My program's code is getting a bit jumbled with all the subroutines for button clicks, etc. I want to move them into a more manageable set of modules, but I get the following compile error:
Quote:
Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
For each event. Clearly I have to define a WithEvents variable, but I have no idea how or where to.
I've an app that starts to work from a module wich should load a form an do other things with a class library who raise an event an the form shoud cath it. The problem is that applicarion.run(frmMain) displays the form in the same thread the the code stops work while the form is open. And I need that the app works in this way because the user need to send files to the app using args and this avoid that the app init another instance of it (in other code) and update the form with the info when the event is raised.
[Code]....
is there any way i can send mouse click's in my program without having it move my Cursor ?
View 4 RepliesAnyways, after thorough researching as much about context menu, I have tried to do a left and right click context menu, including the events that will happen by opening the context menu. I wanted this to happen on a specific place, not the form itself (In this case, a picture).The left click context menu works fine, but when I try a right click context menu, the left click context menu will pop-up as soon as I release the right click button.[code]By using this code, I have a small nuisance of the right click event, where when released, it also uses the left click event. Any ideas of how to, well, stop it opening the left click menu when I release the right click button?Alternatively, I was thinking of using a mouse hover event to replace the right click event, but I'm not that advanced of a programmer.
View 9 RepliesI am trying to make a routine that will be called everytime the mouse button is clicked. I want it to be called so that the controls event that the mouse is clicked on is triggered.
For example:
You have a button control on your form. Instead of having the Button1_click event
You have a Control_click event. And that Control_Click event will be used for each control on the form.
I want a context menu strip to have 4 specific items. For testing purposes, we call them Item1, Item2, Item3, and Item4.I've set up a context menu strip like this, and I am using it for about 20 different controls. I want these four items to do different things based on what control the user right clicks. The only way I could think of doing this, was to make 20 context menu strips and create a click event for each item. This obviously, seems like a really bad way of doing it.Does anyone have any suggestions or another way of making the click events for the individual Items based on what control is right clicked?
View 6 Repliesi've a app that starts from a sub in a module, do a few things, and then load the form.
But it doesn't work :/
Here we execute dBase.AddTemporalFilepath
module.vb
Public dBase As New Core.clsDatabase
Public Sub Main()
FurBase.Directory = My.Application.Info.DirectoryPath
[Code].....
I've an app that starts to work from a module wich should load a form an do other things with a class library who raise an event an the form shoud cath it.The problem is that applicarion.run(frmMain) displays the form in the same thread the the code stops work while the form is open. And I need that the app works in this way because the user need to send files to the app using args and this avoid that the app init another instance of it (in other code) and update the form with the info when the event is raised.[code]
View 9 RepliesI am writing an Automation program to control an MS Acces applcation. Here is the sequence of events:
- Load MS Access Database (Done)
- Load an MS Access form (Done)
- Take dates from Main.VB and populate 2 fields in MS Access form (done)
- Load another MS Access form called Stage_2 (Done)
- Load a file name into a filed in the Stage_2 form (Done)
- Do a click event in MS Access linked to a button called Pre_Stage_copy on Stage_2 form (How do I do these?)
- Do a click event in MS Access linked to a button called Pre_Stage_import on Stage_2 form (How do I do these?)
I have a solution in Vb.NET 2008 windows Form with ToolStripMenuItems, but I need to implement menu navigation without any mouse intervention.I only found mouse events In ToolStripMenuItems, MenuStrip, etc.All MenuStrip and ToolStripMenuItems are created programatically, reading user permissions from Database, then add a handler to manage the events, but the client don't want mouse interaction, he wants only keyboard inputs only ![code]
View 2 RepliesI've been searching for the answer for a while but can't find it yet. Basically so far I have a simple VB.Net form with one button.I would like to make a class or module that can handle events from the main form. This is my code so far but it doesn't seem to work.
View 6 Repliesi have an event called startButton_click that runs when the startButton is clicked
i want to recall this method from another part in the code
startButton_click()
doesn't work
I have a module for commands and how would i check if a button was clicked because it does not work if i just past in the code when you clikc on a button?
View 18 RepliesI realy need to know this: I have a custom control that need to keep the keyboard focus at all time. But I also need to let the user to click some button and radio. So, is it possible to tell these control to preform their task without moving the focus away from the custom control. NB: I know that Menu and tool strip button dont move the focus, but my task is to eliminate the tool strip and provide a graphical interface
View 4 RepliesIs there a way to run a module in a form using a click event? I am trying to setup a easy user interface where when a button is clicked a module will run and generate information in a table.
View 3 RepliesI have to move the Cursor to certain X and Y position. I can locate the X,Y Position but the only problem I have is to activate the mouse click. I cannot do it.
Here is the code:
</Private Sub btnBrowseFile_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnBrowseFile.Click
Call MseMove()
Call MseClick()
[Code] .....
I am creating a game where on clicking the start button the object below it moves across the screen a bit further with each click of the button. I used VB at college way back in 2003 and am extremely rusty. I am guessing I have to change the X value of the Location property to make the Picture Box move horizontally across the screen, however I have had no luck so far!
View 7 RepliesI have 3 buttons 2 for browse (openfiledialog) and the other for move. I also have 2 textboxs that will say the directory of the file selected. So what I want to do is make one file move to another directory in the click of the move button.
View 14 RepliesIs there an event that fires in vb.net just before a contextMenuStrip appears when the user right clicks on a control? I need to be able to control the content of the contextMenuStrip just prior to the menu strip appearing. Basically I want to be able to change the content of the contextMenuStrip just before it appears.
View 1 RepliesI have an MDI running as the parent. How can you stop the forms moving to the back when they are open if you click in the any part of the MDI area. Also I notice if I have more than one form open it creates form instances on my windows task bar?
View 6 RepliesI believe I may have already posted a much longer explanation of this , but its driving me spare!!! I have several pieces of code that click buttons thru sendmessage commands, all the code works fine in Windows 7! But I put the app on WindowsXP and only some of the buttons will work,
[Code]...
What is the Coding for the double click event of data gridview and when it click will shown the data in to the textbox. for example in listview
with listview1.selecteditems(0)
textbox1.text=.subitems(1).text.
I have 3 click events in my form. I have delcared a string variable called sVariable in the following format: Public sVariable As String but when I try to use the value from the sVariable variable then it does not pass the value to the other click events. so in the Button1_Click event i type the following
[Code]...
First, I want to know if the mouse is in some area. Then, I want to check if the mouse holds the left click. I want to check as long as the left button is down, and I want to track the mouse's position. And finally, check when the left button is released.
So, in short, where should I start for tracking mouse events in my form?
How can I access the Click Events for a Webbrowser's ContextMenu? For example if I wanted to access each menu item in the ContextMenu?
View 3 RepliesI'm just wondering how I can make a custom button, but have it inherit the regular button? I just want to change the way it looks, and change the button hover/click events
View 3 RepliesI have a windows form that can search for data and the results are results are returned in a Datagridview. The Datagridview is bound to a custom datatable object. On the CellDoubleClick and CellContentDoubleClick events, a new form is supposed to open which will display the results of that row. What I am noticing is that the datagridview doesn't always fire when I immediately double-click on a particular row. It would appear that I have to first click on the row to "select" it, then double-click the row so the event will fire. Is there a way to remove this intermediate "select" step? Is there a property in the Datagridview that needs to be activated so the double-click events will fire right away? Does something possibly need to be done in another DatagridView event?
View 2 RepliesIs there a way to detect when a label is clicked without doing on click events for all the labels? I want to be able to detect the click, find what has been clicked, then I can change the label since I'll know which one has been clicked.
View 11 RepliesI have multiple textboxes which I want them to perform the same thing upon clicking them. By default I can use the handles textbox1.click for 1 single textbox as shown below but I am not sure how to do handle multiples of them. Of course I can write a handler for every single textbox but I have about 50 of them. I am sure there must be a more efficient way. [Code]
View 4 RepliesIs it possible to have multiple click events for a button based on the button text? In other words, if I change the button text can i create a new click event based on that text but use the same button?
for example:
button1.text starts as "steel"
button2.text starts as "brass"
If I click button1 then the text would change to:
button1.text="Stainless"
button2.text="Cold rolled"
If I click button1 again a string would then be added to a textbox and the process would start over again. can I have a different click event or would I need to put an If/Then or Select/Case in the sub to handle this? I have 10 buttons I would need to do this with and each needing at least 3 different choices for each depending on the previous button press.
