I have the most puzzling problem with VS2008 in regards to debugging my programs. Until recently I have been coding in VS2010 but due to some other system requirements with my work issued PC I have moved back to VS2008.All apps I developed in VS2010 always have and continue to debug as expected. However, any app I write in VS 2008 and try to debug, the application immediately ends before the first form is loaded. Again, if I run the same code in VS2010 I have no problems. I did notice the other day that if I debug without being connected to my corporate network, I can debug in VS2008 just fine.
I'm trying to fill some textboxes programmatically after clicking the bindingnavigator add button but the textboxes wont fill..Using the listchanged event of the bindingsource doesnt work neither..[code]
I copied a project I wrote on my XP machine to my other computer with Windows 7 64-bit. When I run it through VS2008 it exits immediately. It does not run a single line of code. The exit code is 0. I need to post what else it says. But I did find a posting about this saying the path to the temp files may be wrong for it but he did not know how to change this. If I create a new peoject and put a command button on it, the program runs. So I was wondering if it is something like the temp files or something else. The machine runs a compiled .exe of the program from the XP machone when installed on the Windows 7 machine. So I do not think it is the program not being compatible.
I'm slowly learning about loops. I have a couple of questions
1) When a condition is being tested.. what does that mean? I don't understand the "condition" word.
2) What is the difference between a loop that never ends and a loop that ends?
I have the code for the loop that ends and the loop that never ends. I can see the difference in the code, but I don't understand what is making it different. Here is the code below.
Within my Visual Studio 2008 VB.Net project I am opening multiple forms after setting the form (that is opening) to be an mdichild of the main form. This works in really well in most of my forms except one. I am doing the exact same thing for all of them.
Basically I declare the new form:
Using frm As New frmName() With {.variableName = currentVariable} frm.MdiParent = Me.MdiParent frm.openForm() End Using
Within the openForm subroutine in the form code I have:
Public Sub openForm() InitializeDataSources() ... ... Me.Show() End Sub
I know this works because if I remove frm.MdiParent = Me.MdiParent in the main form and change Me.Show() to Me.ShowDialog() in the child form then it works perfectly. Right now (for only one form) it shows the form for only a second (looks like a flicker when staring at the program) and then closes it.
I'm having to write a reporting application that gets information from some Interbase servers and it also has to work on Vista as well as XP, I'm using to connect Borlands Data Provider.[code]My Issue is that debugging on my xp Machine the dataset gets filled, debugging on my vista box it fails ("Interbase provider initialization failed"), my initial thought was that this could be UAC related but I've compiled the application and 'ran as admin' and still same issue. (by the way it failes on the line Dim da as BdpDataAdapter...)
I want to step through VB.net 2008 project file. The code is executed from the postbuild command line. Thus this code is really executed during the build process.Thus, can you tell me when I can do to debug this VB.net 2008 program that is executed from the command line? All I know what to do is have the solution (ide) open, set breakpoints, set the project as the startup file, and run the debugger.
While reading about Visual Studio 2010 I`ve read that it has a possibility to begug only small pieces of code (eg. Functions, Subs). Is it possible to debug only one function in VS 2008?
I use Express Editions of VS2008, but maybe standard or Pro version has such functions?
PROJECT TYPE: Windows Forms Application LANGUAGE: Visual Basic .NET VERSION: 3.5 IDE: Visual Studio 2008 OPTION STRICT: on OPTION EXPLICIT: ON
I am attempting to teach myself VB and write a parental control application at the same time, so my learning curve is rather steep. However, I have managed to complete the design of the application with no design time errors, and to my untrained eye, all my code looks like it should work. Unfortunately, when I attempt to debug the thing, it returns an error that looks like Greek to me. I have traced to line numbers I found mentioned in it, but I couldn't find anything wrong. I just need someone to point me to the part of my code that isn't working, and maybe give me an idea of how to improve it.
The project consists of 3 forms: MainForm, WarningForm, and AboutForm. The 1st and 3rd are self explanatory, the 2nd is simply a message popping up telling the windows user that they have 10 minutes before they will be logged off of windows. I cannot imaging why any of the codes on the 2nd or 3rd forms should be causing this issue since they don't activate until either a button is pushed (AboutForm) or after a certain number of hours has elapsed (WarningForm). So unless someone feels that it would be helpful, I won't post those on here.
i run vb.net 2008 in windows 7 (Greek), when i am using the debbuger in vb.net 2008 the messages that i get are in greek (translated from english). i suppose that happens because my operating system is greek, so my question is if there is any way to set up in vb.net 2008 to get messages or warnings in english?
When I try to debug my program, it sometimes catches the first breakpoint, but as I step into each step, it just skips and runs the program. Is there some kind of setting that I can make in vb 2008 express that will allow me to see my code step-by-step?
including the runtime error message I receive that keeps killing my application. I am about to pull my hair out because I cannot find anything wrong with the code, and I do not get the error when debugging the application in VB! Basically a user enters some medical information on a form in text boxes and adds some medical conditons and medications into two listbox controls on the form, on for medical problems and one for medications they are on. When Button1 (command button) is clicked, it calls a subroutine stored in a module1. Then the application throws and Index out of Bounds error and crashes, losing all information that was entered. Here is the code on Button1:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNext5.Click Call Store_MedData End Sub
Here is the code for Store_MedData in the module. The error occurs on red text:
Dim ClientLastName as string, ClientMI as String, ClientFirstName as string, ClientAddress as String, _ ClientAddress2 as String, ClientCity as String, ClientState as String, ClientZip as String, ClientDOB as String, _ ClientBloodType as String,ClientActiveMeds(frmmain.lstActiveMeds.Items.Count - 1) As String, _ ClientActiveMedProbs(frmmain.lstActiveMedProbs.Items.Count - 1) as String
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. The application is being run on a PC running Windows Vista Home Premium w/ SP1. (aka. Windows "Worthless Edition")
In my code I had coded Mousewheel event for Picturebox. Then later i observed there was a bug in the part of the code which needed o be corrected.Then i corrected the code and tried to rerun the code. But the same bug still persisted. Later I tried applying breakpoint at the point of Mousewheel event operation.To my surprise the code execution never stooped at the Breakepoint. What even worse happened was, though I comment the whole mousewheel event code of picturebox, the operation still executes on mouse wheel rotation as if it was what hard coded.
I have a custom control I've created, and I'd like to be able to step through it (either in a test application or the one it's being used in). Is there a way to do this?
I recently made some obvious changes to one of my programs (added a few buttons, etc), and when I start debugging, it goes back and uses an earlier version before I made the changes.
I'm reading in an xml file, which is working fine with no problems, but I want to re-format one of the elements data attributes slightly.
The XML attribute output is currently Wind: NW at 6 mph
What I want to do is extract just the number from the string, I figured an easy way would be to simply play with the length of the string and assign it to another variable.
However, I've ran into a little problem.
I can use windRtrim = wind.Substring(0, wind.Length - 4) (Where windRtrim is the amended string variable and wind is the string from above)
This returns Wind: NW at 6
Which is great, but the problem now is trimming the correct number of characters from the beginning of the string as it'll be different if the number were to go over 9 (ie. 10 and above)
I have a form that creates an instance of a New Class. The code is simple so there is no issues with the programming.
I can step through the code on the Main Form without issues. Stepping Into moves from 1 line to the next.
I can't seem to debug the code within the class though. I set breakpoints but "stepping into" doesn't work. The code gets executed, but it doesn't step through each instruction.
I've tried changing many of the options within Tools > Debug with no luck.
I've tried deleting files from bindebug and obdebug.
I have a small problem, When i Start Debugging my program a lot of windows popping up such as: Watch 1 - 4, Memory 1 - 4,Autos And Registers. What should I turn off to make them stop popping on debugging?
I created a slideshow application for 4 monitors, with diferent folder for each screen images source.It has several transition effects and time schedule. It works superb when I am in VB Studio, developing, testing, etc.When I Build it, and play it work fine. But If I try the EXE file out VB environment, it work aprox 10 secs and "disaapears" from the screen, as if somebody press "QUIT"..I can't get any error or message from windows or VB.Again if I open the solution in VB it runs perfect.
When I run a certain project from within the IDE and an error would come up (just any error, like dividing by 0), it won't jump into the IDE showing me the line where the error occured, but the program is simply ended and I am back in the IDE!.With any other project that is not the case. I cannot work further on this project with this problem. Of course I did a PC restart, but that didn't solve it.
I need some help importing data from Excel 2003 into VB10. My goal is to import the data and save it to a 2D array for later use within the application. The data is on sheet 1 of the workbook and goes from A1 to D1072 with a header row. I have done a lot of research on line to find a solution but have been unsuccessful. From what I have found I have put the following code together. When I complile and run the program I get the following errors.
1) I think while compiling it gives me this error: The source file is different from when the module was built.
2) While running the program it stops on the connect.Open() and has this error OleDbException not handled. Could not find installable ISAM.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click ' Import float volume data from Excel
Due to my FTP server not liking to upload .exe files in order to get my auto updater to work i have to rename the folder .file before i upload
after this is downloaded i need it to check the application folder for any files ending with ".file" and if it finds any to remove the ".file" so that it is just .exe[code]...
I get this message whenever I'm trying to debug using VB.NET 2008 Express: Step into: Stepping over property 'ReadTnsNames.ClassTnsNames.set_Name'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
I am working in vb express 2008. I got some sample code from the site www.vbhelper.com and tried to implement it as it is. Debugging of the code gave following errors:Error 1 'Protected Overrides Sub Dispose(disposing As Boolean)' has multiple definitions with identical signatures.
C:Documents and SettingsDaLicaRestaurantLocal SettingsApplication DataTemporary ProjectsPrintingForm1.Designer.vb 7 29 Printing
I am dealing with a situation which I do not understand why the loop never ends. I have attached this example. I do not know what I am doing wrong.I have 8 x 8 array of integers (TheConnectionsValue (7,7))
I wrote a program using VB 2008 Express Edition and noticed that when I close the program (by clicking the "X" top right corner), sometimes the program is still showing in processes within Task Manager.What do I need to include in my programming to make sure this does not occur - i.e. make sure the process ends when I exit the program?
I have a text file which is about 700MB it is very difficult to open this file but there are 5800 Chapters in the file every chapter is starting from "$$NEW$$" For example [code]I want to split the text file after every chapter ends any idea ?
Going from VB6 to VB10 I find VB10 has much easier ways of doing things, like getting command line arguments, getting all subfolders, etc, the hardest part is knowing what commands to use. Is there a better way to detect if a string ends with certain text? I'm doing it like this....