Unable To Debug After Publishing The First Time?
May 14, 2009
I have been writing a program in vb(in visual studio 2008) for 5 months now. Today i went to publish it and went through the publish wizard. It worked fine but now i can't debug my program in visual studio. I hit the debug button it starts and completes the build and the does not do anything. Is their some thing that i may have unknowingly changed when i published the program? Or a setting that i need to change now that i have published the program?
View 7 Replies
ADVERTISEMENT
Feb 28, 2009
i'm unable to debug my project that i made. i save it and everything, but it just won't playit says Warning 1 Could not find type 'WindowsApplication1.My.Resources.Resources, Time table'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built. C:SchoolIPTTime table, using 2 loopsTime table, using 2 loopsForm1.Designer.vb 123 0 now when i open it up and try to debug it , it comes up with an error, i even try referencing it but it does nothing ,
View 2 Replies
Nov 20, 2011
I'm using VB2010 Express for a project that uses a DLL for USB communication to hardware.
I have the DLL in the project so it's included in the install. Everything's fine & the project runs in the development environmet until I publish. As soon as I do, I get the following error when I try to run from the development environment:
Unable to load DLL 'USBConverterDLL.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
I worked out that the DLL needs to be present in the debug directory. Any idea how to make sure it's put there automatically when the project is first published?
View 1 Replies
Oct 7, 2010
I'm using VB2010 Express for a project that uses a DLL for USB communication to hardware.I have the DLL in the project so it's included in the install. Everything's fine & the project runs in the development environmet until I publish. As soon as I do, I get the following error when I try to run from the development environment:
View 7 Replies
Jul 28, 2010
I have a solution with two projects. The main project connects to the second project via a reference, and the reference path is local to my machine. It looks like it references the .exe file.So when I publish the main project (ClickOnce), i get the following error:
Application validation did not succeed. Unable to continue.In the log file, under Error Details, it says
System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the download assembly Project2.exe
- Source: System.Deployment
How can I include this second project? Should I publish it, then reference the published files? What do i reference? The .application file?Is there a way to just include this second project, so when I do publish the main project, the second one just goes along with it?
View 3 Replies
Aug 5, 2010
after recently creating a build of one of my projects, I have starting work on my project again.After altering some code, I found that I was unable to debug my program.
View 8 Replies
Dec 21, 2010
I am using Visual Studio 2008, .NET Framework 3.5.
Basically what I am trying to do is have my webpage project folder located directly on my local machine (ex. Local #1).Our database is located on a server (ex. Server #1). I am building my web applications on my local machine and then trying to debug them in Visual Studio 2008. Only every single time I click to debug my project I get a "Security Exception" error that looks something like the following.[code]...
View 2 Replies
Mar 11, 2009
I am having problems with debugging with VS2005 when I press F5 an error occurs saying "Page cannot be displayed" I don't really know what happened maybe the latest windows patch screwed my VS2005.
OS: Windows Vista
VS: 2005
Browser: IE7, Firefox
View 2 Replies
May 22, 2009
About publishing my program. there's a lot of files made after publishing unlike in vb6 when i converted it to exe file theres only one file. hmm how can i make just one exe file in vb9 is it possible? another question do i have to install the program after publishing?
View 5 Replies
May 19, 2009
I've been assigned a web app written in VB using VStudio.net 2003. I am trying to configure the source on my localhost (VStudio 2008) so I can explore and learn about the current app (before I begin any real changes) and I cannot get debugging working for the web service project(s).
Symptom 1: "Unable to automatically step into the server. The remote procedure could not be debugged. This usually indicates that debugging has not been enabled on the server. See help for more information". This happens when I try to F11 (stepInto) the proxy class which invokes my actual web method.
Symptom 2: Pre-setting a breakpoint in my .asmx file code on the statement that will be invoked does not work (i.e. the debugger simply doesn't stop). Having described the situation, here's how my VStudio Solution is configured: Service1 - project created from the VB - WEB - ASP.NET Web Service Application template; this Service1 project contains my main .asmx source code I want to debug. Web.config for this project contains compilation defaultLanguage="vb" debug="true"
[Code]...
View 4 Replies
Jan 5, 2009
I have the following codes:
me.hide()
staff.show()
It run smoothly for the first time,but when I execute it for the second time,it occured the following errors:Unable to copy file "obj\Debug\FYP.exe" to "bin\Debug\FYP.exe". The process cannot access the file 'bin\Debug\FYP.exe' because it is being used by another process.
View 3 Replies
Jun 8, 2010
I would like to be able to time a page load time in ASP.net (VBscript). Adding Trace="true" to the page directive is nice, but I need to actually time an event and store it in a variable.In ASP it was easy with the Timer object, but in .net I can't find anything on Google.
[Code]...
View 3 Replies
May 26, 2011
I have a problem. I have created a control, Now whenever I am going to Drug that control on my form then a error popup will appear that says "Failed to create component 'XXXXXXXXX'." System.IO.FileLoadException: A strongly named assembly required. HRESULT: 0x80131044 Is there any facility available in .NET for design time debugging Means If I drug a control on form then I will allow me to debug the control.
View 1 Replies
May 1, 2012
I am working on a project in Visual Basic .NET 2010 on Windows 7 SP1 that previously ran fine in Windows XP SP3 but has recently started crashing immediately upon running the executable. I have made several additions/changes since the last time it was tested on XP, so it is difficult to pinpoint what might be the problem. (I commented out all of the start form's _Load event, which causes the form to load with no events triggered in the IDE, but the program still crashes in XP, so I suspect it's something other than my code, though I don't know what else could have changed to trigger it.)
[Code]...
View 15 Replies
Oct 21, 2010
i keep getting the error unable to convert chartype to date time or Error incorrect syntax near 14.[code]Please any help on inserting a string into a datetime field in SQL Server.
View 5 Replies
Jul 17, 2009
I'm unable to get rid of the leading zeros in my time format. I want it to say 2:30 (two minutes 30 seconds) not like this 00:02:30. Is there a way to do this? DateTineInput1 and DateTimeInput2 are both text boxes. Here's all the code for the time format and duration
Private
Sub
lstTracks_SelectedIndexChanged(ByVal
sender As
[code]....
View 1 Replies
Feb 19, 2012
I am reading a CSV file using OLEDB command in VB.Net
Everything is working fine. the only problem is that one of my columns has time value in a format "07:53.8"
When i read this value using dr.item(1), it reads the string into a date "01/25/2012".It gives me the same value in dr.item(0)
I am not able to read the correct value as shown in the CSV file.
following is the code
For I As Integer = 0 To 2
dr = dt.Rows(I)
MsgBox(dr.item(0))
[Code]....
View 7 Replies
Aug 31, 2011
Simple question that does not seem to be covered: If I use a lot of Debug.WriteLine statements in my code, will they be completely absent in my production version?
I mean: Is the compiler smart enough to not emit any code for those calls? Or would I have to surround them by #if DEBUG..#end if directives?
View 3 Replies
Feb 22, 2010
I've been trying to make up a Ghost Text Box, so that it shows some 'ghost' text when its contains nothing.
What i did was inherit from the normal textbox, and use OnPaint to show the ghost text, the User paint is switch on/off depending on if there is any text in the textbox.If i start (in the design) and add some text it all works as i expect at runtime, but the text does not get shown at design time (for some reason)
If i clear the text at design time, then it shows the ghosted text at design tim. At runtime the ghosted text is shown, but when you click in the box and hit a key, the key is shown in bold, which is odd as the font is not in bold.
[Code]...
View 1 Replies
Aug 12, 2009
While I am running the following code
If rdrOnClick.Item("DOB") <> "" Then
dtpDOB.Value = rdrOnClick.Item("DOB"
End If
the error occur
Unable to convert MySQL date/time value to System.DateTime
View 2 Replies
Feb 23, 2012
Although I have no errors in my code; however, I am not able to find the time it required to do the shell sortwhat am I missing in these codes?
[code]....
View 2 Replies
Oct 7, 2010
I want to be able to type text in a search box (textbox1) and have the datagrid adjust at the same time. My datagridview is called DGEstudent and the data source is dataset2 and is pulling from the student table. As soon as I start typing in the textbox my datagrid just goes blank. Private Sub TextBox1_KeyUp(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.KeyUp
Dim dv As DataView = New DataView()
dv.Table = DataSet2.Student
dv.RowFilter = "First_Name like '" & TextBox1.Text & "%'"
DGEstudent.DataSource = dv
View 5 Replies
Dec 26, 2011
I need to display on my datagridview the data from MYSQL db, but I'm having a problem on a field which is in DATE format in mysql
cmd.CommandText = "SELECT * FROM tbl_user_log"
cmd.Connection = sqlcon
dr = cmd.ExecuteReader
[code].....
View 1 Replies
Feb 19, 2010
I have a windows 7 computer with vb 2008 express on it. it works really well, except only one thing. when I try to debug an application ( usually windows forms), it produces a run-time error saying: Error while trying to run project; unable to start debugging.
View 2 Replies
Jan 31, 2009
I have got a MySQL database that has got some dates stored in a Date format (YYYY-MM-DD) however when i try and import the data i get an error saying: "Unable to convert MySQL date/time value to System.DateTime"
[Code]...
View 5 Replies
May 12, 2011
I had a working WCF published to IIS on my server. Recently I created another, self-hosting WCF (windows service) and added a reference to it from my WCF on IIS. Like this:
ASP --> WCF (in IIS) --> WCF (as win service)
Now, I can't seem to add a reference to my first WCF in my ASP app. So I've got this:
ASP XXX WCF (in IIS) --> WCF (as win service)
Here's the service model from the WCF in IIS. I'm publishing to http://localhost/LetterWriterASP/
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.A full list of settings and comments can be found in machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<configSections>
[code]....
View 1 Replies
Apr 9, 2010
when i publish an app in vb.net it creates some files: application files directory, app.application, and setup.exe i am going to be distributing this application to people who can barely use a computer, so i need to bundle everything in one, self-extractable package.
View 1 Replies
Jan 12, 2012
In my current program, I'm calling some EXEs by just clicking on a button (so basically an all-in-one tool). (I'm using VS 2010)Question is: when I publish my project, you get of course a setup which you have to install. I'd rather have it be an EXE you can just launch.
View 5 Replies
Sep 5, 2006
When i use the 'Publish <ProjectName>' feature in VB .NET, a setup file is created. When u run the setup, u cannot specify where u want to install ure program. Is there any way to change that.
View 5 Replies
Oct 7, 2010
I'm a college student, and I made a web-based game for a friend using Visual Studios. I created a WPF project, and it's saved as an .xaml file. All of the free web hosting sites I've found would only let you post in HTML, CSS, or Flash. I've looked online for any help, and even looked for converters.
View 2 Replies
