Im trying to make a Basic Program with a Progress Bar. Showing Visual Representation of a Percentage. I would like the Percentage to be shown as a decimal value as well. [Code] But since i do not know how to show decimal places i can not get this to create the correct value thus having a pointless progress bar and label. [Code]
View 3 RepliesPrivate Sub uiSCORE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles uiSCORE.Click
'Displays Correct or Wrong in Labels
If ui1Textbox.Text.ToUpper = "FOOD" Then[code]....
I finally finished all my labels and textbox codes for this button.But now I have to code it so that I will be able to click the button and it will calculate all the wrong and correct answers in the labels and then finally place the percentage score in the uiScorePercentagelabel. What I dont understand is how to calculate all the different labels as one and then show the percentage right in the appropriate label.
How do you convert a decimal into a percentage in visual basic? I have the code to get the problem but I need to move the decimal over two places.
View 8 RepliesOdbcDataReader in showing decimal fields Decimal separator disappear with DB2 dsn
View 3 RepliesUsing .net To add a $ symbol for numbers I did Texbox1.Text.Format = "C"
How to add % symbol at the end of each integer to represent a string in textbox.
I want to know how to convert a percentage rate such as 4.5% into a decimal number in your code editor in V 2008.For example, the user input is 4.5%. Is there any function available to convert is to 0.045?
View 4 RepliesI'm trying to convert a percentage from my combobox selection to a decimal the combobox has the percentage sign in the selection. I've been reading around a bit but I'm not following on how to do it.
I need to convert the percentage to a decimal so that when I click calculate it can take the price and the discount and calculate what the discount will be.
[Code]...
As the title of the question, I need to validate regex using the following values:
(Maximum 2 decimal places, and 9 integers) with an optional percent symbol.
Valid:
10%
0%
1111111.12%
15.2%
10
2.3
Invalid:
.%
12.%
.02%
%
123456789123.123
I tried:
^[0-9]{0,9}([.][0-9]{0,2})d[\%]{0,1}?$
But It does not work as I want.
How do I show timer countdown to a text label in form? I have the following code set up:
[Code]...
What I'm trying to do is when I click button 1, timer start countdown from 15 sec. I want to be able to show this timer in sec and millisec in form in a text label so the user can see how much time they have left. (example: 12.56 sec remaining)
I have three textbox textbox1, textbox2, textbox3where
Textbox1.Text = 739
TextBox2.Text = 2.95
TextBox3.Text = Val(TextBox1.Text) * Val(TextBox2.Text) / 100
[code].....
On a Form in a Windows Application I have 1 ProgressBar 1 Label1 underneath ProgressBar1 to show File name and perventage 1 RichTextBox1 (displays all files in progress) 1 Button1 underneath RTB to start the copy process Now, my percentage looks rather like this: 75.012358%How could I get the percentage showing without decimals behind "."? Here is the line of code:
Label1.Text = ((i / totalfile) * 100).ToString & " % files copied"
Can I format it to show one decimal point? eg, 206.6. I noticed this custom toolbox item has Format.
View 7 Replies1) One Decimal Varibale stores a decimal value
2) The value must be converted in string ( some time the comma is used as decimalplaceholder some time the dot)
3) the user modifies the value
4) i need to riconvert the string back in decimal
how can i do this
so:
Variable 123.34D ----> textBox 123,34 or 123.34 -----> variable 123.34D
Currently using VS2008, VB.NET, SQL.
I have a FormView from a Data Source that is getting some fields that are stored as Decimals in the SQL Database.
I am grabbing the field from the FormView as such:
Dim AvgTicketL As Label = CType(frmMerchantProfile.FindControl("F10Label"), Label)
I need to take this value, and convert it to an Integer, then send it along to an API. I have the API Calls done, tested and working, but I'm getting an error as when it is getting this value, the API is returning "Must be an Integer" error.
What I have tried so far:
Dim AvgTicketL As Label = CType(frmMerchantProfile.FindControl("F10Label"), Label)
Dim AvgTicket1 As Integer
AvgTicket1 = Double.Parse(AvgTicket.Text)
Do something with AvgTicket1
I have also attempted to Round the Value, then convert it and call it - no luck.
Checking the value of AvgTicket1 (Writing it out to a Label or Response.Write) shows "100", where the database value was 100.00. But the API is still getting 100.00, apparently. Any other conversion method that I've attempted states errors that the Label cannot be converted to Integer.
What are some methods I can successfully convert this value to an integer from a label?
For some time I try to get the comma instead of the decimal point, but the labels I use won't display a comma. For some reason I don't understand, the msgbox() does the trick, but is useless in my application. This is my last desperate piece of code I tried but it also failed.
Expresserprijs = EuropluscolNL(ArrayCol, 2) - EuropluscolNL(ArrayCol, 1)
' All above are "Doubles" and are fed with data like 21,45 (with comma's that is)
Decimaalteken = Expresserprijs
' Decimaalteken is a string
MsgBox(Decimaalteken)
[Code] .....
I have several buttons in my form and they each need to add, subtract, divide and multiply certain values together but I seem to be having problems with this. I didn't expect anything to go wrong and its probably a rookie mistake, but take my first calculation for example; a user must enter a value in a textbox (txtDays) and and also when one of my various radio buttons are pressed a value shows in a label (lblDailyHireCharge). I now need a way of multiplying these values to give me my answer shown in a label. I have done this by adding a button when which pressed multiplies the txtDays value with the lblDailyHireCharge and then shows it in the label, however it keeps on showing "0" when i click it.
Below is my code, I am basically saying that the value of both of those figures is intDuration and that lblDuration is where I want it to go when the button is clicked.
Private Sub btnDuration_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDuration.Click
Dim intdays As Integer
Dim intDailyHireCharge As Integer
Dim intDuration As Integer
[Code] .....
I am trying to add a little functionality to my textboxes by making a label show when the values of the textbox are greater than a certain amount. The method is working, but only works on certain values (between >8 and 10) and I can't figure out why it won't work on values greater than 10.
Private Sub Submit1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Submit1.Click
Dim sum As Double
Try
If hrs1.Text <> "" Then
[Code] .....
I've also set the visibility of the labels to false in the onload event of the form.
In a project I am doing, I was hoping to show a listbox at the bottom of a label when I click the label so a number can be selected. I don't want to use a combobox or numericupdown because of the look. The problem I have, and I hope can be resolved is that when the listbox is shown, it is drawn under the other controls. Is it possible to show it over the others?
View 3 RepliesI made a hotel quote form where I want to add a discount box where the user can enter a percentage discount off the total price. What is the code to do that? [code]
View 11 RepliesI have Access 2007 db in which users insert some data (name, last name etc.). This db is for some problems in my work and every of this records needs some solution. When we solve this problem we come back to this record and select YES in yes/no field of db.I want to count inserted records and show it on first form of my application like this (label or text field, it is not important) :
* all records : 124
* solved records : 50
* not solved records : 74
in my program I have a section that is outlined as listed below - in the page load, the label's visibility is set to false.
lblLoading.visable = true
lblloading.text = "loading please wait"
UpdateData()
lblloading.text = "Loading Complete"
It takes about a minute or 2 to run updatedata as it is doing multiple things to a database - when I execute this code, it stalls and loads the data, then when done I do get my label that says loading complete, but I never see the label before it is done loading to tell the user that it is processing. Is there any way to force it to show before UpdateData() is called so that it shows during the load time?
How do I show a continuous time stamp on a label in windows form.
I am using vs.2005 - vb language
I made a simple textbox with a submit button and a label and when you type in something into the textbox and hit the submit button what ever you typed in the submit button is suppose to show up in the label box but i type in DaFallenAngel in it and it only shows D why is it only showing D and not the full name? [code]
View 9 RepliesI have an issue when I place a label box in the MDI Parent form and then open a child form the label box highlighted in child form?
View 6 RepliesI got a string array & I need to show the contents of it to a single label. It acts like a clock. The thing is I tried with everything I could but I failed. This is the code I've been trying. Its in vb.net. And theres a thread running to slow down the loop so I can display the contents in a label for 2 seconds.
Dim j As Integer
For j = 0 To readText.Length
label.text=readText(j)
Thread.Sleep(2000)
Next
How do I show a continuous time stamp on a label in windows form.
I am using vs.2005 - vb language
What is the cleanest, most readable way to String.Format a decimal with the following criteria
start with a sign symbol (+ or -)
a fixed number of fraction digits
no decimal separator
right aligned
pre-padded with "0"'s
I have a form with 10 math questions. Beside each question there will appear a check mark if it is right and a X if its wrong. I also have a label that will display a score in percentage. If 2 are right then it will display 20%. If they are all right then it displays 100%. My problem is ...how can I code the event. I thought of case select, but that would mean 100 cases to make it work.( If check1 and check2 are visible then display 20%, but if its check1 and check 7? Thats alot) What I want ot know if there is an easier or shoter way to ontain the same result. I am working with Visual Basic 2008.
View 7 Repliesi am working on Scrollable form, when i am trying to print this form with PrintForm object its printing only the showing part not all the form this the code which am using. Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click Me.PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable) End Sub
View 7 RepliesI fear that there is something obviously wrong with my code, but I have come across a situation where the Form.Load event is not firing when I create and show my form. The form is not subclassed (as I've seen some problems with that in some searches), and I am not getting any errors thrown when I step through the code in the debugger.
I have a break point set on the IDE-created form load function (which does have the Handles MyBase.Load signature suffix) but the breakpoint is never reached and the form does display and work.The form is passed three arguments in the constructor but the IntializeComponent() function is called before anything else is done.
[Code]...