Programmatically Display A Tab Page?
Feb 16, 2012
I have a tab control with 4 tabs. At form load time I determine which tab I need to have the focus (which one to select). I have tried using TabControl.TabIndex = 2 to set the desired index and TabControl.SelectedTab = TabControl.TabPages(2) as well as TabControl.SelectTab(SoftwareUpdateTabPage), however, none of these seem to work at load time. The tab enter of the first tab always seems to be called. Is there a way for me to select the tab I want in my form load function?
The second part is how do I disable (so the user cannot change to another tab) the other tabs at form load time?
View 15 Replies
ADVERTISEMENT
Aug 8, 2011
in datagridview, how do I go to last page and last row programmatically?
I tried below, but it does not work:
Tried 1:
dgv.FirstDisplayedScrollingRowIndex = dgv.RowCount - 1;
dgv.ClearSelection();
dgv.Rows[dgv.Rows.Count - 1].Selected = true
[Code].....
View 6 Replies
Apr 1, 2009
in datagridview, how do I go to last page and last row programmatically?I tried below, but it does not work:Tried 1:
dgv.FirstDisplayedScrollingRowIndex = dgv.RowCount - 1;
dgv.ClearSelection();
dgv.Rows[dgv.Rows.Count - 1].Selected = true
[code].....
View 6 Replies
Mar 9, 2010
I have a aspx page, in that page i have an Iframe. In the Iframe i do some stuff in code behind and when it is done I would like to do a postback from the aspx. In other words, Is it possible to do a postback programatically from the code behind of the iframe to the parent page?
View 4 Replies
May 20, 2012
I am able to insert a textbox into a Word document using the below code:
Dim opProcedures As Word.Shape
opProcedures = oDoc.Shapes.AddTextbox(Microsoft.Office.Core.MsoTextOrientation.msoTextOrientationHorizontal, 0, 0, 456.75, 24.75)
opProcedures.TextFrame.TextRange.Text = "Operational Procedures"
This adds a textbox to the first page of the document however even when I change the first (top) parameter I am unable to move the textbox onto the second page (only lower down onto the 1st page, any greater values than the height of the first page an it disappears).
How can I get the textbox to appear on the 2nd page of the document?
View 1 Replies
Jul 8, 2009
I'm designing a program using VS.NET 2008 and Crystal Reports 2008, and I want to give the user the option to set how many groups per page is viewed. I know I can do it using the Group Expert, but is it possible to set it programmatically in VS.NET?
View 1 Replies
Jun 30, 2009
If a user navigates to my webpage how can I programmatically determine they are accessing my page from within the Intranet? (Not interested in NTLM or Windows forms authentication. Need a programmatic method.)
View 2 Replies
Sep 28, 2010
I am attempting to use the VB.Net Excel COM interop to programmatically change the location of the first horizontal page break on an Excel spreadsheet being generated by the program. Code to do so is as follows:
Dim range As Excel.Range
xlActualWS.Activate()
xlActualWS.PageSetup.PrintArea = "$A$1:$K$68"
[code].....
View 1 Replies
Mar 7, 2009
Visual Studio 2003 VB.net Windows Application.I have a Form that shows a .chm Help File when F1 is 'clicked'.The Help Display can be closed in the normal(?) way by clicking its Close Button.However, I would also like to be able to close the Help Display when, for example, the Form is 'Reset'.Is there some way to close a Help Display programmatically
View 4 Replies
Feb 12, 2012
I have my list box items displayed in the listbox. When I selected one of the items in the list box, related records have to be displayed in datagrid.
View 2 Replies
Dec 1, 2011
I want to generate a one page report from the database e.g. a school report, and then dispay results on a document viewer or similar, for easy scrolling. The report page has controls such as the stackpanel or grid. Is this possible? How? Any alternative approach
View 1 Replies
Sep 1, 2010
I want to launch an instance of InternetExplorer from my application. I also need to modify contents of specific web pages before the pages are displayed based on user settings (e.g., bold certain phrases within the page and/or include user-specific data on the page).
Public WithEvents IE As SHDocVw.InternetExplorer
Public Sub ShowIE()
Me.IE = DirectCast(Microsoft.VisualBasic.CreateObject("InternetExplorer.Application"), SHDocVw.InternetExplorer)
Me.IE.Visible = True
End Sub
[code]....
View 3 Replies
Feb 5, 2009
I make a panel visible that has a tab control on it.
The panel becomes visible - I can see all three tab pages.
But the contents of the tab page is blank - until I actually click a tab heading.
View 4 Replies
Jun 8, 2009
I'm running:
a)Vista 64BIT and UAC is turned off with IE8 and
b)Win XP 32 bit with IE 6
Under b) I can display a specific webpage (which includes som JS and Ajax) without any problems Under a) I can't display the page
Are there any known security issues? Do I enable some security settings within Vista or IE8?
View 2 Replies
Nov 10, 2010
I am just making the switch from WebForms to MVC and would like to ask what are the best ways of hiding particular fields in the view. Assuming we have a model named WishList that has a list of gifts kids want for Christmas and the child's name. We want the elves to view the list of gifts, but only Santa Claus can view the child's name. Would it be best to have two views for the WishList (one for Santa and one for the elves) or is there another way to handle this? My concern is that the number of views can start piling as high as the snow does in the North Pole by the time I enforce all of the visibility settings required in my application.
View 1 Replies
Jun 8, 2011
i am designing sites in sharepoint 2010 and i need to use the javascript in vb.net and how to display an alert message in a web page using vb.net!?!
View 1 Replies
Aug 17, 2011
I have created a windows form application which goes through Internet Explorer index.dat files and extracts various information (URL's , date they were last accessed etc). I then display this information in a data grid view. From here i would like to be able to click on a URL link and open the web page without activating any active content (such as java script, activex, viruses etc). I have tried to do this using Internet explorer in 'offline mode' with the problem being if the web page requires an online connection it automatically changes Internet Explorer from 'work offline' to online mode. Is there a way around this problem? Or does anyone have any suggestions on a better way to view the web pages with no active content?
View 2 Replies
Apr 3, 2009
A few years ago, I remember seeing an MS Access application where the programmer displayed the first page of a Word document as a thumbnail on a form. I'm guessing that its highly possible that this is well within the limits of .NET - could anybody point me in the right direction to read-up on how I might do this?
View 5 Replies
Oct 12, 2011
Using a session variable in my VB.net site has been figured out just fine. I just need to get my welcome message to stay put on every page. I put the code and text box in my master page to allow the message to stay there, but my label with the user's name disappears when I click on a different page.
The session is still there because I have it set up to display the textbox to enter your code if the session is destroyed or not available for some reason.
my code is not allowing the First_Name and Last_Name of the user's session to show up? The problem is in the Page_Load but I thought I would throw in the whole master.vb file to show everything I have so far.
Partial Class MasterPage
Inherits System.Web.UI.MasterPage
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code].....
View 1 Replies
Nov 25, 2010
I'm using windows server 2008 & IIS 7.0 to deploy the my vb.net 3.5 application. I'm successfully able to run the URL on my server.Same URL having IP address & port number configured is not working on client system.
It is showing IE default error message as "page cannot display"
View 1 Replies
Apr 15, 2011
I have a banner ad on my site, using an asp.net Image control. I want to display a new ad every time the page is refreshed.
View 1 Replies
Feb 13, 2011
how do you display a webcam property page with avicap32? I am sending this message SendMessage(hHwnd, WM_CAP_EDIT_COPY, 0, 0) but the windows does not open
View 1 Replies
Feb 21, 2012
I have a page that allows users to "upload" a file. The page includes an asp.net fileUpload control. However, all it does is send the byte array to a WSE 2.0 web service. I can't change this. This may be updated in the future, but for now, this is what I have to go with.The page has an animated gif that starts when the user clicks the submit button. And the page should be updated accordingly based on the result returned by the web service call. I'm able to start the gif and consume the WS successfully. However, while the page is hitting the web service, the gif file freezes.
I then tried to use a separate thread to consume the web service. This speeds up the process and does not freeze the gif, but the page is not updated when the web service completes. If I put the main thread to sleep, the page updates, but I'm back to the same issue mentioned above, where the gif freezes. I'm pretty sure I could make the call using javascript and update the page that way, but at this point, I'd really rather do it server side (out of stubbornness if nothing else).
View 2 Replies
Jun 6, 2011
I have a working code that exports the datagrid into XLS. However, the datagrid results does not show on my aspx (html) page. It only shows on the page when I comment out the part that exports it to xls. I am not sure whether it should show by default when exporting.Basically, what I want to have is when I click my export button, it should display the datagrid on the page as well as popup an excel "open, save, cancel" window for the export.
Here is my function for referece:
Public Sub Convert(ByVal ds As DataSet, ByVal Response As HttpResponse)
Dim attachment As String = "attachment; filename= ExportPRFs_" & Today() & ".xls"
[code].....
View 3 Replies
Nov 24, 2009
In my database table I have a varbinary field that holds PDF documents. I would like to have an aspx page where I can build in a frame or content placeholder where the content of the PDF is embedded in the page.
View 1 Replies
Oct 17, 2010
I'm trying to display the tile of a web page when opened in the web browser on my for I'm using the code Me.text = browserwindow.documenttile..But this just displays the title from the previous file even though I run this after loading the new file
View 2 Replies
May 22, 2011
Here is the code that I am trying to use but it doesn't seem to do anything really.
Got any ideas on how I can do this?
Private Sub WebBrowser1_DocumentCompleted(ByVal sender As System.Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs) Handles WebBrowser1.DocumentCompleted
Dim allelements As HtmlElementCollection = WebBrowser1.Document.All
For Each webpageelement As HtmlElement In allelements
If webpageelement.InnerText = ("Username") Then
[Code]...
View 6 Replies
Sep 6, 2010
I am using VB 2008.I've successfully "scraped" web sites before but I am having a problem now.I use a web browser component.I retrieve the test from the control and then I search the text for the information I am looking for.BUT, when I try to do this a website that displays its information in FRAMES, it does not work.The web browser correctly displays the page, but the text only includes text saying that I need to use a browser that can handle frames.I do not understand how the web browser control can correctly display the web page (including the info that I am looking for, but the text/source/document property of the web browser does not include all of the text on the page.
View 6 Replies
Feb 21, 2011
I used this code to duplicate the contents of the tab.
Private
Sub
Form1_Load(ByVal
sender As
[code]...
But I want the tabpage to display the title of the site?
View 12 Replies
Jun 15, 2010
I have a class and I am trying to randomly select 3 items to display on a page (each item should be unique so that there is no repeating).I have some code that works(ish). The problem is that when I track the random numbers it takes about at least 50 attempts for the application to select a different random number than the one that was chosen the first time (defying the laws of probability).[code]
View 3 Replies
