How do i re- arrange the 3 strings into 1 string into a new text file?
what i have in the text file:
VERSION 600
LIBRARY [2009/6/15 15:02:14, 2009/6/15 15:02:14] temp.gds
UNITS 0.001 1e-009
[Code]....
I have lines like this in my text file
T250
T169
T168
T170
T176
I want to arange this lines to be like this
T168
T169
T170
T176
T250
I want to arrange it in decending order.. Can we do this...
how can i save 2 textboxes(string) into 1 file? and when open the file, the string goes to definite texboxes...
[Code]...
I am doing a project for a college assignment and im stuck on the print section, i have alot done but I need it to be able to print out like the photo from the link below, but i have no idea how to change the code.[code]
View 7 RepliesI am reading a text file in which has three colums of information i.e.
00100 25690 21586
23510 25694 24856
25896 45478 52897
58745 59687 12364
I want to read the whole file, and split the colums so each set of numbers is put into an array to be used as an input for later. If the text file only contains one line of numbers like 00100 25690 21586, I have written a code to seperate those and put them into an array which is attached. If the text file contains more than one row of numbers I can read the whole file in line by line but I can't get the strings seperated.
[Code]...
I have a text file DIC.TXT.[code]...
View 4 RepliesI am trying to write login page code for the login button but can't find how to find a string in a .txt file. The only code I have managed to find on the subject is opening up the text file with the
FileOpen(1, "File location", OpenMode.Output) code, but even this would be best removed as it would open the text file containing all usernames and passwords within the file.I need the system to search for a specific string within a file ( Usernames___Passwords.txt (159bytes)Number of downloads: 134), and with that string find the password associated with it (in my attached example the letters/words after the apostrophe) but stopping at the end of the line.
I have a list of strings. For each string in that list, I want to prepend another string. I wrote a method to do it, but I was wondering if there was something already in .NET I could use to do this. It seems like something that could be built in, but I was not able to find anything.
Here is the method I wrote:
Private Function PrependToAllInList(ByRef inputList As List(Of String), ByRef prependString As String) As List(Of String)
Dim returnList As List(Of String) = New List(Of String)
For Each inputString As String In inputList
returnList.Add(String.Format("{0}{1}", prependString, inputString))
[code].....
It works, but I would rather use built in functions whenever possible.
I'll start off by saying I am using Visual Studio 2008 Standard. I am creating a program that will open installed programs using short code. For instance, if a user types in 'npp' then Notepad++ opens. I have it working just fine to respond to the predefined commands, but I would like to expand it so that the user can define their own settings simply by typing the program directory and the custom short code they want: Example: If I am an end user and would like to say define a short code for Windows Media Player, I would simply type the following: (Assuming Excel or likewise is used to open the csv file).
[Code]....
All I am doing is reading each txt file I find in a directory and finding certain strings in the text then counting how many I find in each file and then once each file has its separate counts it send it to a sql database. I have most of it done, but I cant seem to get the count to separate each file so my problem now is that it counts the first file but when it counts the next file it adds to the first file and so on through all the files
Imports System
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
[Code] .....
I am trying to parse a very large text file for certain strings. The text file is part of a level-making software for an old game I play. The text file basically contains all the information the level designer software needs, but the only important bit is the 'texture information'. Basically what I'm trying to create is a little program that parses the text files and shows the user a list of every texture in that text file. The problem is, the strings denoting textures are not really easy to find, and I can't think of any sensible and fast way to get them...
[Code]...
I've got my self in to a pickle here.I'm trying to do something I used to do in basic? At-least I think you can do this in Basic, you know Qbasic,What I'm trying to do is put 4-8 strings on to one line separated by a comma.Example might be:
writer.writeline (bob1, bob2, bob3, bob4) Out put might look like Test, Test2, Test3, Test4
I'm tried looking in to formatting of writeline/write, but I didn't get any where with it.
Also if this is possible- I would like to be able to read it just like :
reader.readline (Rbob1, Rbob2, Rbob3, Rbob4) If anyone cold just point me in the right direction, I'm sure I can figure it out - If not... Well I will ask another question.
I'm trying to convert a DTS package to an SSIS Package. My package contains a Data Flow task that pumps data from an OLE DB connection to a Flat File destination.The data in the flat file needs to be arranged in a certain way (eg: spacing), So how do I do that? Is there any data trasformation tool that will help me achieve this? If so how would it be done?THE DTS CODE (to put things in perspective)
sLineItem = Space(10)
sLineItem = sLineItem & Space(10)
sLineItem = sLineItem & Space(10)[code].....
I need a bit of advice. I am working on my project with the listbox. I know how to create a source to get the strings from the text file using ReadLine method, but I have no idea how to split the strings in the text file by on the third commas and ignore the other strings while select with the matched strings on the listbox for each row.Here it is an example listbox Here it is an example items on the listbox
random item 1
random item 2
random item 3
random item 4
random item 5
And here it is an example text file.
example strings one, any strings 1, any random strings 1, other strings 1, final end of strings 1
example strings two, any strings 2, any random strings 2, other strings 2, final end of strings 2
example strings three, any strings 3, any random strings 3, other strings 3, final end of strings 3
example strings four, any strings 4, any random strings 4, other strings 4, final end of strings 4
example strings five, any strings 5, any random strings 5, other strings 5, final end of strings 5
The listbox is display the list of an example items, so if I select the "random item 1" item on the listbox, it read the strings through in the text file on the first line to get the strings on the third commas in the same line which it is (any random strings 1) to split it while ignore the other strings (other strings 1, final end of strings 1) that come fourth and fifth commas. So, if I select the "random item 2" item on the listbox, it read the the strings through in the text file on the second line to get the strings on the third commas in the same line which it is (any random strings 2) to split it while ignore the other strings (other strings 2, final end of strings 2) that come fourth and fifth commas and so on...That is what I am trying to achieve by select the each listbox item to get the correct strings for each line in the text file that come on the third commas while to ignore the other strings.
Here's the weird problem I am trying to solve but cannot get my mind around it. In a text box 1, the user enters 2 or more strings separated by comma. then in text box 2, the user enter 1 or more strings separated by comma. The output then puts the strings from text box 2 between the strings in text box 1
Example:
TextBox1 = visual basic, java, perl
TextBox2 = is better, compared to
[Code]...
These is the content of my txt file which is saved in D drive in my pc abc,1,2,3..I tried the flowing but it didn't work:[code]I am getting error on this line.. data = line.Split(","c)...it says this line isn't in use anymore or something and that I rather use LineInput but thats asks for filenumber and i don't know what that is. I am sorry but I am a complete beginner. what else can I try? [code]ok that error is gone now but now if I want to add these values to a list box..how can i do that?
View 1 Repliesi have a string with the value = "/var/mobile/Media/iTunes_Control/Music/" i need to read the next 13 letter after this string in a text file i am also using a loop to do this multiple times
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Header As String = "/var/mobile/Media/iTunes_Control/Music/"
[Code].....
Say I have a List(Of Tag) with Tag being an object. One member of Tag, Tag.Description, is a string, and I want to make a comma-separated concatenation of the Description members.Is there an easier way to do this than to read the Description members into a List(Of String) and then use the Join function?
View 2 RepliesI have a label that reads a random line from a text file and that string becomes the text for the label.
Now the problem; the label will only work if it is clicked because the event handler is click.What I need is this to work automatically at startup. In other words, it should change the label's text to the random string of the text file on startup of the application.
Here is my code.[code..]
How would I go about replacing a portion of text in a text file with a string?
View 1 RepliesI've got an application that passes commands to a terminal window and saves all the output to a text file Here is one of the commands my application passes to the terminal
MyProcess.StandardInput.WriteLine("host " + device)
The output of which is
"HostA has address Y.Y.Y.Y"
this along with a whole bunch of other text is saved to a text file...my question is how do I find the sting "HostA has address Y.Y.Y.Y" in that text file and then extract the IP address and assign it as a string variable?
i am working on a project to extract all md5 hash from a text file;btw i don't mean the text file hash i talking abt the hash string inside the file?
View 3 RepliesI have a large piece of text in which there is something simular to this:!#_KT_#!COMMANDHERE!#_KT_#!I want, in VB.Net, to get the 'COMMANDHERE' part of the string, how would I go about doing this? I have this so far:
Dim temp As String = WebBrowser1.Document.Body.ToString
Dim startIndex As Integer = temp.IndexOf("!#__KT__#!") + 1
Dim endIndex As Integer = temp.IndexOf("!#__KT__#!", startIndex)
[code]....
I am trying to take one string that is too long for it's container, so it wraps, and break the string at the wrap into two strings. So say I have this string
"this is a
string"
I would like to make this into: "this is a" - "string", two different strings. But I will not know where the break is..
How do I CONT the words seperated by commas in a string. [code] But how would i get the count, i DONT want the actual text
View 10 RepliesI must input a letter and a number in a text box.. say "A14", and them I want to cut the string into "A" and "14" and then use these, but I do not know how to code this as the next string could be "A1" or "C110" and these change... could I make an if for each one? like an if for when its 2 characters and just cut it in half and then an if when its 3 characters and cut between the 1st and second and so on?
View 4 Replies
How can I find a string between two known strings like:
name=login value=12345 />
Now I need to get the string/the numbers between name=login value= and />
It's from a webpage so it has multiple lines.
I have a string in which if the string "<error" appears (as part of a larger string which would look something like this
" <error code="200">Current security level not high enough.</error>"), it finds what the code equals (in this case 200) and the message which appears between the pointy brackets (in this case "Current security level not high enough.").[code]...
I am trying to take a value from an html file. I know what code will be around the value. So I want to split the html doc with these values so I can get the value between them.
For example:
<h4>Availability</h4>
<p>
<b>Availability</b>: VALUE IS HERE <br />
</p>
[Code]....
I have a string, and I want to search it for multiple strings, which I basically want to use for searching for urls in an HTML file that's been loaded into a string.
so get the value of everything between
href="http:// and the next " and return it (I want to check each one separately and do different things with them, so maybe add them to an array that I can loop through?)
preferably simple short code than highly functioning code