Dock Forms And Move Them Together?
Mar 22, 2011How can i run form2 in form1(i mean under one process) and when i move form 1 form 2 also should move.
View 4 RepliesHow can i run form2 in form1(i mean under one process) and when i move form 1 form 2 also should move.
View 4 Repliesi want to snap or dock two forms together and have them move as one. i tried to download SandDock but i can't get it to work.
View 2 RepliesThis should probably be a different topic, but the reason I was cutting/pasting is that I have a split panel form. I dock a toolstrip to the top of one panel, and then add a datagridview control. I set it to dock to parent, and it does, but goes under the toolstrip, hiding the top of the grid and scrollbar. Not acceptable of course. Is there a setting that I'm missing?
View 2 RepliesIm working on my project. and i just asking if i can used this Property in vb. NET [URL] when i install adobe photoshop .. i see on the leff installer...something like a menu and the menu move step by step when the user move between Forms
Welcome
Serial Number
Adobe ID
Install
Finish
How i can create like this in VB .NET
I know how to dock a component using the windows forms designer as well as through code but I am having a problem with one thing. I am trying to dock a richtextbox on a panel through code but it seems to be filling up all of the space instead of just the panel. When I put it on the form and dock it works fine. The code I am using is:
[Code]...
I am designing a simple user interface using winforms. In the designer I have a panel on the form and would like to add a datagridview control into the panel at runtime and set the dock property of the datagridview to 'Fill' so that it fills the panel.
I am struggling to do this and following code is not working out for me:
Dim MyDataGridview as New DataGridView()
MyDataGridView.Dock = DockStyle.Fill
Me.MyPanel.Controls.Add(MyDataGridview)
I don't get an error but the datagridview isn't visible. It gets added 'behind' the panel and so I tried using .SendToBack() and .BringToFront() methods thinking that the panel was hiding the datagridview but this doesn't seem to work either. At any rate, it seems like the datagridview is being added to the form but just not docked within the panel
I have made a from with a panel docking inside. And a second form with properties set to form_load:
Me.TopLevel = False
Me.Parent = Form1.Panel1
Now it loads nicley inside the panel of the first from.... However, I can move the second form outside the maximum size of the panel inside form1. Is there a way stopping this? Here's an image of it: So I don't want the second form to go out of the inner panel of form1. But I can move around in the area visible!
i have vb.net form contains one datagridview with data from database
my datagridview load data at the time of load event of form
i have one textbox1 in my form
my focus is in textbox1 t the time of load form
i need to move up and down through my grid when i press up or down arrow accordingly
currently i should click in any row then only i can move
how i can move between rows using up and down arrow by keeping my focus in textbox1
what i need to write in keydown or keypress ??
i need always focus in textbox, moving through grid up and down using arrow key regards
I'm using KeyDown to get the picturebox to move around, but I don't know how to keep the boat within the boundaries of the form. So if it hits the side of the form, I want it to just stop.
What control/procedure should I use to do this?
Im trying to make a radiobutton move diagonaly, (Dont ask why a radiobutton, i did it in college last week) For some strange reason though I need another radiobutton just going across the screen in order for my diagonal radiobutton to move.I would like to develop this into a game like pong, when I have gone further into VB.
View 3 Repliesim having trouble with moving listbox items between several listboxes with the click of a button?
View 3 RepliesIve made a calculator that estimates how high a model rocket will go. I was intending on making a simulation that will show you visually how high it will go. (Little rocket image goes up and stops at estimated hight) I know how to make a picture box move and everything, but i can only make it move to a set distance.
View 3 RepliesI would like to know if and how I can move a selected item in one listbox and the second listbox moves the same item aswell (so they move in sync).I can move the items in one listbox with the following
Private Sub UpButton_Click(sender As System.Object, e As System.EventArgs) Handles UpButton.Click
Dim index As Integer = ListBox1.SelectedIndex
[code].....
I have a problem :
In VB.NET.
Window Application :
I have a form..in that form..there are four buttons and an image (using picBox). That buttons named as "Up", "Down", "Left", "Right".How to move the image by using the button. For example : If I click "Up" button, the image will move upward and so on..
I've created a private sub which enables me to move to the next object when I press enter in the textbox or any input controls... What I want to do is to create a universal sub procedure for moving to next object. this is my code
[Code]...
I've created a login form that allows users to type in their ORACLE database password. once authenticated, the form loads up the main application. my question is hopefully simple. How do i "properly" load the main app form? also, when they close the main app form, how do i shut down the application cleanly? Right now, the login form is always present, and until i close it, the app doesn't shut down. the way i'm loading the main form is as follows:
[Code]...
When we left click a grid cell, or list item, it highlights. Left click outside it and the selection jumps to the new place.
I can RIGHT click anywhere in the grid without disturbing an existing highlight, but I want it to work more like windows explorer would in terms of file selection..
i.e. if I right click inside the range, the range stays, if I right click outside the range, the range moves to a new single cell that I just right flicked.
Try it now on this page. Select some text, right click on the selection and it stays. Right click outside the selection and it goes. In datagrid (for example), the selection can only be modified with a left click.
How can we change this so the selection behaviour of a datagrid/list is more like this text pane?
On a related note. If I left click in a textbox I can drag a selection out. If i wanted to right click and drag the selection out, would it be the same process? (It's for a custom string manipulation picker control..)
When it comes to threading. I've managed to adapt one of JMcIllhinney's backgroundworker codebank examples to somewhat suit my needs, but not completely. I have a main form, and a second form that appears while I'm running through a for loop. It informs the user what is currently happening. I set up a backgroundworker that allowed me to continue to use the main form during the for loop, but the other "status" form was completely frozen, and any labels or graphics were shown as white boxes. I am struggling to figure out how to be able to move/interact with both forms while the loop is running.
View 4 RepliesI currently have a working program that creates one colored pixel in a Bitmap, displays the bitmap in a pictureBox, and "jiggles" the pixel by making it move in a random direction by 1 pixel every time a button is clicked. I want to make the pixel move automatically until a Stop button is pressed.
[Code]...
Theres no error that is stroked with red but when i try draging a icon i just dont work ::(
heres the code:
Imports System.Runtime.InteropServices
Imports System.IO
Public Class Form1
Public rowz = 50
[code].....
I am trying to get my VB6 app to "dock" inside my vb.net form. I currently am using this [code]...
View 6 RepliesI'm trying to dock my form to the top of the screen, but not as a desktop toolbar. There must be a simple way or a property... I just want it to start on the very top center of the desktop, I can't figure out how?
View 7 RepliesCan any one tell me is it possible to dock one object to another.Currently i have a datagridview in my form which i docked to bottom at runtime.after that i added a status bar to the form, and by default its docked bottom at design.when i run the application. status bar has come above the datagrid. and the grid is docked to bottom.
I want status bar to be at bottom of the form and Datagrid to be docked to the top of the status bar.is it possible.PBL (Visual Studio 2010 Professional, Win 7 64 bit Ultimate)
This is a big idea and I'm unsure of how easy or difficult this really is. I do not know how I would get this even started. What I am trying to accomplish is "docking" so to speak, a sub form into the original. Basically, there are 2 forms open, but one is like a helper so to speak. This concept is not new as many programs use it. An example is a program widely used call Teamviewer. If you use Teamviewer, open the "Partner List" Pane at the bottom to see exactly what I am talking about. Basically, it opens a new form that is next to it.
[Code]...
How do i get a Shockwaveobject to dock into form1
View 1 RepliesI created a basic winform project where I want to handle all resizing without writing a single line of code. I set up controls using dock/anchor. They all work properly, until I add a custom UserControl. When I first press F5, the project works fine. However when I get back to the IDE some (but not all) controls which have anchor right/bottom are resized/moved into positions and sizes not previously defined. Some cannot even be restored as they are moved permanently below the container's boundary with coordinates above 2000. If I fiddle around and test the project many times, all controls with right/bottom anchoring will go haywire eventually.
If the custom UserControl has controls inside with right/bottom anchoring those also get resized in weird ways. Adding the controls again solves the problem temporarily. It is the IDE that moves these controls around since these movements are displayed in the undo stack right after I exit testing the project (however,undoing these steps only messes things up even more).I am using VB 2010 on Windows 7 x64.
Basically I want to make a dock bar that is on the desktop, I want to be able to drag files into it and when the files are dragged in there icon appears and when you click the icon it opens the file
View 14 RepliesI am new to VB 2008 programming The first project I've been tasked with is creating a ticker/notice-board for our office - which will show Horizontaly scrolling updates of incidents being reported. I'm ok with the scrolling, keeping on top etc - but what I am unable to do is make my form dock to the top of the desktop window, and make any other applications windows smaller.
So that when any other application is maximized, it's window will not go behind my ticker application - so people can still easily use any other applications toolbar etc. Is this possible to do in VB 2008?
Is there any compnent I can add to add a mac-like
View 8 RepliesI have a tab control on my MDI parent form that I want to have docked so just the tabs show from the bottom up on the screen. Then on mouse over it slides open to reveal another form/controls that are contained in the tabs.
Just to understand me a little better I am including some images.
The first is where I want the tabs to start. The second is where I want it to slide to on mouse over or click.