttons? so they all act as one group and i'll be able to get the selected value of the group and not by checking them one by one.
View 14 RepliesI am trying to get 2 group boxes with radio buttons. I would like to check a radio button in group box 1 and have a corresponding radio button in group set 2 get automatically checked based on what I check in group box1. I am trying to do this in VB.
View 4 RepliesSo I have 2 panels and the same number of radio buttons added programatically in each panel. For ex.
RB1 -> Panel1
RB2 -> Panel1
RBo1 -> Panel2
RBo2 -> Panel2
I want to group RB1 and RBo1 and RB2 and RBo2, but when I add the radio buttons to the different panels they group each other. I tried adding RB1 and RBo2 to the same GroupBox but could not achieve the goal either. Is it possible to manually link the radio buttons?
I would like to have a single subroutine to service a group of radio buttons. I am interested in .CheckedChanged event. Right now, if I bunch them all into one routine, it gets called twice. One for the button that is checked and one for the button that is unchecked.
View 2 RepliesI am trying to change the button colors, in different group boxes,(Buttons and group boxes are in the same form). How can I change it?
View 1 RepliesI am currently trying to allocate a number of group boxes dynamically. Previously (in other languages) when I have carried out something like this I have used the '&' to substitute the contents of the variable direct into the code I.E
For I = 1 to 20
Groupboxname = "GroupBox"+I
Weatherstates.&groupbox.controlls.add(obutton)
next
This would then have the result of creating a button in all the group boxes, however this does not appear to work in VB .net 2010
I have looked at Directcast, but i am a even more confused. Is there a simple way to substitute the contents of a variable into the code ?
I am having trouble coming up with a way to add a selected radio button in a selected group box together.I have 3 group boxes each accessed by a checkbox within each group box there is 3 to 4 radio buttons. I would like to know how to add the selected radio buttons in each group box together and display them in a textbox by clicking a button "calculate". I believe I would have to make a global variable but I dont know where to start.
Private Sub Calculate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Calculatebtn.Click
Dim answer As String
[code]....
I know this code is wrong but I was just trying to remember the calculate function.Is there a command that uses the selected radio button from the group boxes then I would be able to input that into my calculate button sub?
How can I set a verification that something is checked in a set of radio buttons within a group box? So... groupbox1 has rad1, rad2, rad3. I want to verify that at least one of them is checked. I was going to do a select case, but I can't figure the syntax for the cases... Visual Studio 2008, btw
View 12 RepliesI understand because it has to be ON/OFF it won't go through to any other radio buttons in the group box. Would the best way is to use a hidden radio button that would switch control between the two? There's only two radio buttons i need to tab through, what's the best way to tackle this?
View 7 RepliesI am attempting to make the transition from VB6 to .net
I have a group box with 6 radio buttons. I want to perform a function when 1 of those buttons are clicked.
In VB6, I would have set up a control array and ran the routine when the array was clicked....but I am struggling with .net here, since there appears to not be control arrays at design time.
Is there 1 even I can use, or do I have to go into each radio button and code the individual event?
I am trying to write a program that will have different group boxes,
each representing a question, and each one has radio button choices
I am trying to write the program so that a while loop will go through each group box and check answers of radio button choices
the codes I want to know is the command to access different group boxes
and also how to keep each group box "seperate" enough that i can use same radio button names for all the group boxes...
Is there a better way to make a form with multiple buttons opening different things than having a form that has lots group boxes for each tab. So in the begining each box will be invisible and when you click the button the corresponding group box will become visible. Is there any other way?It will be like a background image and it'll have buttons that will mask it with invisible buttons. when the button is clicked it will open the corresponding group box.
View 5 RepliesI have a piece of software with two tabs, inside each tab there are buttons (the user can add the buttons when they want). when tab1 is full tab2 should start to fill. I currently know how many buttons fit on the screen so I just say something like if buttons > 150 then start to populate tab 2 The problem i have now though is if the resolution is changed then a different amount of buttons can be displayed. so if I put my screen to 1280x720 some buttons are left of. I was thinking of detecting the resolution and then using different cases for different resolutions but this seems very inefficient im wondering if there is a different way?
View 5 RepliesI'm trying to match up a specific group name and see if it exists for the currently logged in user using Active Directory roles. If the Group Name exists for the Current User, I want that group name to be displayed in a drop down list. Example: If current user is in BIG Group, display BIG in drop down list.Problem: All I am getting is SIDs and I'm not able to get anything to match up to the group name and nothing will show up in the drop down list.I also get the following Error:Error: Object variable or WIth block variable not set.How do I fix this?? here is the code I am using:
Private Sub GetMarketingCompanies()
' code to populate marketing company drop down list based on the current logged in users active directory group that
[code].....
Enumerate if an Active Directory group's member is user or another group
View 1 RepliesI know how to check whether an item exists in a list using (MyList.Contains), But I do not know how to check the whole list. For example (use one button and one richtextbox):
[Code]...
I am writing an application and I do not know how to reference a group of controls inside a group box. I will include the code I have written so far and a picture with a detailed explanation as to what I am trying to do. Feel free to comment on any discrepancies that you may notice in my code.
Code:
Public Class Form1
' The following class-level constants are used
' to calculate the price of the model
Const decCOUPE As Decimal = 18000
[code].....
I want to remove a group (include all items in this group) in ListView, but unsuccessful, the code is below, why?
ListView1.Groups("GroupName").Items.Clear()
ListView1.Groups.Remove(ListView1.Groups("GroupName"))
anyone have some quick code on how to do this?
wmi is not a option.
Writing codes for a school project I have to do. Basically I need to make a program that when you click a picture box it replaces the picture with an image in a second picture box on the same spot on the form. I am not sure how to do this. Right now I have the two pic boxes side by side and when I click one the other disappears as it should, but I can't get it to reappear so one can click between the two alternately.
View 7 RepliesI'd like to do a kind of overload of the actions in the controller.
Is it possible? 'Cause I havn't found any info about it. And when I tryed, I got this error.
The current request for action 'Create' on controller type 'InterviewController' is >ambiguous between the following action methods:
System.Web.Mvc.ViewResult Create() on type
[Code]....
I've tryed few things to get what I wanted. The last one was to copy what was done in the "Edit" action, but for an empty rank. (so I created an empty rank in my DB). I don't think it was a good idea (imagine someone wants to update the DB where idOpportunite = 5...)
I am making a file viewer, and I would like to have the option to open each folder in a new window, but how would I go about start my program and making it open in the correct directory? This is the function I have to open a directory into my viewer: openDir("path", "*"), All I need is to start the program so that this will activate after it's start up.. Is this possible to do?
View 3 RepliesI have just published an app i was making. However whilst testing i noticed when i close the app using the Exit button which contains the code below
[Code]...
I want in my VB application launching my Browser (or displaying in a WebBroser Control) a Website. But my php website has an authentification page, so i wish my vb code write the login, the password, and press enter (or click onto an image that run an Ajax function).
View 3 RepliesI am developing an application in ASP.NET MVC structure.I was wondering, I am trying to create a site that only has one page, it has a navigation bar on the left (Which is a list of user input), and then the main content in the middle.My question is, can I make the navigation bar (The user input list) static, and make the main content change, based on the user input, with an asynchronous AJAX postback? I would have multiple controllers which would set different results to the main content, based on the user input. How would I go around doing so, partial views and calling actions with asyncpostback's?
View 1 RepliesI'm trying to use WebBrowser to remotely log into a site and perform a basic action on the site.
The first step is logging in to the site. Here's the form code for the login:
I want to do the following:
msgbox("Welome to this app!")
*5 secs later*
label1.text="1"
*5 secs later*
textbox1.text="yay"
[Code]...