Make Result As An Decimal?
Jun 22, 2010Public Class Form1[code]...
I would like the "Percent" result to come out as 37.50%
Public Class Form1[code]...
I would like the "Percent" result to come out as 37.50%
I am encountering the following issue So i have a device that sends stuff at the serial port, i then parse it and put it into an array of bytes like that:
Dim HCI_Command_Rcvd_Byte() As Byte All good till here What i wanna do is make an array and put this result every time the serial port gives me a new result, for example:
[Code]...
Basically what i wanna do is let the port parse the messages, fill in the array with the result at an empty spot in this array and then i will have a separate thread that will look in into this array in each non empty space and after it looks into the non empty space it will use or discard the info and also mark this space as empty (after it checked)
correct syntax to format decimals. I want 2 decimal places even if the result is an even number i.e. I want 40 to show as 40.00 and 40.6666667 to show as 40.67.
View 8 RepliesI'm very new to VB 2008 and I need to round the result of a calculation to three decimal places after using a button click to complete the calculation. I've tried the Round function to no avail.
View 16 RepliesHow can i format a decimal result to a string without the .00 suffix?
View 7 RepliesPublic Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
The end result is baffling me here are 2 examples when I debug
Mine: 640.1 * 49 = 31364.9
Debugger: 640.1 * 49 = 31360 ( not right needs to show the correct decimal )
Mine: .775 * 3 = 2.325
Debugger: .775 * 3 = 2.325 ( shows it perfectly???)
I'm trying to do this division and the result to be displayed on a eight decimal number.
Dim r1 As Integer
Dim r2 As Double
r1 = Val(TextBox16.Text)
r2 = r1 / 60
TextBox18.Text = FormatNumber(r2, 8)
The value or R1 on this case is 273.4 but it varies according with the result obtained so I can not allocate a constant number to r1. The problem is the result that I am getting is 4,55000000 instead of 4.5566666
What is the cleanest, most readable way to String.Format a decimal with the following criteria
start with a sign symbol (+ or -)
a fixed number of fraction digits
no decimal separator
right aligned
pre-padded with "0"'s
the problem is about user when click button coin and it will display the decimal number and suppose to be like this : 0.10 also , i have made code about notes amount like RM 1.00 and RM 5.00. [code] the problem is when i run the program and click the button it become like this: RM 1.2 not RM 1.20.i also attach some pic in the first pic the coin appear normally but after i click button RM 1.00 , it become like second pic.
View 3 RepliesI have a problem regarding the number and want the number become from this: RM 2 to be like this: RM 2.00 [code]...
View 3 RepliesI am started learning .net. I want two decimal points value. I have used this codelblNo.Text = Math.Round(CDec(txtNo.Text + (txtNo.Text * 0.2)), 2).ToString(If i have value as 1.32 then its ok but if i have value like 2.3 it shows 2.3 but i want value as 2.30
View 4 RepliesThe Quiz is timed. Its result is in "m:s" format. How to make this result permanent, i.e. when the game is restarted the results would still be there?[cod]e...
View 5 RepliesMake a Quiz result sortable? Option Strict On[code]...
View 2 RepliesI input a value with decimal numbers in textbox to save a records in access..when i try to open an access, and it's value is whole number...
View 4 Repliesif you want to make program to calculate the result of brackets math question , as 6+(9+(5-(1+(2+1)))) , and you made 2 buttons representing ")" and "(" , and you want when the user clicks on the "(" button it just applies that the number before it to be stored in a place like a label such that the program calculates numbers after it and then calculate the produced number and the label number , something will disallow you that the questions with many brackets as the mentioned one above 6+(9+(5-(1+(2+1)))) will for example store 6 and plus sign in a label but after that 6 will be placed by 9 because there is another bracket after 9 , so the question will be calculated false , more clarification for my question is the way brackets are made in the windows calculator so i want a coding idea to make the brackets like in the windows calculator
View 5 RepliesCurrently I'm doing a resistance calculator. If i got 3 combo boxes which let user to choose the color code of a resistor, how to make the resistance of the resistor(resistance after count according to the color code choose by the user) go into a listbox after click "Enter" button? And also initialise the color code choose by user just now and the resistance after count.
View 2 Replieshow can i make hexa decimal string from my own text? [code] then it will generate hexa string (below is only sample, not true generated) 3F2504E0-4F89-11D3-9A0C-0305E82C3301...is it some algorithm or function in VB NET to generate HEXA?
View 1 RepliesI am using Visual Basic Express. Here is my code but my number is always a whole number when I divide I want it to be two decimal places. For example 367/12 should equal 30.42 not just 30.
[Code]...
how do you convert a decimal ( decimal place holder = dot) to a decimal (decimal place holder =comma)?
View 6 RepliesIs there a way to make NumericUpDown control hide decimal places but still can show if i entered manually?For example, i want to set NumericUpDown DecimalPlaces to 0 but when i enter something like 6.52, it remains 6.52 and not rounded to 7.
View 2 RepliesI am currently having a headache on how to solve this problem that i am facing. here is the situation: I have a combobox and a list box on the main form. The combobox will get the data from the ms access database. In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987 So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown. But now, when i do a single click on the date, one result will be shown. That is correct. But the problem is when i click on the same date again, three of the same results will be shown on the list box. that is it will display : 13/04/1987 13/04/1987 13/04/1987 which is not the case. Then it will show more duplicates of the same results if i click more times on the same date which should not be the case.
Dim n As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
[code].....
I am using a datagrid in my where i am having four columns. In first column the parameter values are entered and in the second column measured value is entered and in third column the nominal value is entered.Inthe fourth column the result is displayed by subtracting the measured value and nominal values. I am doing this calculation in Datagrid cell validated event. What i want is,there will be many rows in the grid,when typing the value in the third column the corresponding result will be displayedin the rowof theresult column,save button will be displayed while the form loads,when the calculate part is completed that is there should not any cell of the resut column empty then i should enable the save butto.
View 2 RepliesOdbcDataReader in showing decimal fields Decimal separator disappear with DB2 dsn
View 3 RepliesAfter converting all degrees-->decimal, and decimal-->hours, how can i use Tan, Cos and Sin formula in vb.net? I want the user must enter an input (which it is a coordinat-->i already convert the degrees-->decimal value as suggested by stanav and paul.
The questions like this (i only calculate on paper but dont know how to implement in code):
Input user need to enter:
-latitude local (e.g. 1.4875)
-longitude local (e.g. 103.3883333)
[CODE]...
My user requests to change the . on the numpad to a when entering text in a multiline textbox.So I was thinking about the KeyDown event.To determine if the numpad . was pressed I can do something like this [code]But now how do I change the returned charachter as a , ? All e.Key... properties are ReadOnly. The KeyPress events let me change this by providing e.KeyChar, but in that event I can't check for the numpad .
View 2 RepliesHow would I go about rounding up decimal numbers to the nearest 2 decimal places? For example $7.0000032 would be $7.01 In theory, VB would make it $7.00 but if it is > $7.00, I want it to reflect that to the nearest penny... so $3.0000001 would be $3.01
View 5 RepliesI just read about DataSet in VB.NET, it uses disconnected concept. My question is: if my apps has "List All" button that query data from 1 table in the database, and that table has "very very very" many rows, so my DataSet will be filled with those data and eat up memory. Can I limit the data that being put to the DataSet from that query? But I want to be able to retrieve the next data from the same query if the user want to see it?
For example:
I have 1000 rows in my database, and i query all of them. But I just want 200 rows being inserted to my DataSet, but if the user want to see rows number 201 and so on, I want to be able to retrieve the next 200 rows, and so on. So it just like cutting those data into a group of 200 rows. Can I do this with the concept of "disconnected" of the DataSet?
If I have the code:Dim x as Decimal = 100.0m
Is it casting from a double to a decimal implicitly. How would I do this explicitly in vb.net?
1) One Decimal Varibale stores a decimal value
2) The value must be converted in string ( some time the comma is used as decimalplaceholder some time the dot)
3) the user modifies the value
4) i need to riconvert the string back in decimal
how can i do this
so:
Variable 123.34D ----> textBox 123,34 or 123.34 -----> variable 123.34D
I have the following structure:OLD: frmMain (WinForm)uscStat (UserControl with Grid) In frmMain I'm able to make some settings and load the result of the settings via LinQ into the Grid of the uscStat.
[Code]...