I have a form that is used at design-time to configure various properties. I've tried two ways to do a form-level catch all exception:
(1) I add a handler to Application.ThreadException in the constructor.
(2) I wrap the Show method, of the form, in a Try/Catch block
Both of these work at run-time when I test by adding a property grid to a form and set my component as the SelectedObject. However, at design-time the form simply closes with no message whatsoever; neither my message nor any message explaining that there is an unhandled exception. This is not about debugging at design-time. It's about how to present the user with a friendly message when my type editor encounters an unhandled exception.
I've created a custom clipboard because it's not possible to make my whole class map serializable - which is a requirement for the windows clipboard.However, I need to distinguish between users who are using my clipboard through a unique id. Basically, I want to be able identify a person who is sat at one PC with one or more copies of visual studio (or similar) open.
I have a class that has a readonly collection property - Its a list of extender providers that have been applied to the control.I've implemented a simple property descriptor for the collection so that the property can be expanded in the property grid to examine each entry.
When I select an extender provider and set it to false, I remove it from the collection. The GetProperties method of the type converter is requeried and the property grid refreshes.However, when I set an extender provider to true, and thus add it to the collection, GetProperties is not requeried.
Somehow, the property grid is making a distinction between adding to and removing from the collection. Or alternativly, its refreshing when an extender provider is added, but not when one is removed.
(I've answered the question below with a hack. I'm fairly confident in it unless MS change the way that codedom serializers the designer code.)ETA2:I've worked out what is going on. I wondered why sometimes it would work and not others. It boils down to the name that I give to the internal property and the collection.If I rename the property 'Annoyance' to 'WTF', it will serialize correctly because 'WTF' is, alphabetically, after the name of the collection - 'InternalAnger'.It looks like the serializer is creating instances of objects alphabetically and needs my internal property to be created by the time it comes to create the collection.I can fix this with a rename, but that's a hack and I fear that writing a custom serializer is a big job - which I've never done before.ETA: Jesus, I'm sick of this. This problem was specifically about persisting an interface collection but now on further testing it doesn't work for a normal collection. Here's some even simpler code:
Public Class Anger End Class Public Class MyButton
This may be a debugger issue, but here goes:I have this piece of code:
Private Function Connect() As Boolean Try sessionBegun = False[code].....
My intention is to 'convert' the low level exception into something more meaningful, so I throw an exception of my own creation. I want this to bubble up to a place where I can handle it.However what is happening is my debugger breaks and tells me that an exception of type "QuickBooksConnectionException" was thrown.I know that, I just threw it, why are you catching it? From what I've read, this ought to work, and there doesn't appear to be an analogous Java throws keyword, so perhaps it is my debugger.
I am working on a windows forms project that will allow a user to have an interface to the database, and another will be a nightly run process file that will update the database table.The user will add new records to the table, whereas the nightly process will update the columns with new values (think mortgage interest rates)
Both these projects will be using the same business logic component that has the calculations needed to enter values into the table.The way I am figuring this out, is that I will have two exe's (one for the interface and one for the nightly process) and have a central object that will host the calculations. What would be the best object for this purpose?A class file?A windows service? (I want to stay away from a windows service, because it will have to be running all the time)
I'm coming from ASP.NET background and lately I started developing winforms applications for my company, I had no problem with the move from ASP to winforms programing wise, the only thing i have problem with is to my program to look good across different screen resolutions, resolutions is big problem when developing for the web as well, but I already learned and know how to handle those problems and make my website to look good under almost any resolution what I'm really asking, can someone experienced in this area tell me what are the rules and guidelines i should follow and obey for my winforms application will look good in most resolutions.
using VS2008, targetting framework 3.5I have a rather complex UserConrol which does some of its own rendering.I display this UserControl on a form.Opening that form in the Designer creates an instance of the UserControl in the Designer, which tells me a NullReferenceException is occurring in one of my rendering methods.I have attempted to correct this by making alterations to the UserControl's default constructor, but have not found success.
Is there a shortcut to get to the designview form in a winforms project in visual studio 2010.F7 will take you to code behind class form and shift + F7 will take you to design mode. Is there a shortcut to filename.designer.cs formWhere you have the control definitions, delegates (for click event etc). defined. I go to the form often if I change the name of click event etc.I have to go through solution explorer and click on the file. Is there a shortcut like F7 that opens the designer.cs file?
I'm trying to do a Report Designer for end user. Like the one that adds vb.net when u add to proyect a .rpt file. But i wanted to do it on the run, so the end user can change the desing of the report as they want.
I created a TaskBar application in Visual Studio which minimizes itself inside the system tray and show notifications to the user based on the database change. Whenever a new task assigned to the user he will notified at the system tray like a balloon popup. But whenever the applications runs for an average 15 hours time suddenly my applications crashes and shows out of memory exception.How can i debug this issue ? I can't wait for 15 hours and check for this issue? Is there any tool available to check the memory leakage of my application which can directly point at my issue? How can i generate out of memory exception to my program so it will be debugged easily and fast?
I have a winform where I have some controls like TabPane, Label, ....When I launch my application without localization, it works fine. When I put localizable parameter True, I have this error :
TargetInvocationException was unhandled
Exception has been thrown by the target of an invocation.And when I debug my application, I follow the execution, program begins executing InitiliazeComponent(). I press F11 to continue the debug, program executes the TabIndex event of my TabPane and on the first instruction it crashes.My environment is VS2008, Framework 3.5. I store my project on a network hardisk (I test on local and it doesn't work too)
I have a Windows Form application that has a global error handler to display unexpected errors.
Namespace My Class MyApplication Delegate Sub ProcessParametersDelegate(ByVal sender As Object, ByVal args() As String)
[code]....
1) for the same deployed code, I SOMETIMES get line number in the displayed StackTrace error message and sometimes do not, even when the error message includes source code that I have written rather than a referenced binary. The project is compiled with a DEBUG configuration.
2) The application strangely minimizes to the tray when the error occurs (I thin it is unlikely that anyone can diagnose this issue w/o my more code posted, but I'll mention it anyways)
3) When I try to intentionally raise an error by, for example, dividing by zero hoping to test by global error handler, I get a dialog error message from the interactive debugger rather than jumping into my global error handler (which i want to debug because there is more to it than I posted.) Do you have any idea how to triggerand force teh execution of the global event handler?
i have a data set on the data set many data adapters .i add a data adapter in the data set the designer was automatically delete then lot of error was coming and i search in google and i go this method and i do that right click the data set and "Run Custom tool" on that time the designer will automatically created. but when i do that a error was coming "The custom tool 'MSDataSetGenerator' failed. Exception of type 'System.Data.Design.InternalException' was thrown."
I want to have a bunch of different screens, yet I don't want to have to use 20 different forms (I'm pretty sure that's bad practice anyways), and I don't want to lay down all the controls at once in the designer because then things get messy. I had an idea of running a sub on startup that would dynamically generate all the controls I need with all the right coordinates and settings, and then dump al the ones needed for a specific screen into a Panel. Then I return an ArrayList of panels, and pull out the correct panel to attach to the form when I need that screen. The only problem is that my form will not have any implicit knowledge of its controls, so I'm assuming I wouldn't be able to use the WithEvents / Handles. keywords to declare handlers in the form class (which is what I'd rather do).
I want to bind Grdiview with DB.I have a table Products with three columns.Suppose I add three columns at design time in gridview, If I run my following code First Three columns are blank & next three columns are bind with data.
Suppose I do not add any column in GridView & runs the foll. code,then the output is coming correct.
OK i have a combobox on the form. I have entered 4 values. I have left the TEXT field blank.Is there any way i can set the default SELECTEDINDEX of the combobox in the form design window. I know how to do it using code. If i set the TEXT field to one of the item values will it automatically select the corresponding INDEX
I created the dataset and connection to my SQL database at design time to make it easy to drag and drop bound controls and stuff to my form. My problem is this, when I did this it creates the connection string in design time also, but the connection varies depending on where the software is installed after the development.My question, is there anyway to set up the bound controls on my forms and everything with the typed dataset created in design time on the connection created in design time... then when the application is run, can it change the connection string at run time to get it connecting to and creating the dataset from the the correct sql database?
I have a problem. I have created a control, Now whenever I am going to Drug that control on my form then a error popup will appear that says "Failed to create component 'XXXXXXXXX'." System.IO.FileLoadException: A strongly named assembly required. HRESULT: 0x80131044 Is there any facility available in .NET for design time debugging Means If I drug a control on form then I will allow me to debug the control.
In some of the forms ,whenever i change some properties using the Properties Window of some controls or the form they get reflected in the Properties Window but will not get changed at Run Time.
I am facing this in quite many of the forms, hence i am applying the property changes in form load, this is causing performance breach .
I'm making a quite large database management program(well actually 3 databases) and I am going to be creating a tab page for each database and under that a tab page for each table. each database has +- 200 tables and each of those has between 10 and 50 columns. I am also gonna put controls on each tab page of a table that represent a a row of data.I need very specific tooltips, functions for each table so generating it would be to complicated for me.
I need a automated way of creating controls on design time depending on the column datatype like a rich edit, text box or numeric up or down. and a label that has the same text as the column name It should also rename the name of the control to something appropriate .This can be done using visual studio's database wizard, but last time when I was about 30% done with one database it had already auto generated more than 1000000 lines of code. When I ran my program it took 10 minutes to show the first form and I have a powerful pc.
I vaguely remember something about a hotkey or menu that would group controls together at design time so you could drag 2 or more controls around and they would remain relative to eachother. You could work on something else and come back and the controls would still be grouped.
Does anybody know what this feature is called and how I can access it?
Basically, in the designer I want to be able to connect a collection of objects to another property. When the collection is set, the property should display a drop-down allowing you to select one of the values from the collection. It is a collection of a custom class.Right now I have the collection implementing the IList interface from the System.ComponentModel.Generic namespace. I've looked into type converters, but I haven't been able to figure out yet how to get them to work for my needs.
