Yesterday I installed vs2008, installed SP1 all seems well.I have converted a project (from VS2005), it works fine but....When I try and modify any of the forms none of the controls aer displayed on the form.Additionally I have noticed that each form has a formname.designer.vb file, the top few lines of the code in the designer.vb files are;
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class frmFullMarketView
Inherits System.Windows.Forms.Form
[Code]....
Then my controls are listed. Do I have to copy the code held in the seperate designer.vb file back to the 'formname.vb' file for all my forms?If so, why does VS2008 create all this extra work when converting forms from vs2005?
I am desinging a form with mutiple controls on a tab page control and was moving controls between tab pages by cutting and pasting them. The forms designer obviously got confused at some stage and I now have controls that are declared in the designer.vb but do not appear anywhere on the form.
I can't even rename the controls that are there which have been given generic names to the names I want because they apparently already exist. I realise I could edit the designer.vb and remove the references to these controls but that seems fraught with danger?
At the moment, I'm writing tons of custom control, which all fits my needs. But the thing is, each time I Debug the project, it doesn't update the form designer at all, not even the code. My solution to this is to Rebuild the project, which can take time. This is very frustrating.
I'm using Microsoft Visual Studio 2010 Ultimate to compile.
basically i have a form with loads of controls. So many infact it stretches the whole hieght of my screen.I only need half these showing since the rest are just a sort of 'log'I have seen ti done loads, that only the controls i want to show at start up are displayed then when some one hits a little button in the bottem it expands the rest leaving them showing to.
I've removed a few controls from my form, but they're still in the properties. I've looked in the Document Outline, but nothing. How can I remove them (save)?
If for any reason I close the designer view of a window and then save the project, i can never see the designer view again. other forms that I have not closed the design view can be seen. When I run the project, everything looks fine, I am just not allowed to change the visual.
When I create an inherited form, after creation for some reason I cant see the form to edit in designer, I mean I cant drag and drop buttons, labels or any control to it since I just CANT see it, I have included a pic of what I see below where Form1 is the Inherited Form. What Am I doing wrong or what is happening
I am attempting to update an existing winforms application, that was created with a dataset control on all the winforms pages. I have ported it from VS 2008 to VS 2010 and I need to update the database section and connect it to the SQL backend using traditional code method.In the Solution explorer, when I click on the Dataset files, and click "Exclude From project" I am unable to build the project.Is it advisable to comment out the code lines that refer to the dataset in the .designer.vb files?
My self and most everyone else on our team is having the same issue with VS2008. The designer will not render many forms in designer mode. Currently I am getting this error "The type 'Team.CAD.UI.My.Resources.Resources' has not property named 'view_16'" Well veiw_16 is in the resouces file.
I have a bunch of controls on my form and am wondering if I can hide some so it doesn't look so cluttered.I only wnt to hide them on the designer though and not at runtime. Any way to do this?
I am very interested to see the answer as I would like to know the significant differences (if any) of generally using one more than the other. In a few days, I will be starting my Java programming class to familiarize myself with the language.I do know that Java uses objects.My question/discussion is not necessarily related to .NET (although in a way, it is); my question is more about what is a better practice and why.Is it more proper to declare buttons and such through runtime rather than designer? Is it just more work typing everything? Or does build and run much faster?
I have two controls inside a user control. They are set to be anchored left and right in order too size with the window as it changes size. For some reason I'm having tons of issues getting this to work properly.
Particularly, when ever I build the project and the control reloads itself, these controls triple in size, and extend way off the control. If I re size them and repeat the process it happens again! Anyone have this issue or know what might cause it?
What is happening is after dropping a few controls onto a new windows form. I have found that for no apparent reason some of the controls just go missing. As of this post i just dragged a group box with a half dozen labels buttons and textboxes off to the bottom of the designer. I went to move them back up and found that i had lost 2 labels and 2 textboxes! Doing a clean build gives no errors. Windows still thinks they are on the form.
Visual Studio 2010 Windows Applications Visual Basic-- not able to resize or move controls or form with my mouse in designer window. When hover over sizing handles or form edge, cursor changes to double headed area but nothing moves. I can drag controls with mouse onto form. I successfully resized by pressing shift key and using keyboard arrow keys. I am using Toshiba Satellite L665D, Window 7 64x.
Is it possible to connect ado.net to an xml file and then make the xml file a data source on my project where I can bind controls to it in designer mode?
I have come across a problem with visual studio 2010 & vb.net. i have a few custom controls on the form and few standard controls. When i build the application, the custom controls automatically change size and location. Anchoring and Dock properties are fine. Anchored to Top Left without dockstyle. Even if i fix the location and size in design mode, after i run the application the controls again change back to weird position.
With several forms of mine, I occasionally run into the following issue: I edit the form using the designer (Visual Studio 2008, Windows Forms, .NET 2.0, VB.NET) to add components, only to find out later that some minor adjustments were made (e.g. the form's size is suddenly changed by a few pixels), and controls get deleted. This happens silently — event-handling methods automatically have their Handles suffix removed, too, so they never get called, and there's no compiler error. I only notice much later or not at all, because I'm working on a different area in the form.
As an example, I have a form with a SplitContainer containing an Infragistics UltraListView to the left, and an UltraTabControl to the right. I added a new tab, and controls within, and they worked fine. I later on found out that the list view's scrollbar was suddenly invisible, due to its size being off, and at least one control was removed from a different tab that I hadn't been working on.
Is this a known issue with the WinForms Designer, or with Infragistics? I use version control, of course, so I can compare the changes and merge the deleted code back in, but it's a tedious process that shouldn't be necessary. Are there ways to avoid this? Is there a good reason for this to occur?
One clue is that the control that was removed may have code (such as a Load event handler) that expects to be run in run time, not design time, and may be throwing an exception. Could this cause Visual Studio to remove the control?
The code generator creates code with references to a component I am using, before it's dependent components (datasets) are initalized. Although I can correct this by editing the form.designer.vb file, everytime I make a change on the form the code is re-generated in the wrong order. Where does VS2008 store information about the order of the components for code generation.
This Runs: ' 'AppointmentBindingSource ' Me.AppointmentBindingSource.DataMember = "appointment"
A recent project of mine has been to make a designer. I've finished everything, but when I click the controls to show the properties window, the control interacts with the cursor. So my question is: How do I freeze the controls from interacting with clicking or key presses without disabling the control itself?
I am trying to fix a vb.net program that works with windows xp but not windows 7. The following steps will recreate the basis of the problem I am having. 1. Run MS Visual Basic 2010 on Windows 7.
I need transparent panels. I simply set that background color of controls to Transparent - this does not solve the problem, as the transparency simply shows the background color of the form, but does NOT show any controls placed on the form, which is the crux of my problem.Why? Because I'm trying to use this skinning example, which does the skin by creating a user control, and make the panels show the skin's background:[URL] It seems I'm going to have to override the panel and paint it's background manually, but I don't understand how it all works; I've created a new class and overridden the panel, but the painting stuff is way above my head.
In the form's class:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'Panel1.BackColor = Color.FromArgb(0, 0, 0, 0) 'supposedly a trick to make a gradient background on the form
I have a form that searches a db. Some searches will always result in one row of data, others might return multiple rows. I want to have the data from a single row shown in text boxes and the multiple rows show in a datagridview is it possible to hide/show those depending on the amount of rows.
I have a solution with about 5 projects, the main (startup) project is a windows forms project while the others are control libraries that contain some custom controls. The main winforms project however also contains some custom controls.
Recently, the controls in the main winforms project have stopped appearing in my toolbox. The controls from the other control library projects appear just fine, but none of the controls in my main project will show...
Some of the projects are VB, some are C#.
I have tried everything I know to fix it:Delete bin/debug folders and restart Build, build, build, build, and build Target the same .NET Framework version and CPU platform in all projects Build again Nothing works...
All projects target .NET Framework 4.0 and compile for the x86 platform (since I am using Access db). All projects build successfully, no errors. I can run the solution just fine. I can even declare and add the controls in code and they work just fine. They just don't show up in the toolbox so I can't drag them to my form and I have to dig into the designer code everytime, which is really annoying!
I have created a series of custom user controls for a wizard interface that I am making. Each user control represents one step in the wizard and really shouldn't be used outside of the wizard. The thing that is bugging me is that each wizard step user control shows up in the toolbox of components to insert into a form.
Is it possible to hide a user control from the toolbox? Better yet is it possible to hide a user control from other classes not in the same namespace of an assembly? Is this a good approach or should I think of a different approach?
I was busy with a project, i'd thought I take a pauze of an hour I closed my computer. Now I open my project I have my wirtten codes but I can't see the designer anymore.. what can be the problem and how to get it back?
I use MS visual studio 2010. I did open designer and view the form for the same file A before. But after some small changes, I can no longer view the form designer.vb, but can only view code in designer.vb. Even if I go back to the original source, I still can not open designer!!
The error is: The designer could not be shown for this file because none of the classes within it can be designed. The designer inspected the following clsses in the file A-The base class BaseClass could not be loaded. Ensure the assembly has been referenced and all that projects have been built.
i have a control dll and i use this control in my project then i change this controls codes after i do it . appears some error on this lines in form1[designer]
Me.Dentisyon1 = New WindowsControlLibrary1.dentisyon Friend WithEvents Dentisyon1 As WindowsControlLibrary1.dentisyon what should i do?
if i click the designer tab i can only see a white form and the text say "Me.Database1DataSet.DataSetName = "Database1DataSet" and "The code within the method 'InitializeComponent' is generated by the designer and should not be manually modified. Please remove any changes and try opening the designer again"?
