Sql Parameter Setting Incorrect DbType
Jun 22, 2010
So I have this weird issue where I set a SqlParameter.DbType field = to a SqlDbType.Decimal, but instead it sets it to a SqlDbType.DateTime. I'm going to include 2 screen shots from the debugger one line after the set statement. As you can see when I hover over (just after the execution of that line), it set the param.DbType to the wrong value. I can only assume that the param.DbType has code that incorrectly changing the type. How can param.DbType become a SqlDbType.DateTime when the varable I'm setting it to is a SqlDbType.Decimal? I'm targeting the .Net Framework 3.5.
View 5 Replies
ADVERTISEMENT
Nov 27, 2009
The parameter to a sub is being passed a value like 501/500, of coarse this value should be converted to 1.002. Unfortunately, the actual value being passed to the parameter is 1.0.
[Code]...
View 2 Replies
Jun 13, 2011
i tried to pass parameter to crystal report viewer. but it show The Parameter is incorrect.
Dim rpt As New ReportDocument
rpt.FileName = My.Application.Info.DirectoryPath & "MAuditList.rpt"
Dim paramDV As New ParameterDiscreteValue()
[code].....
View 1 Replies
Jun 29, 2011
The programs runs fine for about 10 seconds but then I get this error message: ArgumentException was unhandled. Message: The parameter is incorrect. Here's my
[Code]...
View 3 Replies
Jun 30, 2009
I have a service that runs under local system that I need to have execute an external .exe using alternate credentials. Using the code I have posted here, I get the error "Error-:-The parameter is incorrect" and the target site is "Boolean tartWithCreateProcess(System.Diagnostics.ProcessStartInfo)"Here is the code:
Try
Dim AuditProcess As New Process
Dim p As System.Security.SecureString = New System.Security.SecureString
[code]....
View 5 Replies
Oct 26, 2009
Here is my problem: I developed one application in VB.Net in VS 2008 Express Edition on MS Vista. I published the application and created the installation setup. Now when I install this application on any Vista machine, it runs without any problems, but if I install it on an XP machine, the installation is clean, but when I launch the application, it ends abruptly without any warnings/error just after the splash screen.
Then to investigate further what I did was that I copied the source project from my VS 2008 Express Edition on Vista to an XP machine having full (VS 2008 Team System) version , and when I try to compile it there (XP/VS2008 Full), I get one error in one of the forms resx file. Incidently this is the same form that gets loaded after the splash screen. So I see there is some correlation between my application ending just after the splash screen and failing to compile the main form of the application. The error that I get reads like: "Invalid resx file. The parameter is incorrect Line 1374, position 5."
View 2 Replies
Nov 23, 2009
System.InvalidOperationException was unhandled.
An Error occurred creating the Form. The error is: The Parameter is incorrect
View 1 Replies
Nov 30, 2011
Incorrect type for parameter Source:MSRDO.rdoColumn Number:40060 Description:Incorrect type for parameter. I have encounter the above problem by editing column(Comment Dropdown Box) . I only have sql DB and don't have VB code.:(( How should I do for this problem?
View 1 Replies
May 27, 2009
When I try to call System.IO.File.Encrypt() on an existing file, it throws a generic IOException, and the message is "Parameter is incorrect". System.IO.File.Encrypt("C:ProjectStorageDirectoryfile.txt")
The current user the process is running under has full control to the "StorageDirectory" folder. Is there something I'm missing permissions-wise?
View 3 Replies
Oct 24, 2010
i have a problem writing to the registry. This is my code:
[Code]...
View 3 Replies
Nov 12, 2010
I tired the following Query to access my SQL Server database. It returns an error. SELECT Name, Address, PhoneNo FROM dbo.tblContacts where name=?
[Code]....
View 1 Replies
Feb 20, 2010
Let's say we have a value coming in through the URL of a page. Example: www.test.com/page.aspx?&Key=Val. Val is retrievable through Request.Querystring("Key").Is there an accepted best practice for assigning a QueryString Value to a parameter of a SqlDataSource defined on an ASPX page?
Options that I know of: Do not include parameters in the ASPX file. Add them directly through the codebehind -- and assign Param.DefaultValue upon adding. Set Param.DefaultValue in the page load (Codeblock 2)
Both of these use DefaultValue, a property that clearly was not intended to be used in this manner. Do the ASP.NET overlords have a recommended method in mind for achieving this common task?
[Code]...
View 2 Replies
Mar 30, 2010
What i am trying to achieve is relativly simple but for some reason i cannot get it to work. I would like on form loads for the contents of a textbox to set the value of a parameter @CustID and the Stored Procedure to be used to return the result into a DataGridView.My datagrdview1.datasource= "StoredProcedure1" but how to i set the parameter value and tell my app to execute.
View 29 Replies
Aug 9, 2009
if i miss to set dbtype of my parameters (common.dbparameter) it works fine again?Is necessary to explain dbtype or not?
View 1 Replies
Apr 17, 2012
Here's my current set-up:
Public Interface IDatabase
Function CreateParameter(name as String, dbType as <dbTypeEnumeration>)
End Interface
[Code]....
The problem here is what exactly is dbTypeEnumeration. In the example above, it's simply a placeholder to what my problem is. Since we use both Oracle and SQL Server databases, the DbTypes are different depending on the database being used. For Oracle, the OracleClient object has its own OracleDbType enumeration with types. SQL Server also has its own enumeration.
My question is: is it possible to show those database-specific enumerations depending on which repository is injected into the DatabaseService constructor? If not, what's the best way to go about this? I want to separate the two databases, share logic, and allow for future development, ala the interface as a code contract for that development.
View 2 Replies
Apr 4, 2012
When I looked at the database record, the datetime saves like this: 4/6/2012 04:42:28 PM
because I've save it using dbtype.string
Now, I'm getting the date only, not including time, this is my code:
Private Sub getpapererror(ByVal ddate As String)
Dim sqlstr As String = "select * from perror where date(ddate) = $xddate"
Dim sqlcmd As New SQLiteCommand(sqlstr, mycon)
[Code].....
View 1 Replies
Aug 22, 2011
For no apparent reason, I'm getting an exception on this line in my when the table adapter attempts to fill my dataset.
Me.TblFuelTableAdapter.Fill(Me.CCFuelDataSet.tblFuel)
The error reads:
Quote:
System.ArgumentException: No mapping exists from DbType Object to a known SqlDbtype.
This error just came out-of-the-blue. If I 'Preview' the data though the DataSet directly (using the Fill() query), the data returns fine...
View 3 Replies
Apr 23, 2011
I'm trying to assign some parameters for a stored procedure with some values that are stored in a data table. in the code, I can set the parameter values to the data table, and give a column header or index without issue, but when it tries to execute at runtime it bombs out.the error I get is a variation on "Failed to Convert Parameter Value from a DataColumn to a String" depending on exactly how I try to assign the value.the data types are all correct elsewhere in the code.
my code for this bit is
Try
ConnectionAttempt.Open()
Try
With NewYearCommand_Dates
[code]....
other things I've tried to get this to work are all variations on the .Value=dates bit, such as
.Value=dates(0) (so using column index)
.Value=dates.columns(0) (again using column index)
I've also tried declaring variables, and setting their values to the values in the columns, but the code returns an error saying that "Value of type 'System.Data.DataColumn' cannot be converted to string".I should point out that i'm doing this for 3 tables at once in this sub, 2 of them will only have a single row of data, but the third has an indeterminate number of rows.I'm afraid I don't know what else to do. I'm lead to believe by my mate and my lecturer that this should work, and of course it will work, but the evidence says otherwise.
View 1 Replies
Aug 13, 2010
i just want to make a program with first form to enter the serial if correct just continue to form2 if incorrect just a popup say like "Serial Incorrect" how i can make it ?
View 2 Replies
Apr 21, 2011
Following code doesnt work and raise error "A parameter is missing. [ Parameter ordinal = 1 ]".What s wrong with it?I am developing pocket pc application in vs 2008 and sqlce 3.5 sp1.
[code]....
View 1 Replies
Mar 21, 2009
I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
View 2 Replies
Mar 9, 2011
I want to have a "template" function that can receive different parameter and a type parameter, like:[code]But Vb told me that tupeList is not defined... is there a way I can do that?
View 2 Replies
Oct 26, 2011
Is it possible to make a procedure have a single parameter but the values for that parameter are more than one? I have this procedure:
Public Sub autoComplete(ByVal cboCombo As ComboBox)
With cboCombo
.AutoCompleteMode = AutoCompleteMode.Append[code]....
Now I was wondering if there is a way to use it like this:
autoComplete(myCombobox1, myCombobox2, myCombobox3)
Or can I use a procedure like this with 'With...End With'?
View 1 Replies
Mar 1, 2009
I have a method which requires a parameter to be passed in. I would like to use the Addhandler to call the method through a dynamically created button control's click event.
When I include () in the AddressOf, VS complains: 'AddressOf' operand must be the name of a method (without parentheses).
When I exclude the brackets, VS complains: Method '...' does not have a signature compatible with delegate...
My code:
CODE:
View 5 Replies
Dec 10, 2008
One of the things that I think is really cool about VB.NET is how built-in functions and subs have extra help text in their ToolTips like "Expression: String expression to search for replace string." as well as the usual "Replace(...parameters...) as string" text. So are the pop up boxes with things like "CompareMethod.Binary" or "CompareMethod.Text." And finally I like how some functions and subs have different sets of parameters for the same routine. For example, New FileStream() starts with either a path (string) parameter or handle parameter, but none of the 15 sets of parameters contain both path and handle parameters. Is there a way that I can set up the classes and functions I write to use these things or do they only work with built in classes and functions? If there is a way, what are the proper names for them so I can look them up in the VS/VB documentation? I would be happy enough if someone would give me an example of them, but it would be nicer if I could go through the documentation and find out if there are other cool things that are related or near by.
View 3 Replies
Aug 23, 2010
I need help and wondering if you can help me to get my first project...it's a hobby and wondering if you can get me code for this so i can see how it does it* Evaluate( ) Prints the evaluation of the hand to the evaluation Label.
o If IsFlush( ), prints "flush; "
o calls SetPipArray( )
o Uses a For Loop to go through pipArray. For each element, uses a Select Case statement to
[code]....
View 9 Replies
Feb 13, 2012
In our projects we use setting variables to store user setting for the applications. Moreover, with every latest version of the applications, we upgrade these variables to retain user settings.Normally, this works fine, but recently one of my end user reported an error i.e.Configuration System failed to initialize". The error is related to user.config file. Therefore we requested the user to send us his file.After received the folder, we noticed that it contains 3 files (3begfjb.newcfg,3begfjb.tmp and user. config). 3begfjb.tmp is an empty file, while 3begfjb.newcfg and user.config are identical files. We tried to open these files but the data in user.config isn't proper xml rather its unreadable formatted file.Do any you guys had experienced this sort of issue or any ideas how and what may have created these files and corrupted user.config file.
View 3 Replies
Apr 26, 2009
have an idea on what i am doing wrong here:
Compiler Error Message: BC30455: Argument not specified for parameter 'dteRDate' of 'Public Sub New(strOName As String, strOAdd As String, intOPhone As Integer, strVer As String, dteRDate As Date, dteWDate As Date, strONote As String, strOrName As
[code].....
View 1 Replies
Jul 16, 2010
I have a vbscript that runs under asp page. I need convert the code to VB.NET
SET objCommand = Server.CreateObject("ADODB.Command")
objCommand.ActiveConnection = Application(DB)
With objCommand
[code]....
What is the VB.Net that will do exactly the vbscript does? I like paramer(0) and 1 and 2 etc since I don't need to define the parameter(0) as integer or varchar etc. I remembered I have discuss this before and it is possible to do in VB.NET?
View 4 Replies
Apr 7, 2011
I used to have this one
Dt = MyMod.GetDataTable("SELECT TOP " & QuestionsPerCats(i) & " * From Questions WHERE CategoriesID ='" & Cats(i) & "' ORDER BY NEWID()")
but now i decided to use sqlparameters like
Dim cmd As New SqlCommand("SELECT TOP @QuestionsPerCats * From Questions WHERE CategoriesID = @CategoriesID ORDER BY NEWID()", conn)
Dim sqlParam As SqlParameter = Nothing
sqlParam = cmd.Parameters.Add("@QuestionsPerCats", SqlDbType.SmallInt)
[code]....
and returns the following error
Incorrect syntax near '@QuestionsPerCats'.
View 3 Replies