I recently made some obvious changes to one of my programs (added a few buttons, etc), and when I start debugging, it goes back and uses an earlier version before I made the changes.
View 3 RepliesI type in the following
Dim anInteger As Integer = 42
Dim aSingle As Single = 39.34567
Dim aString As String = "I like Candy"
Dim aBoolean As Boolean = True[code]...
is missing. Please build the project and retry, or set the OutputPath and AssemblyName properties appropriately to point at the correct location for the target assembly.
I know I can do the following to prevent debugger from entering into Subroutine[code]...
Is there a way to do similar thing for a property that looks like this?[code]...
I'm having to write a reporting application that gets information from some Interbase servers and it also has to work on Vista as well as XP, I'm using to connect Borlands Data Provider.[code]My Issue is that debugging on my xp Machine the dataset gets filled, debugging on my vista box it fails ("Interbase provider initialization failed"), my initial thought was that this could be UAC related but I've compiled the application and 'ran as admin' and still same issue. (by the way it failes on the line Dim da as BdpDataAdapter...)
View 1 RepliesI have a dot net activeX control. using the code below my VB 6 application is able to load the control but the "ObjectEvent" method is never called event when raise event is called within the dot net control[code]...
View 3 RepliesI have a program that when you set it as the default program for opening rtf files, and open the file, not from the program, but from windows. It doesn't open it at all. It launches my program but, the file doesn't open in my richtext box.
View 1 RepliesI've built a windows form application that steps through a wafer map and sends a command to ink specific dies if the bin number is between certain values. While debugging I have run into an issue with the program crashing with no error message anywhere. While stepping through my code, the place the program stops has occured in two different places but both in the same subroutine in the code I use for the network communications. Below is the subroutine I've seen it break on with the two places it has broke indicated.
Private Sub EventHandler(ByVal Args As EventArgs)
Select Case Args.EventP
Case EventPointer.Connected
RaiseEvent Connected()
[code]....
I wonder what the code in vb 2008 express edition I have to put, so you can enterdata in listbox, after purification?
View 1 RepliesMy program hangs during debugging at a breakpont set at a subroutine call. It hangs on breakpoints anywhere inside the subroutine also. But does not hang otherwise at other locations where I have set breakpoints.
[Code]...
I am trying to create a new library (.dll) for use in my SSIS project. I dont have any prior experience of creating these kind of projects. So please bear with me.
When I try to debug the program, it throws the following error
What would be the best way to debug the following code. I know that it maybe wrong, but I am trying to learn this.
CODE:
I am transmitting data over an IP socket and receiving the data via a second program I have written. The server was in VB6 and am now creating a new one in vb.net to run as a service. The major issue I am having is related to the encoding features.
Issue 1 to be able to correctly encode a bytearray so that when it is received by a VB6 program via winsock that the data will be in the proper ANSI format for the pc to read it correctly. So far this works on some files and not on others depending on the content of the file.
Issue 2 to be able to correctly encode a bytearray, send it to a vb.net host program and correctly [decode?] write it to disk.
To make things a little more complicated I must also be able to do this where the client resides on a Windows Mobile, Windows CE, or Windows PC. I have been running some tests and have gotten mixed results.
Below is my code, I dont know why it is not working. I was trying something very simple because i am not familiar with coding in script editor, i have always done it in VB express. Every time i click the command button nothing is happending. What am i doing wrong? Sub CommandButton1_Click()
[Code]...
I've been using a piece of code I found that reads in joystick movement into my VB application using DirectInput. Building an executable works great, the program operates as should be, however when I publish my program for final deployment, I get the following error:
"WindowsApplication has encountered a problem and needs to close. We are sorry for the inconvenience."
Here's some of the error details:
EventType : clr20r3 P1 : windowsapplication.exe P2 : 1.0.0.0
P3 : 4c0f1ae6 P4 : microsoft.visualbasic P5 : 10.0.0.0 P6 : 4ba2183b
P7 : 88 P8 : 8 P9 : system.io.fileloadexception
And then a second error pops up shortly after:
AppName: windowsapplication.exe AppVer: 1.0.0.0 AppStamp:4c0f1ae6
ModName: kernel32.dll ModVer: 5.1.2600.5781 ModStamp:49c4f482
fDebug: 0 Offset: 00012afb
The errors only occur once I try installing the program and just before the application loads.Here's the code for the program:
Imports System
Imports System.Windows.Forms
Imports Microsoft.DirectX.DirectInput
Imports Microsoft.DirectX
[code]....
I just got Windows 7, so I re-installed VB 2008 Express and have been met with some weird issues. One of which is when my program is running it used to break on a line where an error was occurring and tell what it was and let me fix it and continue. So I can see the error in the Immediate window but why is it not breaking on the line? It just continues loading the program. Is there a setting I'm missing?
View 4 RepliesI'm trying to create a program which will calculate the Fibonacci Sequence which calculates the numbers correctly however, there are a few problems.
1. When using a Do While...Loop the program becomes non responsive.
2. Kind of dealing with the program becoming non responsive; I am unable to stop the process by forcing the sub to Exit.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Operation.Text = "Calculating...."
EStop = False
[CODE]...
I need some help on telling the program how to check if user typed the text article shown correctly word by word as they are typing. I've tried
Usertypehere.Text = Articleshown.text
But the program only consider the user to type correctly if they finished typing the whole article.
I want to step through VB.net 2008 project file. The code is executed from the postbuild command line. Thus this code is really executed during the build process.Thus, can you tell me when I can do to debug this VB.net 2008 program that is executed from the command line? All I know what to do is have the solution (ide) open, set breakpoints, set the project as the startup file, and run the debugger.
View 3 RepliesWhile reading about Visual Studio 2010 I`ve read that it has a possibility to begug only small pieces of code (eg. Functions, Subs). Is it possible to debug only one function in VS 2008?
I use Express Editions of VS2008, but maybe standard or Pro version has such functions?
PROJECT TYPE: Windows Forms Application
LANGUAGE: Visual Basic
.NET VERSION: 3.5
IDE: Visual Studio 2008
OPTION STRICT: on
OPTION EXPLICIT: ON
I am attempting to teach myself VB and write a parental control application at the same time, so my learning curve is rather steep. However, I have managed to complete the design of the application with no design time errors, and to my untrained eye, all my code looks like it should work. Unfortunately, when I attempt to debug the thing, it returns an error that looks like Greek to me. I have traced to line numbers I found mentioned in it, but I couldn't find anything wrong. I just need someone to point me to the part of my code that isn't working, and maybe give me an idea of how to improve it.
The project consists of 3 forms: MainForm, WarningForm, and AboutForm. The 1st and 3rd are self explanatory, the 2nd is simply a message popping up telling the windows user that they have 10 minutes before they will be logged off of windows. I cannot imaging why any of the codes on the 2nd or 3rd forms should be causing this issue since they don't activate until either a button is pushed (AboutForm) or after a certain number of hours has elapsed (WarningForm). So unless someone feels that it would be helpful, I won't post those on here.
[Code]...
I 'm having no trouble coding, I'm back to my initial printing problems. The program printed Avery labels in a variety of sizes. I created the label templates on 8.5 x 11 forms and then printed the forms. This cannot be done in VB 2008 for a variety of reasons:
1) The form size cannot be larger than the screen size I got around this by creating a new form class that matched my dimensions.
2) printform only does screen shots. This was a major barrier. First of all I can't get printform to print my custom form because it's not a member of system.window.forms.form, it's a class in system.window.forms.usercontrol. However, even if it was in the correct class, it wouldn't work correctly because printform in VB.net, does a screen capture of the form and then reduces the image on the printout.
So that is my dilema. I do not know how to use the reporting tool, but I can see that it must be binded to a database. Although my application does use a database, I want to be able to massage the data before printing it. And the application does more than just print labels. There are also custom reports that need to be printed.
I'm building an application that outputs a list of usernames to an HTML document. I'm using this to generate a string:
For y As Int16 = 0 To intBuddyList - 1
strBuddyListHTML = strBuddyListHTML & strBuddyList(y) & "<br />"
Next
The resulting string is then put into an HTML document. The problem is, when I load the document, the brackets are displayed literally. When I view the source, I see this:
buddy1<br />buddy2<br />buddy3<br />buddy4<br />tbuddy5<br />tbuddy6<br />
Is there a way to preserve the brackets in the HTML tags?
I have a block of code that has a test for a variable I use. The Code doesn't respond correctly when the variable Cph which is declared as a double is at 4.2.
HTML
If Cph < 4.1 Then
ElseIf Cph >= 4.1 And Cph < 4.2 Then
[code]....
i run vb.net 2008 in windows 7 (Greek), when i am using the debbuger in vb.net 2008 the messages that i get are in greek (translated from english). i suppose that happens because my operating system is greek, so my question is if there is any way to set up in vb.net 2008 to get messages or warnings in english?
View 2 RepliesWhen I try to debug my program, it sometimes catches the first breakpoint, but as I step into each step, it just skips and runs the program. Is there some kind of setting that I can make in vb 2008 express that will allow me to see my code step-by-step?
View 9 RepliesI have the most puzzling problem with VS2008 in regards to debugging my programs. Until recently I have been coding in VS2010 but due to some other system requirements with my work issued PC I have moved back to VS2008.All apps I developed in VS2010 always have and continue to debug as expected. However, any app I write in VS 2008 and try to debug, the application immediately ends before the first form is loaded. Again, if I run the same code in VS2010 I have no problems. I did notice the other day that if I debug without being connected to my corporate network, I can debug in VS2008 just fine.
View 7 Repliesincluding the runtime error message I receive that keeps killing my application. I am about to pull my hair out because I cannot find anything wrong with the code, and I do not get the error when debugging the application in VB! Basically a user enters some medical information on a form in text boxes and adds some medical conditons and medications into two listbox controls on the form, on for medical problems and one for medications they are on. When Button1 (command button) is clicked, it calls a subroutine stored in a module1. Then the application throws and Index out of Bounds error and crashes, losing all information that was entered. Here is the code on Button1:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNext5.Click
Call Store_MedData
End Sub
Here is the code for Store_MedData in the module. The error occurs on red text:
Dim ClientLastName as string, ClientMI as String, ClientFirstName as string, ClientAddress as String, _
ClientAddress2 as String, ClientCity as String, ClientState as String, ClientZip as String, ClientDOB as String, _
ClientBloodType as String,ClientActiveMeds(frmmain.lstActiveMeds.Items.Count - 1) As String, _
ClientActiveMedProbs(frmmain.lstActiveMedProbs.Items.Count - 1) as String
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. The application is being run on a PC running Windows Vista Home Premium w/ SP1. (aka. Windows "Worthless Edition")
In my code I had coded Mousewheel event for Picturebox. Then later i observed there was a bug in the part of the code which needed o be corrected.Then i corrected the code and tried to rerun the code. But the same bug still persisted. Later I tried applying breakpoint at the point of Mousewheel event operation.To my surprise the code execution never stooped at the Breakepoint.
What even worse happened was, though I comment the whole mousewheel event code of picturebox, the operation still executes on mouse wheel rotation as if it was what hard coded.
I have a custom control I've created, and I'd like to be able to step through it (either in a test application or the one it's being used in). Is there a way to do this?
View 1 Replies[[code]I have this issue where most of the rows in the table do not fill in the data to textbox2 and any edits made in the text box when this happens do not commit to the underlying datasource.When scrolling down and back up the datarepeater different records seem to be shown each time the data on the left is correct in the standard DGV ... it's just the data repeater that doesn't work.
View 1 RepliesI am having problems disposing of a image thats stored in a 'DataGridViewImageColumn' . When i try and delete the image the 1st one works then the 2nd time its used i get a 'System.IO.IOException: The process cannot access the file 'x' because it is being used by another process'. How do i solve this problem? i am disposing of the image before i try and delete it but yet its still not working:
PS - I have searched the forums / google for a suitable answer and cant find one
[Code]...