SQLServer To DataAdapter To DataGridView Causing Memory Loss?
Aug 26, 2010
I have an application putting new data into a database so I want to use a DataGridView to display the data. I have a timer triggering every 5 seconds and running this UpdateGridFromDatabase() routine every cycle.
It works, but I can see my application memory usage going up by 10kB every 5 seconds until my computer with 6GB of RAm & 64 bit Windows 7 grinds to a halt! Can anyone see at a glance what I am doing wrong? I am trying to open & close everything as necessary. I have also dimmed two variables outside - I had then inside previously and it didn't make any difference.
View 3 Replies
ADVERTISEMENT
Dec 5, 2011
I managed to get a program I made up and running fine, but i noticed it has a small memory leak somewhere. I looked through the code and I think its coming from somewhere in this
vb
Private Sub Button4_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
[code].....
View 2 Replies
Nov 2, 2010
I'm currently testing an application that I've just finished developing and i seem to have a memory leak problem that i can't figure out. If i left open Windows Task Manager i can see that the process WMIService.exe is constantly taking more and more
memory. Starting from 40 000K, it was at 590 000K after 5 days.I was able to figure out which part of the application is causing me problem. So i've made a smaller application to figure out the problem but i just can't find the problem. Here is the code:
Private Sub WmiStartToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles WmiStartToolStripMenuItem.Click<br/>
LaunchWMI()<br/>
End Sub<br/>
[code]....
View 15 Replies
Mar 8, 2010
I have created a windows form based application and I want the form to add a user specified amount of user controls (with textboxes) on to a panel. The user can then click some button and the controls on this panel are cleared and new ones are added. The user does something and the process is repeated. Now, I wanted these textboxes to support spell checking and looked all over for a free solution.
WPF textboxes support spell checking where the ones in regular win forms do not. I thought I would be able to use these WPF textboxes by adding them to an ElementHost object which is, in turn, within a panel. This panel would be a user control.
So, in my application, I would be able to add instances of these user controls onto the form and make use of .NET's spell checking goodness. This actually worked but after using the application for a while, found that the application would eventually freeze on me due to out of memory errors. I have pinpointed the memory errors to these WPF controls since this problem does not happen with normal textboxes.
When the window is opened and the number of controls is specified, this is pretty much how the controls are added:
Dim xOffset As Integer = 0
For i As Integer = 0 To theNumber
Dim myUserControl As New SpecialUserControl()
[Code].....
There are a lot of results on the internet when I tried to find a solution and I'm thinking that the problem I am having is due to the fact that the WPF control is not going away even after clearing the panel. Following this conclusion, I have tried different solutions regarding disposing these controls or setting them to nothing but the memory problem keeps occurring.
View 1 Replies
Jan 19, 2009
Code to add a new row to my datagrid on click of add button. I am not binding my grid to a datasource.I m fetching values from the database through a datatable n then through a lood inserting t values to my datagrid. i m not binding the entire datatable as my datasource for the grid.
View 2 Replies
Sep 29, 2011
I'm trying to populate a datagridview with rows in the sqlserver 2005.how to use DataAdapters too well so I go back and forth between hard code and controls.I used the Datagridview control and added columns to it this way. 2 combo boxes, a check box, and 2 text boxes.The 2 combo boxes are populated with values that are already in sql Server for users to pick from. The task is displaying the description while the value is the task_ID. Here is my form on load:
Private Sub frmTimeSheet_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
currentDate = Date.Now.ToShortDateString
lblDate.Text = currentDate
[code]....
View 2 Replies
Nov 23, 2010
I have an editable datagridview that's been databound with dataadapter and datatable, and a normal button on a form. When i edit the dgv's cells and click the save button it fires the datagridview_cellvalidating event and if the cell validation is correct it updates and saves the current record to the datasource. Also, before save it commits change in any cell under editing.But when I use a toolstripbutton to do the same work, though it saves the dgv records but doesn't update the current change i.e. it saves the old records that are being fetched when the dgv was populated first during form load. Also, clicking the toolstripbutton doesn't fire datagridview_cellvalidating, datagridview_rowvalidating etc events.
What it seems to be is it's not commiting the change in any cell under
[Code]...
View 1 Replies
Apr 11, 2011
I have a DataGridView that displays data from a SQL Server database. It allows the user to edit the data and save it back to the database. The way that data gets saved back to the database is something like this:
Dim da As New SqlDataAdapter
Dim cmdBuilder As New SqlCommandBuilder(da)
da.SelectCommand = New SqlCommand(sql, conn)
da.InsertCommand = cmdBuilder.GetInsertCommand
da.UpdateCommand = cmdBuilder.GetUpdateCommand
Dim cb As SqlCommandBuilder = New SqlCommandBuilder(da)
da.Update(dt)
This works fine when I'm saving to ordinary tables. However I also want to save to a view that has an instead of trigger that fires on insert, update and delete. When I try to use the above with this view I get the error:
"Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."
How can I save to this view? I don't want to save directly to the underlying table because I want the trigger to fire.
I also tried manually generating the InsertCommand and UpdateCommand, but got the same error. It turned out I got the commands wrong when I manually generated them. Once I fixed that it worked fine - my view gets updated and the trigger fires as expected. I guess that you just can't autogenerate the commands for a view with SqlCommandBuilder.
View 1 Replies
Jul 21, 2010
Why am I getting an InvalidCastingException at the ".RowCount = 2" line?
Private Sub frmTesting_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
With DataGridView1
.RowCount = 2[code].....
View 1 Replies
Jun 21, 2010
Any tutorial and maybe a sample project that can be downloaded that shows how to update a database such as MS Access from DataAdapter commands in which changes are made in a DataGridView? For example, the DataAdapter contains 2 tables called FirstTable and the other table would be called SecondTable. The DataGridView is based on a query that shows rows from both tables. The actual table that contains the rows to be changed, inserted or deleted is FirstTable.
View 6 Replies
Dec 8, 2009
I populate a datagridview using a bindingsource and dataadapter. So I join 3 tables in the view to get the data i need.
so I have my view as a child table in my dataset. and a table called classes which is the parent table. So when I select a Class(class 1A for example), my datagridview displays the pupils in that class.
Now i need to add another relationship in the dataset. so when I select a day in a monthcalendar, I need to add 5 checkbox columns for each day to my datagridview. Should I add these 5 columns to my datatable? i'm not sure what the best way is.
Then for each day I tick I have to save to my pupil_job_day table. I will save the peoleid,their accountid and the date. please help me
View 2 Replies
Jun 29, 2010
i need expert opinion on saving data to database though efficient method/professional approach.I'm saving data using following code.[code]There are some other ways like, use Insert query, i want to know does above mentioned method take too much resources, or make db unnecessary busy
View 1 Replies
Mar 23, 2010
1. Can someone show me sample codes on how to do that ?
2. I encountered a problem with the INSERT sql statement. I keep receiving syntax error in insert statement exception. Is there anything wrong with the statement ?
[code]...
View 4 Replies
Sep 2, 2011
I refresh a DataGridView every second. It has about 50 rows. This ends up using the entire memory of the computer in about 1 day. I wanted to see what recommendations you had to clear up this memory leak.
The DataGridView1 is bound to a DataTable.
DataGridView1.DataSource = MyDT
View 7 Replies
Jun 1, 2012
I refresh a DataGridView every second. It has about 50 rows. This ends up using the entire memory of the computer in about 1 day. I wanted to see what recommendations you had to clear up this memory leak.
View 4 Replies
Sep 15, 2010
I had a large application that I needed to develop into two separate applications with different customer needs. I created a new VB.Net application and copied/imported all the forms and classes into the new application. The new application works but, for some reason all the forms have lost their 3d look, all the textboxes have a flat look now in the new application. It is as if I have lost a setting somewhere that controls the 3d look of the controls. I have checked the properties of each control and they still have the 3d option selected, and cannot see what else could be changed to get the 3d look back.
View 2 Replies
Jun 22, 2011
The following snip of simple code runs pretty slow on my computer, and I suspect that it is due to excessive memory usage, since the program reports using >1GB mem according to TaskManager. Am I using the DataGridView in a wrong way? Instructions: Make a windowsforms application and put 2x button and 1xDataGridView on it. Push button1 and then button2 - sort the data in the DataGridView by a different col and push button2 again. It'll go above 1GB mem usage! Basically I need to display a lot of data to a user and allow the user to sort the data and generate something from them.
Public Class Form1
Public dt As DataTable
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
dt = New DataTable
[code]....
View 5 Replies
Oct 12, 2009
Using VS Express 2008 and .NET2.0.
I have a DataGridView which has as its .DataSource a BindingSource, which in turn has its .DataSource set to a BindingList<> which contains some classes. All works well, and I potentially have a list of several thousand items, and hence several thousand rows on the grid. When I wish to disconnect binding, clear the list and hence clear the grid, I am setting the grid DataSource property to Nothing, and calling .Clear in the BindingSource.
However, it appears that when I do this, the memory usage (Private bytes) does not reduce until TWO full GC's occur. (Both metrics checked with PerfMon.) I can only surmise that the original row instances in the grid are hanging around and making it on to the Finalizer queue perhaps?
Is there anything I can do about this, or is it expected behaviour? I'm not sure if setting the DataSource property to Nothing is enough to 'purge' the grid properly. Using Reflector, I notice that DataGridViewRow inherits Dispose from it's base class, so do I have to call this somehow, or should the act of unbinding do this automatically? (The classes in the list are purely managed, and have nothing that requires Dispose calling on them.)
View 8 Replies
Feb 19, 2009
I need to compute the percentage of games won and games lost. I keep getting errors and it's driving me up a wall. I've changed my code so many times that I don't really remember what it was like when I started.
Private Sub btnPercentage_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPercentage.Click
Dim team As String
[Code].....
View 6 Replies
Apr 28, 2009
I m using vs2008 with vb and sqlserver. I just attached a .sdf database file to my project. There is a form to insert data in products table and a dgv to show that data. Everything is working fine, i inserted the data and dgv is also showing the data. But when i tried to see that data from server explorer, thr is no data, table is blank. Then again when i run my project thr is no data in DGV also. So problem is that when i entered the data and retrieve back the data in dgv,evrythng is fine,but when i tried to see my data from server explorer, data is lost. Why data is not comtted to my .sdf ?
View 4 Replies
Jan 2, 2012
I trying to create application that can read loss bmp with bmp constructor, what I mean loss is bmp without header, here the sample of loss bmp (zip is including with original bmp):
Download(you can see the different by comparing the original bmp and loss bmp with hex editor, the different is loss bmp don't have 54 bytes header bmp) Height of image is 126 px and width image is 45 px
my question is how I can preview that loss bmp in picture box? someone of my friend say, its need BMP Constructor to preview bmp properly but he doesn't know the code, please give me the code..
View 13 Replies
Oct 26, 2010
VB 2008 Express edition. I'm pretty new to VB2008, a little over halfway through my first classi am writing a console program to ask the user for the price of gas for 7 days, then to get the average of that price. here is my code so far:
Option Strict On
Module Module1
Sub Main()
[code].....
View 4 Replies
Jan 25, 2011
Private Function Compress(ByVal strInput As String) As Byte()
Try
Dim bytData() As Byte = System.Text.Encoding.UTF8.GetBytes(strInput)
[Code]....
View 1 Replies
Mar 9, 2009
I'm having bizarre performance results of the methods in FileInfo class.I'm using 5 methods of the FileInfo class in the Paint event.The datagridview is bound to the dataset.First the application searches files in the RecursiveSearch. When rows are added to the dataset the Paint event is fired and the rows displayed are filled with extra information from the FileInfo class . In this case the performance is very good. If I remove the DoEvents() from the RecursiveSearch the 5 methods of the FileInfo class become very slow (about 0.25sec for each line of code)!When the search ends, the user can scroll down to see the other files listed.At this point the Paint is again fired. This time the 5 methods of the FileInfo class are again very slow!
Private Sub RecursiveSearch(ByVal sPath As String, ByVal strPattern As String) System.Windows.Forms.Application.DoEvents() Try Dim strFolders() As String = System.IO.Directory.GetDirectories(sPath) Dim strFiles() As String = System.IO.Directory.GetFiles(sPath,
[code].....
View 3 Replies
Nov 7, 2009
my project is attached. I have a very weird problem with Winsock! I made 1 program with 2 forms. 1st form is the client, 2nd form is the server. Server send snapshot for client. So, client display either Single Picture. Or stream of pictures (to simulate video capturing).
when open 1st window (client) in a computer, and 2nd window(server) in another computer... it connect and display picture without problem just once!! when press "Capture" button again it may reponse or Winsock may loss connection. and when Check "Loop"=> means for stream of pictures.. Winsock loss connection immediatly! I don't know where is the problem exactly! The code attached. Winsock ocx is attached.. see it in the release folder
View 9 Replies
Jan 3, 2012
I trying to create application that can read loss bmp with bmp constructor, what I mean loss is bmp without header, here the sample of loss bmp (zip is including with original bmp): Download (you can see the different by comparing the original bmp and loss bmp with hex editor, the different is loss bmp don't have 54 bytes header bmp) Height of image is 126 px and width image is 45 px,how I can preview that loss bmp in picture box? someone of my friend say, its need BMP Constructor to preview bmp properly but he doesn't know the code?
View 3 Replies
Sep 30, 2011
how many of you out there in the VB.NET community have installed VS2010 SP1 and are experiencing this issue with the loss of intellisense in SQL Server 2008 R2?I'm holding off installing SP1 because I kind of like the intellisense thingy (though RedGate's SQLPrompt 5 is way better - have it at home).So is this pee-ing you off, have you explored workarounds, tries the hotfixes (that apparently don't work for many setups)?url...Please note that even though Cumulative Update 9 (CU9) was released the month there are still people it does not work for..including a coworker using a similar setup as mine (Win7 Pro, x32) This is a disaster and embarassment for MS IMO
View 2 Replies
Dec 28, 2010
I found a win, loss, percentage calculator in the forums. The form has a PLACE FOR INPUT
Team Braves
WINS = 96
LOSS 66
a button Compute Percentage and a text box it should read Braves won 59.259 percent of games. The program in the forums does not work. Does any one know how to do this? The math should be wins / wins+loss * 100.
View 2 Replies
Mar 15, 2009
I am trying to code to capture the packet loss on computers, but the only way I've been able to do so was to run the NetStat.exe and the TraceRt.exe processes and capture them to a listbox (using the code below):
[Code]...
View 1 Replies
Mar 23, 2010
I coded this program. It has three forms, when I try to open the [Design] on one of the forms it give me this error: To prevent possible data loss before loading the designer, the following errors must be resolved:
[Code]...
View 12 Replies
