Find Strings Within Notepad Text File?

Sep 15, 2009

I am trying to write login page code for the login button but can't find how to find a string in a .txt file. The only code I have managed to find on the subject is opening up the text file with the

FileOpen(1, "File location", OpenMode.Output) code, but even this would be best removed as it would open the text file containing all usernames and passwords within the file.I need the system to search for a specific string within a file ( Usernames___Passwords.txt (159bytes)Number of downloads: 134), and with that string find the password associated with it (in my attached example the letters/words after the apostrophe) but stopping at the end of the line.

View 7 Replies


ADVERTISEMENT

Find Duplicate Strings In Text File?

Jun 30, 2010

I have a text file DIC.TXT.[code]...

View 4 Replies

Find And Sort Multiple Text Strings?

Jun 6, 2011

I've been working on a small project to sort through multiple text files which have all the same strings. Basically, I am looking to sort through and create a text delimited file for future use. The below script is what I have come up with so far, and have tried several "For Loops" but found that I was lot worse off than working with the "Do"[code]...

View 7 Replies

VS 2005 : Format Of Text In Text File (eg. Notepad)?

Aug 16, 2010

Currently, I've used System.IO.StreamWriter to write items to a text file. However, what I have are items separated by a Writeline(). Meaning, the items are displayed in several rows, in a column. But what I want is a single row, with many columns, separated by commas for each item. Example of what I want: 16/8/2010,100,you

vb.net
Dim psBattery As PowerStatus = SystemInformation.PowerStatus
Dim perFull As Single = psBattery.BatteryLifePercent
Dim Now As DateTime = DateTime.Now

[code]....

View 2 Replies

VS 2010 Find, Replace Certain Strings In Text Files?

May 19, 2012

First it might sound like an ordinary task but keep reading it isn't. I can't figure out how to find a phrase in a text file, and replace it with something else. Tried lots of things but always ending up with empty hands.

Suppose there's a text file in this order:

valueabc=6000.0000
valuettt=200.0000
valuexyz=7000.0000

I want to;

1) Find the phrase (e.g. valueabc) by scanning the whole text,

2) Replace the number that starts after "=" and ends before ".", namely "6000" in the middle with any number value i want.

I don't need the parts before "=" and after ".", only the number in the middle.

View 10 Replies

Opening Resources In Text File Format In Notepad

Dec 31, 2009

I'm having some trouble using resource files. In my project I'm using a bunch of bitmap files and two txt files. Bitmaps are used as backgrounds for controls, but .txt files I want to open in Notepad or WordPad. Till now I was accesing them from a file path on my machine:
ControlName.backgroundimage = New Bitmap(direcorypath & "/Map.bmp")
Process.Start(direcorypath & "/Instrukcje.txt")

And it worked fine. Now I added these files to my resources (it's practical for me to have them in executable file) And replaced those lines with:
ControlName.backgroundimage = New Bitmap(MyProject.My.Resources.Map)
Process.Start(MyProject.My.Resources.Instrukcje)

For bitmap it works fine, but for txt file an error occurs saying that a file cannot be found.
Interestin thing is: when I type "MyProject.My.Resources.Instrukcje" in "Watch" it shows the content of the file. So it is there, only not as a file?

View 1 Replies

What Is The Codes For Open And Save A Notepad Text File

Aug 20, 2009

what is the codes for open and save a notepad text file

View 5 Replies

VS 2005 Process Class - Use Notepad.exe To Open Another Text File

Apr 21, 2009

Suppose I have this Dim proc As Process proc = Process.Start("Notepad.exe", "C: est.txt") Now, if I want to use Notepad.exe to open another text file (ie. C:2ndTextFile.txt) without closing it, how am I going to do it?

View 7 Replies

VS 2010 Save Text File Then Immediately Open It In Notepad

Feb 3, 2012

I have searched, but failed to find a suitable answer to this. My small app saves a text file using a savefiledialog and stream writer. Then if successful, displays a messagebox confirming sucess and asks if the user wants to open the text file now. and this is the problem... How do I determine if the user has changed the filename and or path in the savefiledialog when saving? I'd prefer not to hard code a path and file name if possible.... but that seems like the only option? and therefore I can't show the file straight after saving reliably??

[Code]...

View 8 Replies

Find Text "strings" Using Tags Or Labels?

Feb 23, 2010

I've got a lot of text that I'm pulling into a string, potentially.

In the text - I'm embedding "Tags" or "Labels" for certain sections. These tags will be used so that I can pull text out of this one string and then break it down into parts. How would I go about doing something like this? Each "tag" will begin with the tag name in square parenthesis and end with /name in parenthesis.[code]...

View 3 Replies

Find Strings Inside Strings?

Aug 15, 2011

I have been looking for examples to find the string between two strings. This top one works fine;

Public Sub ReadData(ByRef keywordStart As String, ByRef keywordEnd As String, ByVal filename As String)
Using reader = New StreamReader(filename)

[Code].....

Now the first one is fine - Ext_Volume is result of the string between the strings <Volume> and </Volume>. <Volume> and </Volume> are unique so this is straight forward.

However the second one - "^FDExp:" is unique, but "^FS" is not unique. There are occurances of "^FS" before and after "^FDExp:".

How do I get the string to search AFTER the occurrence, not before etc?

View 5 Replies

Separate Strings In Text File?

Dec 16, 2009

I am reading a text file in which has three colums of information i.e.

00100 25690 21586
23510 25694 24856
25896 45478 52897
58745 59687 12364

I want to read the whole file, and split the colums so each set of numbers is put into an array to be used as an input for later. If the text file only contains one line of numbers like 00100 25690 21586, I have written a code to seperate those and put them into an array which is attached. If the text file contains more than one row of numbers I can read the whole file in line by line but I can't get the strings seperated.

[Code]...

View 11 Replies

Re-arrange The 3 Strings Into 1 String Into A New Text File?

Jul 17, 2009

How do i re- arrange the 3 strings into 1 string into a new text file?

what i have in the text file:

VERSION 600
LIBRARY [2009/6/15 15:02:14, 2009/6/15 15:02:14] temp.gds
UNITS 0.001 1e-009

[Code]....

View 2 Replies

IDE :: Read And Parsing Strings From CSV Or Text File As A Command

Feb 18, 2010

I'll start off by saying I am using Visual Studio 2008 Standard. I am creating a program that will open installed programs using short code. For instance, if a user types in 'npp' then Notepad++ opens. I have it working just fine to respond to the predefined commands, but I would like to expand it so that the user can define their own settings simply by typing the program directory and the custom short code they want: Example: If I am an end user and would like to say define a short code for Windows Media Player, I would simply type the following: (Assuming Excel or likewise is used to open the csv file).

[Code]....

View 3 Replies

Reading Text File In Directory And Finding Certain Strings

Mar 11, 2010

All I am doing is reading each txt file I find in a directory and finding certain strings in the text then counting how many I find in each file and then once each file has its separate counts it send it to a sql database. I have most of it done, but I cant seem to get the count to separate each file so my problem now is that it counts the first file but when it counts the next file it adds to the first file and so on through all the files

Imports System
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
[Code] .....

View 1 Replies

[2008] Parse A Large Text File For Certain Strings

Feb 22, 2009

I am trying to parse a very large text file for certain strings. The text file is part of a level-making software for an old game I play. The text file basically contains all the information the level designer software needs, but the only important bit is the 'texture information'. Basically what I'm trying to create is a little program that parses the text files and shows the user a list of every texture in that text file. The problem is, the strings denoting textures are not really easy to find, and I can't think of any sensible and fast way to get them...

[Code]...

View 12 Replies

VS 2005 Writing 4 Or More Strings To A Single Line In A Text File?

Sep 22, 2011

I've got my self in to a pickle here.I'm trying to do something I used to do in basic? At-least I think you can do this in Basic, you know Qbasic,What I'm trying to do is put 4-8 strings on to one line separated by a comma.Example might be:

writer.writeline (bob1, bob2, bob3, bob4) Out put might look like Test, Test2, Test3, Test4

I'm tried looking in to formatting of writeline/write, but I didn't get any where with it.

Also if this is possible- I would like to be able to read it just like :

reader.readline (Rbob1, Rbob2, Rbob3, Rbob4) If anyone cold just point me in the right direction, I'm sure I can figure it out - If not... Well I will ask another question.

View 4 Replies

VS 2005 : Create A Source To Get The Strings From The Text File Using ReadLine Method?

Aug 22, 2010

I need a bit of advice. I am working on my project with the listbox. I know how to create a source to get the strings from the text file using ReadLine method, but I have no idea how to split the strings in the text file by on the third commas and ignore the other strings while select with the matched strings on the listbox for each row.Here it is an example listbox Here it is an example items on the listbox

random item 1
random item 2
random item 3
random item 4
random item 5

And here it is an example text file.

example strings one, any strings 1, any random strings 1, other strings 1, final end of strings 1
example strings two, any strings 2, any random strings 2, other strings 2, final end of strings 2
example strings three, any strings 3, any random strings 3, other strings 3, final end of strings 3
example strings four, any strings 4, any random strings 4, other strings 4, final end of strings 4
example strings five, any strings 5, any random strings 5, other strings 5, final end of strings 5

The listbox is display the list of an example items, so if I select the "random item 1" item on the listbox, it read the strings through in the text file on the first line to get the strings on the third commas in the same line which it is (any random strings 1) to split it while ignore the other strings (other strings 1, final end of strings 1) that come fourth and fifth commas. So, if I select the "random item 2" item on the listbox, it read the the strings through in the text file on the second line to get the strings on the third commas in the same line which it is (any random strings 2) to split it while ignore the other strings (other strings 2, final end of strings 2) that come fourth and fifth commas and so on...That is what I am trying to achieve by select the each listbox item to get the correct strings for each line in the text file that come on the third commas while to ignore the other strings.

View 9 Replies

Text From A Notepad

Nov 4, 2005

when i click button1 i want it to read the text from a certain notepad and then put all the text from the notepad into a textbox, how?

View 16 Replies

Search Value Of Textbox In A Notepad (.txt) And Copy In A New Notepad?

Sep 14, 2011

I am trying to create a tool which I would input a word in a text box and it would search the path i give it to look for a word in a notepad file and copy the whole line to a new notepad and paste it.

i did this for now, i am able but i am able to copy all the text from the note pad and put it in a textbox for now..

Dim FILE_NAME As String = "P: est est.txt"
Dim objReader As New System.IO.StreamReader(FILE_NAME)
Dim TextLine As String

[Code].....

I am having trouble to get the command to ask them to go read the text file and copy only the line for the word I put in the input box and to put it in a new notepad.

View 2 Replies

Error When Opening Text File - FileNotFoundException Was Unhandled - Could Not Find File At Xxx

Feb 15, 2012

I have a program that can save user's input into a text file and load it back, but whenever I try to open the file and exit without selecting the file I get an error.(if i select the file and open it i don't get any errors).

This is the code that handles text file loading:
Private Sub Button4_Click(sender As System.Object, e As System.EventArgs) Handles Button4.Click
OpenFileDialog1.InitialDirectory = "C:"
OpenFileDialog1.Filter = "Text Files ONLY (*.txt) | *.txt"
OpenFileDialog1.ShowDialog()

[CODE]...

The error is :"FileNotFoundException was unhandled. Could not find file at xxx". also I would like to know how to make it so that the initial file name for file saving is today's date. I do not get any errors when I try to save the file.

View 7 Replies

File I/O And Registry :: Find/Extract String From A Text File?

Jun 7, 2011

I've got an application that passes commands to a terminal window and saves all the output to a text file Here is one of the commands my application passes to the terminal

MyProcess.StandardInput.WriteLine("host " + device)

The output of which is

"HostA has address Y.Y.Y.Y"

this along with a whole bunch of other text is saved to a text file...my question is how do I find the sting "HostA has address Y.Y.Y.Y" in that text file and then extract the IP address and assign it as a string variable?

View 12 Replies

How To Display Text In Notepad

Jul 13, 2009

I want to display a string (stored in a variable) in notepad(or any other default text editor depending upon the system). Saving to a text file is not necessary. I just want to open Notepad with an unsaved file containing the text.

View 1 Replies

Find Specific Text In Text File

Jan 3, 2012

I have a little question about txt-files...This is the case: I am going to make a small software for editing particular parts in text files, so you don't have to do it by hand. In this program, i need to find several words in a text file and retrieve the text or number that is after the the "="-sign, and then replace that info. Then, I want to use the information it retrieves to add some text in the end of the file.

P.S. There are 36 differet words to search for, and some of them will occur in several places, so i want the data from those words that occur several times in an array. And the data i want to retrieve is AFTER the searchword and a "=", so i dont want the searchword or the equals-sign included. Can someone explain to me how to do this?

View 6 Replies

Input Text In Notepad From An Application?

Apr 20, 2009

i have a form.. me.topmost=true on this form i have a few buttons with commands to enter text. how can i find the notepad.exe from my form and when i click a command button, it inputs it in the notepad, or any other application?just a squirrel looking for my nut...

View 4 Replies

Insert Text Into Notepad From VB Application?

Aug 24, 2009

how do insert text into notepad from my VB application?

View 7 Replies

File Access - When Open The File With Something Like Notepad, It Shows Random Ascii Chars?

Oct 19, 2011

Years ago when coding with VB6 and earlier, I used a file open command to create, read, and write a file that made it easy to store useful information.I believe it was binary and you wrote/read the data to a specific line in the file. When you opened the file with something like notepad, it just showed random ascii chars. When I needed a line of data, I could specify what line to load it from.

View 2 Replies

Open File - Launch A ReadMe.txt File In Notepad Thats In The Same Directory As My Application?

Jan 23, 2010

I get mixed results in Google, so I'm wondering how can I simply launch a ReadMe.txt file in Notepad thats in the same directory as my application?

View 1 Replies

Transfer All Data From An Excel File To A Notepad File With Comma Separator?

Apr 11, 2011

I have an excel file i want to copy all the row of that excel file into a .txt file.In the txt file the separator is comma.

View 8 Replies

Find A String Between Two Known Strings?

Mar 6, 2010


How can I find a string between two known strings like:

name=login value=12345 />

Now I need to get the string/the numbers between name=login value= and />
It's from a webpage so it has multiple lines.

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved