I have created a windows application and it was working fine, then I added in the printform component from PowerPack3 and here the error starts. The application works fine on the computer I wrote it on, but when I move the exe over to another computer (which I have installed PP3 and the .net framework) I get an error. The only difference between the computer I am writing it on and trying to run it on, is that this computer has vb.net 2010 express edition installed. What do I need to do from here to get this working?
i used printForm to print forms, but when i installed the powerpack 3.0 it doesn't work anymore.i am always getting an error "PrintForm is ambiguous in the namespace 'Microsoft.VisualBasic.PowerPacks.Printing'" i am using visual studio 2008 professional edition.
I'm have a program filled with forms for the user to enter data to determine fluid and reservoir properties. I want the ability to be able to print out the forms so they may be kept in binders. I'm using the PrintForm function from the Visual Basic PowerPacks but I'm having a problem getting some of the larger forms onto a single page. Is there anyway to zoom or autofit using this function? I've already tried adjusting the margins and that is not enough. I've been trying to look through the object browser but it hasn't worked very well yet.
I have a form which i need to print, however, I need to know how to format it, margins, etc... I've got it to work by adding the PrintForm powerpack and using the simple code below, but the margins are too big and it is not printing the rich text box I have.[code]....
Right now, I have a PrintForm dragged onto the screen and it's named PrintForm1. I need to print this form in landscape mode so it fits all in one page.Here is the code I am currently using to print:
Private Sub Print_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Print.Click PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.CompatibleModeFullWindow) End Sub
I'm tired of having my dropdownmenu come up in my printpreview and print, so I've decided to use a timer and a progress bar to wait a few seconds before the print or printpreview is started.[code]The problem I have is when I go to print or printpreview, it will work but the program stops debugging and tells me that the form has to be focused. What up with dat?
If i draw a printform into my form from Visualbsic. poerpacks toll box then i get two errors:Error 1 'PrintForm' is ambiguous in the namespace 'Microsoft.VisualBasic.PowerPacks.Printing'. C:UsersAlvinDocumentsVisual Studio 2008Projects[code]....
When click on this error i Get: Me.PrintForm1 = New Microsoft.VisualBasic.PowerPacks.Printing.PrintForm(Me.components)
Second error
Error:PrintForm' is ambiguous in the namespace 'Microsoft.VisualBasic.PowerPacks.Printing'. C:UsersAlvinDocumentsVisual Studio 2008Projects isskov calculator[code].....
I have form with text boxes that are collecting data from access database.Now I want to print this, but selectively.I know how to print whole form using PrintForm PowerPack. But I want to print only labels and text from text box.
I have a form that I am using "PrintForm" to print out, however there is a notes section that can contain a lot of text, seeing as the Printform function only takes a bitmap of the form, it cuts off the text. I have another function that will print the contents of a textbox - I'd like to display this below the bitmap.
First is the code for printing the bitmap - second the textbox
PrintForm1.PrinterSettings.DefaultPageSettings.Margins = New System.Drawing.Printing.Margins(0, 0, 0, 0) PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable)
I try to use printForm from powerpack , but is doesnot have fit size function. I use the following code to print , using setResolution to set the size to fit A4 paper. But I cannot print the scrollable area. 1) If using such approach, how can I print scrollable area2) With PageSetupDiaDialog, how can i set to default orientation to Landscape. I use pageSetupDialog.PageSetting.Landscapte = true, but there is error when it runs
Public Function calculatePrintPageNumber(ByVal form As Form, ByVal panelsize As Size) As Int32 Dim panelHeight As Integer = panelsize.Height Dim formHeight As Integer = form.Height Return System.Math. Abs(formHeight[code]....
I would like to be able to print 3 pictures that go on an 81/2 x 11 paper vertically with 3 corresponding labelsI currently just use power packs to print screen image of my forms, but for this it wont work because the maximum size i can set the form 1036/780 is only about 2/3 the size of the 81/2 x 11 sheet of paper
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click Dim PDFFileName, PDFTest As String Dim PDFNameLength, SlashLocator As Integer
I am creating a program that I would like to distribute. I am using printform in VB 2008 to print my form. My form is the size of my computer screen...15 in. If the program is run on a different computer with a different screen size, will it affect the appearance of the form on the screen or the printing of the form? If the form is run on a laptop, for example, with a smaller screen, will it cut off my form and thus cut off the form during printing? Will a bigger screen increase the size of the form and not allow it to fit correctly when printed? I was just curious and wondering.
I am printing my form by using the printdocument of VS and the printform found in powerpacks. I never got the preview to work so when ever I want to print I send my information on a new form (form1) which I have altered ( colour borders ) so it is printable. To print form1 I have added a toolstrip with a print button so when the user sees all is ok on the form1 he clicks on it which hides the toolstrip and prints form1. All this sequence works fine. The problem I have been getting lately is that I can print on the first try but when I call another form to print the toolstrip ( with the print button ) is always hidden. I have to exit the application and re enter to get it to show up. Any solution to this or even how to print in a better way. (have the preview to work for example ). I have tried to use printdialog to print but I have never been able to send the document to print.
I'm trying to use PrintToFile from the Power Packs PrintForm Class and I have a question. I'm able to save the form to a file, but now how to print it later if needed. MSDN says that it's saved as an Encapsulated PostScript file. Adobe Illustrator claims it will open EPS file, but it won't open this one. How I can print this file in vb.net? If you've never used this before, here is my sample code to save the form to file in case someone wants to test it out.
If SaveFileDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then Me.PrintForm1.PrintFileName = SaveFileDialog1.FileName & ".eps"Me.PrintForm1.PrintAction = Printing.PrintAction.PrintToFile Me.PrintForm1.Print(Me,PowerPacks.Printing.PrintForm.PrintOption.Scrollable) End If
I have created a form that we use for our employee goal setting. I would like to let the users print the form. The form is quite large and has scroll bars. I am trying to use the Printform to print the form. I would like to use autofit or some other type of scaling to get the form to fit on one page. I have done some looking aroung and have seen the following instrutions a couple of times.
1.Drag a PrintForm component onto the Form from the Visual Studio Toolbox
2.Set the PrintForm.BodyContainer property to reference your Form
3.Drag a PrintPreviewDialog component onto your Form from the Visual Studio Toolbox
4.Set the PrintPreviewDialog.Document property to reference the PrintForm component
5.Add a button and button click handler. In the handler call PrintPreviewDialog.ShowDialog()
I don't know how to set the PrintForm.BodyContainer propery (number 2). I am using Visual Basic 2010 express.
I'm using PrintForm which comes with PowerPack to print a form with a couple of Labels into it.But the letters appear a little blur and not clear at all, bad quality, I tried by increasing the size of the labels but the result was the same.Under the PrintForm parameters I only found one that could be relevant, the papersize but that doesn't helped too.
When I call PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable)Only the visible portion of the screen is printed.What else do I need to dobill
I have a Bindingnavigator on my form and is using Printform. Problem is whenever I execute Printform.print() only the 1st record is shown. How do I print the other records? How can I do a Print All?
i am working on Scrollable form, when i am trying to print this form with PrintForm object its printing only the showing part not all the form this the code which am using. Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click Me.PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable) End Sub
I have a PrintForm component on my form and I am trying to send the currently active tab page to the print form and then send it to the appropriate dialog. However, I keep getting the document contains no images. Any ideas how I pass the tab page to the print form component?
I have a project that reference from leadtools 16.5, and after that, i want to run my project..i see am error like it " An error occurred creating the form. See Exception.InnerException for details. The error is: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. im using vb 2008 pro
I'm using Visual Studio Development Server (Visual Basic 2010) and it works fine. Now I've enabled NTLM Authorization because I want to test the website using a different user account. Now when I try to access the website I always get the following error page:
Server Error in '/' Application.
HTTP Error 403 - Forbidden.
Version Information: ASP.NET Development Server 10.0.0.0 .I'm using a test account which is a normal user within our domain. I've already set the access rights in my project folder to Full Access for this user but it does not help.
When I deployed my project on a server, in certain circumstances, I get an error page that indicates I should create a custom error page. I was wondering how exactly I would implement this custom error page the server asks for to give me a precise and helpful message or preferably, how I would get the error to just display on the main page?This is the error message I got below
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
I try to compile a project with msbuild.exe I have this error :
vbc : error BC30136: Error creating Win32 resources: Error reading icon '"Recycle Bin Empty.ico"' -- The filename, directory name, or volume label syntax is incorrect.
This icon is the Application icon which is in the same directory of the project.vbc is started with /win32icon:"Recycle Bin Empty.ico" parameter.Don't know why MSBuild can't reach the file.
AnonymousPathAnonymized.vb : error BC30037: Character is not valid. AnonymousPathAnonymized.vb(2) : error BC30627: 'Option' statements must precede any declarations or 'Imports' statements.
This error first appear to occur randomly. Steps to recreate:Open Visual Studio and load a solution (some files automatically opened) - this is when the problem occurs Close all open files Restart visual studio and load solution (no issues)Open Exactly the same files again, restart visual studio and load solution so files open automatically (problem occurs!)
However, when trying to narrow it down to a single file (that is automatically opened when the solution is loaded), I couldn't reproduce the problem. Now with all the files open again the problem doesn't occur!!! So it looks like it is fixed - though this happened before and eventually the issue came back.
I think it is to do with one of the user controls with DevExpress controls on it - when the error occurs, the designer displays the error. Though I can't reproduce it at the moment to confirm that.
I got a serious problem. Though I have made my program newly it shows error. I have used 1280,1024 animation only for first form then used 1280,1024 image for every form. Today I was checking then it was showing me error message for 19th & 20th form. If I use On Error Resume Next then it shows error for another form ; if I use same code there in the menu item I mean so that I can get rid of error when I click to show a form it shows another error. First error message is "InvalidOperationException was unhandeled An error occurred creating the form. See Exception.InnerException for details. The error is parameter is not valid." and second error is "OutofMemoryException was unhandled Exception of type 'System.OutOfMemoryException' was thrown". I have noticed it that it doesnt show error message for those form which have few labels and text boxes. It shows error message for those forms which have 1 menu bar, 2 picture boxes(one is 1280,1024 & another is 250,456), 2 group boxes, 40 labels, 3 combo boxes, 38 text boxes & three buttons. Please help me I need to get rid of this problem. Does it mean that I cant use unlimited control there in my form?
I have the following Stored Procedures create or replace PROCEDURE WEB_AC
[Code]...
First one: At some point in the application I have the valor parameter (of the visual Basic Function) as a string with spaces that is something like "some string with spaces". When this happens, the stored procedure don't update the table. If I execute the SP directly in the DB (with SQL Developer) all works fine. I know it has something to do with the string missing some quotes(') but I haven't make it work yet. Some ideas on this?
Second problem: Sometimes, when debuging the application, if I interrupt the execution, I start getting the ORA-24338 'statement handle not executed' error for hours every time I try to execute it again. I believe it has something to do with an open transaction. But honestly, as I'm new in working with Oracle, I really have no idea what the problem could be.
