VS 2008 Getting Errors When Debugging?
Jul 19, 2011
PROJECT TYPE: Windows Forms Application
LANGUAGE: Visual Basic
.NET VERSION: 3.5
IDE: Visual Studio 2008
OPTION STRICT: on
OPTION EXPLICIT: ON
I am attempting to teach myself VB and write a parental control application at the same time, so my learning curve is rather steep. However, I have managed to complete the design of the application with no design time errors, and to my untrained eye, all my code looks like it should work. Unfortunately, when I attempt to debug the thing, it returns an error that looks like Greek to me. I have traced to line numbers I found mentioned in it, but I couldn't find anything wrong. I just need someone to point me to the part of my code that isn't working, and maybe give me an idea of how to improve it.
The project consists of 3 forms: MainForm, WarningForm, and AboutForm. The 1st and 3rd are self explanatory, the 2nd is simply a message popping up telling the windows user that they have 10 minutes before they will be logged off of windows. I cannot imaging why any of the codes on the 2nd or 3rd forms should be causing this issue since they don't activate until either a button is pushed (AboutForm) or after a certain number of hours has elapsed (WarningForm). So unless someone feels that it would be helpful, I won't post those on here.
[Code]...
View 14 Replies
ADVERTISEMENT
Aug 3, 2009
I have code that has no output, it doesn't do what i want it to do, but i can't see any errors in it, there are also no errors in the compiler, but in debug mode there are the following errors:[code]
View 2 Replies
Jan 6, 2009
I have code that has no output, it doesn't do what i want it to do, but i can't see any errors in it, there are also no errors in the compiler, but in debug mode there are the following errors:
A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
A first chance exception of type 'System.InvalidOperationException' occurred in
[code].....
View 3 Replies
Feb 22, 2012
I've built a windows form application that steps through a wafer map and sends a command to ink specific dies if the bin number is between certain values. While debugging I have run into an issue with the program crashing with no error message anywhere. While stepping through my code, the place the program stops has occured in two different places but both in the same subroutine in the code I use for the network communications. Below is the subroutine I've seen it break on with the two places it has broke indicated.
Private Sub EventHandler(ByVal Args As EventArgs)
Select Case Args.EventP
Case EventPointer.Connected
RaiseEvent Connected()
[code]....
View 2 Replies
Feb 23, 2010
I have an VB ASP.NET (.aspx) file that has deeply nested logic and I'm getting lots of build errors like "If must end with a matching End If" and "Do must end with a matching Loop". How do I begin to debug this beast to at least get it to build?
View 3 Replies
May 1, 2009
I'm having to write a reporting application that gets information from some Interbase servers and it also has to work on Vista as well as XP, I'm using to connect Borlands Data Provider.[code]My Issue is that debugging on my xp Machine the dataset gets filled, debugging on my vista box it fails ("Interbase provider initialization failed"), my initial thought was that this could be UAC related but I've compiled the application and 'ran as admin' and still same issue. (by the way it failes on the line Dim da as BdpDataAdapter...)
View 1 Replies
Sep 2, 2010
I want to step through VB.net 2008 project file. The code is executed from the postbuild command line. Thus this code is really executed during the build process.Thus, can you tell me when I can do to debug this VB.net 2008 program that is executed from the command line? All I know what to do is have the solution (ide) open, set breakpoints, set the project as the startup file, and run the debugger.
View 3 Replies
May 1, 2011
While reading about Visual Studio 2010 I`ve read that it has a possibility to begug only small pieces of code (eg. Functions, Subs). Is it possible to debug only one function in VS 2008?
I use Express Editions of VS2008, but maybe standard or Pro version has such functions?
View 5 Replies
Apr 26, 2011
i run vb.net 2008 in windows 7 (Greek), when i am using the debbuger in vb.net 2008 the messages that i get are in greek (translated from english). i suppose that happens because my operating system is greek, so my question is if there is any way to set up in vb.net 2008 to get messages or warnings in english?
View 2 Replies
Jun 4, 2009
When I try to debug my program, it sometimes catches the first breakpoint, but as I step into each step, it just skips and runs the program. Is there some kind of setting that I can make in vb 2008 express that will allow me to see my code step-by-step?
View 9 Replies
Sep 9, 2011
I have the most puzzling problem with VS2008 in regards to debugging my programs. Until recently I have been coding in VS2010 but due to some other system requirements with my work issued PC I have moved back to VS2008.All apps I developed in VS2010 always have and continue to debug as expected. However, any app I write in VS 2008 and try to debug, the application immediately ends before the first form is loaded. Again, if I run the same code in VS2010 I have no problems. I did notice the other day that if I debug without being connected to my corporate network, I can debug in VS2008 just fine.
View 7 Replies
May 9, 2009
including the runtime error message I receive that keeps killing my application. I am about to pull my hair out because I cannot find anything wrong with the code, and I do not get the error when debugging the application in VB! Basically a user enters some medical information on a form in text boxes and adds some medical conditons and medications into two listbox controls on the form, on for medical problems and one for medications they are on. When Button1 (command button) is clicked, it calls a subroutine stored in a module1. Then the application throws and Index out of Bounds error and crashes, losing all information that was entered. Here is the code on Button1:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNext5.Click
Call Store_MedData
End Sub
Here is the code for Store_MedData in the module. The error occurs on red text:
Dim ClientLastName as string, ClientMI as String, ClientFirstName as string, ClientAddress as String, _
ClientAddress2 as String, ClientCity as String, ClientState as String, ClientZip as String, ClientDOB as String, _
ClientBloodType as String,ClientActiveMeds(frmmain.lstActiveMeds.Items.Count - 1) As String, _
ClientActiveMedProbs(frmmain.lstActiveMedProbs.Items.Count - 1) as String
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. The application is being run on a PC running Windows Vista Home Premium w/ SP1. (aka. Windows "Worthless Edition")
View 9 Replies
Jul 30, 2011
In my code I had coded Mousewheel event for Picturebox. Then later i observed there was a bug in the part of the code which needed o be corrected.Then i corrected the code and tried to rerun the code. But the same bug still persisted. Later I tried applying breakpoint at the point of Mousewheel event operation.To my surprise the code execution never stooped at the Breakepoint.
What even worse happened was, though I comment the whole mousewheel event code of picturebox, the operation still executes on mouse wheel rotation as if it was what hard coded.
View 3 Replies
Jan 5, 2012
I have a custom control I've created, and I'd like to be able to step through it (either in a test application or the one it's being used in). Is there a way to do this?
View 1 Replies
Apr 11, 2010
I recently made some obvious changes to one of my programs (added a few buttons, etc), and when I start debugging, it goes back and uses an earlier version before I made the changes.
View 3 Replies
Sep 23, 2011
I have a .net application that uses customerrors web.config module to display meaningful messages for errors. It works without any issues for 500 errors/exceptions caused by non-ajax and ajax components (updatepanel). However, in a scenario where updatepanel's asynchronous request times out, there is no error raised at all. I was able to see the timeout in firebug and come up with a solution that would at least display the error message as an alert and then redirect the user to the 500 error page using javascript but it's not quite doing what the rest of the application does in case of an unhandled errors like these. I basically just want everything to go through "LogEvent" mechanism so based on the severity of the error, it does the necessary work.This 500 error page doesn't have anything in the Server.GetLastError() for these timeout scenarios. Is this an expected behaviour? Can it be changed so I do have access to these timeouts in Server.GetLastError() OR maybe just run this error through "LogEvent" mechanism? Is there a better/more graceful way to handle this issue?
Below is my code to give you an idea, not exactly what I have in my application but pretty close.
Web.Config
<customErrors mode="On" defaultRedirect="~/Errors/ErrorUnknown.aspx" redirectMode="ResponseRewrite">
<error statusCode="500" redirect="~/Errors/Error500.aspx" />
</customErrors>
[code]....
View 1 Replies
Dec 8, 2009
I have a form that creates an instance of a New Class. The code is simple so there is no issues with the programming.
I can step through the code on the Main Form without issues. Stepping Into moves from 1 line to the next.
I can't seem to debug the code within the class though. I set breakpoints but "stepping into" doesn't work. The code gets executed, but it doesn't step through each instruction.
I've tried changing many of the options within Tools > Debug with no luck.
I've tried deleting files from bindebug and obdebug.
Not being able to debug my programs.
View 6 Replies
Jul 6, 2009
I have a small problem, When i Start Debugging my program a lot of windows popping up such as: Watch 1 - 4, Memory 1 - 4,Autos And Registers. What should I turn off to make them stop popping on debugging?
View 4 Replies
Apr 2, 2009
I get this message whenever I'm trying to debug using VB.NET 2008 Express: Step into: Stepping over property 'ReadTnsNames.ClassTnsNames.set_Name'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
[Code]...
View 6 Replies
Dec 1, 2009
I am working in vb express 2008. I got some sample code from the site www.vbhelper.com and tried to implement it as it is. Debugging of the code gave following errors:Error 1 'Protected Overrides Sub Dispose(disposing As Boolean)' has multiple definitions with identical signatures.
C:Documents and SettingsDaLicaRestaurantLocal SettingsApplication DataTemporary ProjectsPrintingForm1.Designer.vb 7 29 Printing
[code]...
View 4 Replies
Feb 19, 2010
I have a windows 7 computer with vb 2008 express on it. it works really well, except only one thing. when I try to debug an application ( usually windows forms), it produces a run-time error saying: Error while trying to run project; unable to start debugging.
View 2 Replies
Mar 16, 2009
I am working on a project for school and I am encountering several errors in my code relating to the numeric up down boxes I have in the application. I have inserted my code and the error list below. I'm sure that it is probably something really simply but I am learning the language on my own and I am a little stumped here.
View 18 Replies
May 7, 2010
I converted vb6 project to vb.net 2008 but I got some error first one :Name 'VarPtr' is not declared.I got this one two times :Value of type 'Projectname.Func.EXPLICIT_ACCESS' cannot be converted to 'String'.
View 9 Replies
Sep 16, 2011
I'm running VB2008 on Windows 7; I've written out a ver simple piece of code:
Option
Explicit
On
Module
[code]....
When I run or debug the code, it asks for the First Number and then just completes the running of the program without asking for the second number and uses some random number. The console.readline() doesn't work either, the console window just disappears.
View 2 Replies
Nov 21, 2009
I get this error every time I try to debug.But, I do not know how to fix it or why it started occurring.
View 1 Replies
Dec 13, 2009
I have developed a contact's manager in VB.net 2008, the program works fine on desktop's but when I try using it on a laptop I get this error message:
microsoft.visualbasic.powerpacks.vs, version=9.0.0.0, culture=neutral,publickeytoken=b03f5f7f11d50a3a
View 1 Replies
Mar 27, 2010
I can't figure out how to get VS to break only on unhandled errors. I've tried this checking the "User-unhandled" box and unchecking the "Thrown" box for "Common Language Run-time Exceptions" and I've tried checking both boxes, and I've tried checking only the "Thrown" box, and I've tried unchecking both boxes.VS either completely ignores all run-time exceptions or breaks on both handled and unhandled run-time exceptions. Is my VS 2008 IDE broken or am I missing something?
View 5 Replies
Jan 12, 2010
Is there a way to catch ALL errors of the program?
Purpose: The idea is to catch all the errors of the program, load errorform which basically just says "A Error Was Detected" (Which I have already designed). Then send a web request to a formmail.php file with the said error (which i have already done).
In short: I need a way to catch ALL errors, and get the error string that it gave.
View 3 Replies
Sep 28, 2009
I'm just curious as to which one of these 3 error syntaxes in the try/catch is right.
vb.net
try
Catch ex As Exception
MessageBox.Show(ex.Message.ToString())
MessageBox.Show(ex.Message)
[Code]...
View 7 Replies
Apr 17, 2010
I was trying to make a calculator which takes the amont of copies you want to make and it tells you the cost. Then you type in the amount you want to enter and if its less a message box comes up saying "please enter more money". I've had a few problems
1. when i use formatcurrency the program crashes for no apparent reason
2. if i calculate cost without entering any copies then it crashes (ive tried putting a msgbox in but it crashes anyway)
3. if i get the msgbox to come up saying "Please enter more money" i had to remove the formatcorrency tag.
View 9 Replies
