VS 2008 Project Says Built Successfully But Doesn't Write To Release Folder?

Jul 8, 2010

I developed a project is vb.net express 2008. Published it and the whole clickonce didn't work. Now I have Visual Studio 2008. I opened my project and have been working on it for weeks now. when I build it today it said biuld successful but the new .exe file etc have not been written to my Release folder.

View 20 Replies


ADVERTISEMENT

VS 2008 PDB And XML Keep Generating In Release Folder?

Nov 16, 2009

How can i stop it creating these 2 files i have turned off the option to generate the XML doc file under compile options and have None as the general debugging info and they keep reappearing in the release folder!

View 5 Replies

Assembly Becoming 32bit Specific When Built In Release Rather Than Debug In VS2008?

Jul 27, 2010

I am having a strange issue when building assembly's for one of my modules.I was getting errors when running on 64bit which I traced back to being related to the assembly being 32bit specific. Our modules are(or should) all be built to be bit agnostic.Running CorFlags.exe on the assembly showed the following.

Version : v2.0.50727
CLR Header: 2.5
PE : PE32

[code].....

View 2 Replies

.net - VB MySql AddWithValue Doesn't Pass The Value Successfully?

Jan 18, 2012

I have the following VB code.Dim cmd As New MySqlCommand("SELECT code FROM decoder WHERE ann_id = @aid", conn) cmd.Parameters.AddWithValue("@aid", 1)Dim reader As MySqlDataReader = cmd.ExecuteReader()

The reader.Read() then gives me nothing, however, if I replace the code by.Dim cmd As New MySqlCommand("SELECT code FROM decoder WHERE ann_id = 1", conn) Dim reader As MySqlDataReader = cmd.ExecuteReader() reader.Read() gives the correct result. Tried using Add instead, doesn't help. What am I missing here?

View 1 Replies

Determine If Network Folder Opened Successfully?

Nov 19, 2008

Since it will be run by the user I don't want the user to have to do anything but send the IT department the log file it creates.

What I want to do is see if a folder on the network can be opened successfully. I do not want to ping it, but actually open it and see if it loads. I can do this for a website by retrieving the http status code, but I can't find any references to something similar for explorer.exe. Here is a basic flowchart of this part of the program:

ping server --yes--> access \server_namefolder
--no--> access \server_IPfolder
--no--> Authentication Issue
--yes--> DNS Issue

Note also that just checking authentication won't work because it could also be a DNS problem. I guess I could check them both, but I would rather do it this way if possible (and I don't know how to go about checking either one)

View 1 Replies

IDE :: VS 2008 - Setup Project : Adding Folder Structure To The Program Files Folder?

May 13, 2009

I am using Visual Studio 2008 Setup project. I need to copy one folder and the sub folders into the program files but when I tried to copy or add the folder to "Application Folder" in File System editor, I am able to add only files and not folders.

View 1 Replies

Transfer A Form Successfully From One Project To Another?

Feb 28, 2010

How can i transfer a form successfully from one project to another without messing anything up ?

View 5 Replies

Control - Code - Failed In Successfully Converting The Project

Nov 14, 2011

I have found this amazing control that does exactly what I need, only problem, its in C#. Does anyone know of a VB version of this code? I've tried using converters, but all of them have failed in successfully converting the project. Maybe one of you guys knows how to convert it?

Anyway, here is the control: [URL]

View 2 Replies

Copy The Files From Release Folder To A Folder On The Server Erro "IO Exception The Device Is Not Ready"

Jan 18, 2011

I have developed a vb.net application which creates a csv file from database. When I run it from my system it works perfectly but when I copy the files from release folder to a folder on the server and runs the .exe file it give me IO Exception error. "The device is not readyť

[Code]...

View 2 Replies

VS 2005 Debug EXE Works - Doesn't Release

Mar 31, 2009

I am developing an application using Visual Basic .NET 2005. The application works fine in the PC which Im using to develop it. I make the setup.exe I install the application in other PC and the application doesnt work but it I replace the app.exe with the one in my debug folder it will work.

View 3 Replies

Asp.net - Making A Listview Sortable When It Doesn't Contain A Layouttemplate And Built In Codebehind

Sep 6, 2011

I have a page of checkboxes, I select a few of them, click submit, and go to a second page. on this page, I have a listview that is built using the checkboxes selected on the previous page. Now I'm wondering how i can add sortability to this listview.

In the past I would add CommandName='sort' CommandArgument='column' to the link on the header in the LayoutTemplate. But since my listview has it's header row outside of the listview, this doesn't seem to work. This is what I have so far:

<!-- header row (outside of listview, when I try to put it as a LayoutTemplate in listview i get an error, see below) -->
<table>

[Code]....

I've tried to add a templatelayout in the listview, but that gives me an error on the line that binds the data (listview.databind() ), i'm assuming because this isn't possible.

get a sortable header row on this listview?

View 1 Replies

Release Folder Not Working?

Jun 24, 2010

when i build my application there is no files in the release folder. I have set the application to compile into the release folder.

View 13 Replies

Prevent DLLs From Being Copied To Release Folder?

Jun 20, 2009

When I reference a DLL in my VB.net 2005 project, is there any way to prevent it from being copied to the projects release folder? I would just like it to use the dll were it is registered on the server.

View 2 Replies

Stop The XML File Generating In The Release Folder?

Aug 4, 2009

How can I stop the ProjectFile.xml file appearing every time I build my project file in the release folder?

View 3 Replies

VS 2010 Release Folder Empty After A Build

Dec 30, 2009

I've searched the VS settings and haven't discovered why the bin.Release folder is empty after a build. The bin.Debug folder output is normal. The same occurs with the obj.* folder.

View 4 Replies

VS 2008 FileStream Write Folder

May 24, 2011

can someone help explain to me how this code knows where to write the file too? I want to modify it to write another schema file to a different folder location [code]I need to write the 2nd schema to j:Solds folder but dont know how to get it to the folder it writes to just.[code]I know how to re-write this with streamWriter but I am looking to understand how this piece of code actually knows the location to write too

View 4 Replies

Project Not Working From Release & Debug

Sep 15, 2009

Im new to VB 08 and i made a project that runs fine when i debug from inside the VB solution explorer. When i go to my BIN folder and try to run my project, the project runs but the button event seems to be none exsisten, also my message box does not appear on load, it should give an ERROR message if it does not detect the process writen in the module.

View 3 Replies

VS 2010 Built-in Method For Stepping Back Through Folder Paths?

Jan 27, 2011

Is there a built-in method for stepping back through folder paths? Or a better way then what I'm doing? To go back two folder paths I'm doing it like this...

[Code]...

View 5 Replies

When Use Dll Imports In Project And Send The Built .exe Program?

Jun 17, 2011

When I use dll imports in my project and send the built .exe program to someone else,does he need to have the .dll file in his computer too?If he does, where should the .dll file be?-same folder as .exe programor- C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0

View 2 Replies

Work On A .NET Project Built On The 4.0 Framework In MonoDevelop?

Feb 9, 2012

I'm looking around and I "think" I'm reading conflicting statements about MonoDevelop's ability to support a VB.NET project. Some places say it's not possible yet, and other places say that you can with MonoDevelop V2.10... unfortunately I can't seem to find this elusive v2.10.

Do any of you know if this is currently possible (even if I have to install a beta)?

View 1 Replies

IDE :: Difference Between The Dll Or Exe File From The Debug Or Release Version Or Bin Or Object Folder

Jun 10, 2012

if you are debugging or releasing a projet , vs writes exe or bin files to the bin and obj folder in a release and debug version, are ther differences bewteen these files with the same name in 4 folders ?, eg myproject.exe

View 3 Replies

Sql - Branching Strategy For Release Based Db Project?

Dec 23, 2011

We have a asp.Net vb.net 2008 project on tfs2010. The project has one main branch and for any release we create a new feature branch which is finally deployed. Post production deployment we merge back the branch back into main branch.We are now also adding a db project to manage our SQL too. Question is how to version control the differential scripts. The db project contains all create scripts which is fine if we had to deploy thep project from scratch but the project is already live. So now any new release or hotfix would normally contain alter or change script practically.

View 1 Replies

VB Project Building In Debug Mode Even Though Release Is Set?

Mar 9, 2012

Both projects are set to build in release modeBoth projects are in the same solutionThe solution is set to build in releaseBoth projects output to a Release folder in bin / objEverything seems to be okay except for one thing.When inspecting the files with a tool such asI tracked this down to a setting in the Advnced Compiler Options for the pdb files.If the debug info output for VB is set to anything other than none - then the project builds in debug mode (keep in mind it still outputs to the release folder).

View 1 Replies

VS 2008 Cannot Delete Project Folder?

Jun 25, 2009

I'm using VS2008 and cannot to delete old project from windows explorer on the server. After press delete button I got message:Cannot delete ProjectName: It is being used by another person or program.

View 5 Replies

Using The Extensibility Project Template To Write An Add-in For SSMS 2008 R2?

Jun 17, 2010

I am trying to write an add-in into the SSMS 2008 R2 IDE. I believe it is possible, though maybe not fully supported by Microsoft. I have created a new project in Visual Studio 2010 of type Extensibility - Visual Studio Add-in. This has created my project and all of the relevant code to get the add-in loaded onto the Tools menu. The only line of code I have added is in the OnConnection method to display a messagebox so I know it has at least loaded.

When I build this as is, it will load as an Add-in into VS 2010 onto the Tools menu - which is fine - at least part is working. But when I try to add this as an Add-in into SSMS 2008 it keeps giving me the error message:The Add-in 'DataFollower.Connect' failed to load or cause an exception. Would you like to remove this add-in? ... Error Message: No such interface supported.

Below is a top half of the code in question. This code was created directly from the VS Add-in template - nothing has been altered. The error occurs on the line:

_applicationObject = CType(application, DTE2)

This is running on a Windows 7 64bit machine, SQL 2008 R2 64bit and VS 2010.

Imports System
Imports Microsoft.VisualStudio.CommandBars
Imports Extensibility
Imports EnvDTE

[code]....

View 1 Replies

.NET Window Based Project Built On .NET 3.5 Framework Is Not Working In Windows7 64 Bit System?

Jan 28, 2011

I have VB.NET Window based project built on .NET 3.5 Framework that is working on the Windows7 32 bit System but when I try to run this same application in Windows7 64 bit System it gives an error message: "System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)"

View 4 Replies

Cant Get My Program To Write Into A File That Is Several Folder Deeper Into The Bin Folder?

Apr 29, 2010

the first problem is getting my program to load rss feeds from other websites mostly here:http:[url..... im trying to load it using the webbrowser. i want the rss feed to load right onto the form. im positive that its possible. i have the imports system.net in my code already for xml documents.the second is i cant get my program to write into a file that is several folder deeper into the bin folder.[code]......

ive tried playing with the code moving around the folder names, making sure there capitals are correct, etc. but nothing works. it creates the file in the wrong spot.

View 14 Replies

Guitar Champion Final Release ! 2009 Share Your Project | Dream.In.Code?

Feb 28, 2009

Its finally done... post your impressions!Attached File(s) GH_Champion.zip (11.34K)Number of downloads: 35

View 7 Replies

Visual Studio 2008: No Build Events Folder On The Project Properties Page

Nov 23, 2010

I am using Visual Studio 2008 Professional to build a VB.NET console application. I have a text file that I want to copy to the output directory after a build. I would like to create a build event to do that, but I do not see a "Build Events" folder on the property page. Is there a setting where I can get this folder? Or, is there another way I can set up a post-build event to copy a file to the output directory? The folders I see on the Properties page:

[Code]...

View 1 Replies

File Copying From A Templates Folder To A Project Folder

Feb 24, 2010

What I'm trying to achieve is for a file to be copied from a templates folder to a project folder. The project folder path is constructed using the selected item in a combo box and a list box. [Code]

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved