I'm looking around and I "think" I'm reading conflicting statements about MonoDevelop's ability to support a VB.NET project. Some places say it's not possible yet, and other places say that you can with MonoDevelop V2.10... unfortunately I can't seem to find this elusive v2.10.
Do any of you know if this is currently possible (even if I have to install a beta)?
I have VB.NET Window based project built on .NET 3.5 Framework that is working on the Windows7 32 bit System but when I try to run this same application in Windows7 64 bit System it gives an error message: "System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)"
View 4 RepliesAfter installing Monobjc and playing around with the Monobjc Application Project under C# in MonoDevelop, I noticed that there is only an empty Monobjc project under the VB section.
Obviously this template adds all the correct references but doesn't add the basic files for the application to run. I've tried creating a class with:
Imports System
Imports Monobjc
Imports Monobjc.Cocoa
Class Application
[Code]...
Also if I add in a xib file from IB, how do I generate the designer code for the partial AppDelegate class?
I need all the dll's in the following format:
Dim references() As String = {"Reference1.dll", "Reference2.dll"}
but I don't know where to find the dll names.
After checking an Xps file i noticed that the string within the Xps file <> is converted to <>So is there any built-in function in the .Net framework that could do this job for me?If it does not exist what characters becides <> should i escape in myOwn function?
I try to implement a search within an xps file, but searching for <> instead of <> returns nothing.
UPDATE: At least i found the list here of xml document escape characters
I have a solution that I wish to upgrade from Vb.net framework 1.1 to framework 4.0. The solution consists of a number of projects, all but one of which compile to dll's. The master project compiles to a executable which provides a menuing system which dynamically loads the dll's and connects to entry points.
The projects contain normal classes, numbers of forms and also controls, which are either usercontrols or are inherited extensions of standard windows controls.There are a number of third party components (eg reporting and grid controls from Component One, Ribbon control from DevExpress etc).
[Code]...
When I use dll imports in my project and send the built .exe program to someone else,does he need to have the .dll file in his computer too?If he does, where should the .dll file be?-same folder as .exe programor- C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0
View 2 RepliesI developed a project is vb.net express 2008. Published it and the whole clickonce didn't work. Now I have Visual Studio 2008. I opened my project and have been working on it for weeks now. when I build it today it said biuld successful but the new .exe file etc have not been written to my Release folder.
View 20 RepliesIs the Compact Framework still in work? It's not in Beta2.
View 2 RepliesAbout what audio components are exposed by the .net framework?
Can I work with .wav files? What kind of things can I do with .wav files as far as vb .net is concerned? Can I record? What should I look for when looking for info for .net related audio at msdn. Where else can I find info on this?
Is it possible to immediately use code that is built in a dynamically built assembly?I would like to create an instance of an ENUM built using.http:[url]......
View 4 RepliesI've installed MonoDevelop 2.2b2 on my Windows workstation, which has the .NET 3.5 SDK installed and running fine (I can use VS Express and command-line compilation without a problem).Apparently MonoDevelop defaults to calling the Mono VB.NET compiler (vbcnc.exe) rather than the Microsoft compiler (vbc.exe) when building a project. (I haven't tried a C# project yet.)Is there a way to tell MonoDevelop to use the standard VB.NET compiler for .NET 3.5? I can't seem to find such an option anywhere in the application, solution, or project options.I like the MonoDevelop IDE (even better than SharpDevelop), but I'm not sold on installing and using Mono's compiler just yet, nor do I know if it can even handle the latest VB.NET / C# language features.
View 2 RepliesI am attempting to create MonoDevelop 2.8.6.4 Profile for Visual Studio 2010 (I could not find anyone else who had created 2.8 or newer). I uploaded the whole folder that I created to [URL] I saved the folder inside of:C:Program Files (x86)Reference AssembliesMicrosoftFramework.NETFrameworkv4.0Profile Here is the XML profile file I created:
[Code]...
I don't think this is possible but thought I'd just double check...
I have a class library project (i.e building this project results in a DLL being created) and I add a reference to this DLL in several of my other applications. This DLL project targets .NET Framework v2.0.
However, some of these apps that use the DLL target .NET 2.0 (or 3.5) and some target .NET 4.0. But because .NET 4.0 does not include 2.0 and 3.5 in it, its possible for someone to have .NET 4.0 installed but not .NET 2.0, therefore meaning that they won't be able to run my app because of the reference to a DLL that requires .NET 2.0.
So the solutions as far as I can see are: 1. Include .NET 2.0/3.5 as an additional prereq for my .NET 4.0 apps... ewww. 2. Create a copy of this DLL project and make it target .NET 4.0 then in my .NET 4.0 apps add a reference to that rather than the .NET 2.0 version.
So far I've been using the second option, which is working fine but its just very annoying having to remember to copy and paste any changes I make in one version of the DLL project into the other one.
So is there any way I can have a single DLL project but have it build 2 versions of the DLL, one targeting .NET 2.0/3.5 and one targeting .NET 4.0? As I've written this down I've just realised I could always build the solution, copy the DLL out to another folder, then change the target framework and build it again to get the new DLL but that's still not ideal.
Using VS 2010 Ultimate by the way in case that makes any difference to the options I've got available
I made a small program which i have sent to all users in my network. Unfortunately i forgot about older versions of framework.
Is there a quick and easy way to add older versions compatibility of framework to my project?
confirm the forum for this question about Visual Web Developer 2010 Express. I found a VWD Express forum, but it was in Spanish... Lo Siento. My issue is selecting a down-level, 3.5, framework version as I create a new project/website. I have figured out how to CHANGE the target framework version once the website/project is created. I have the 3.5x installed on the system and available. The articles I have seen discussing this issue, refer to a framework version selection drop list in the new project creation dialog/wizard. I do not have that option.
[Code]...
I've been passed a solution that has a vb.Net 2.0 project that references to a .Net 3.5 library. The library compiles with out problem but the vb project does not. It complains of missing objects which are in the library which are correctly added in the imports. Also I see a yellow yield sign next to the reference library also when I add the reference it complains of the framework version difference. Any help is apritiated. Also I'm using VS10. Imported the projects with no errors. A colleague has this working on VS9.
View 1 RepliesI want to start my project with a sub main by disabling the application framework. The problem is that if i do this then the application starts and then exits in a few moments. Is there a way which could hold it until the last form is closed.
View 7 RepliesI created a small application and an installer project for it. I can install and also run it, only thing htat i dont like is that during setup, it downloads .NET Framework 3.5 SP1 and this takes long sometimes. I want to have it on the installation CD later.
I have seen in the installer's detected dependencies, that there is the 3.5 framework contained and it has a InstallURL property = [URL]..I am a little confused about all the Framework stuff on this site - so just 3 simple questions:
1) which file exactly do i have to download,
2) where to put it and
3) what to write into the property InstallURL then? (Maybe needed to change also other properties)?
I'm using vb2008 with DB MSA2007 (save it to MSA2003) on Seven(7)System After I create my project I build it(make exe). then I took the file of project (application) and the DB from Debug Folder.
I tried to run this application with DB on another computer it's system is seven and MSA2007 and work very well. then I run it on pc it's system XP and MSA2003. it showed this error
Application Error THE APPLICATION FAILED TO INTIALIZE PROPERLY (0XC000135). Click on OK to terminate the application
Better Explaination of question: Is it possible to work on the same vb project at the same time?
I searched over google for help and I found a forum but it looked very complicated and I diden't feel like screw stuff p so can someone please give me a link or tell me how?
If i use custom images in my programs from my pc. After i publish this and give it to my friends they get errors due to them not having the images. How do i go about adding the images to the application or just generally how you resolve this?
View 7 RepliesI use a Vb 2008. I make connection with DB Ms Access2007. it show me this error couldn't find....... DBthen I change the DB Ms Access2007 to MS Access2003, and it works very well
View 9 RepliesI made a small windows project under visual studio 2010, It working perfectly with
windows 7 , when I tried to run it under XP didn't work :-(
what can I do to have it work in both windows 7 and windows XP , or at least to work under
I followed the Quartz manual to the dot and still I'm not sure why it isn't picking up the GetDeal.vb (Quartz job) in Global.asax. It never went into the _scheduler.JobGroupNames and _scheduler.TriggerGroupNames loop as follows:
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim factory As ISchedulerFactory = New StdSchedulerFactory()
_scheduler = factory.GetScheduler()
_scheduler.Start()
[CODE]...
I've attached a link to download my Project here. how to make it work?- [URL]
i would like some help with how to start with my FINAL YEAR project work dubbed "SCHOOL TRACKING SYSTEM" . I am so much lost on how it shoud be like and what to actually do.
View 2 RepliesI'm using Microsoft Visual Studio 9... Which uses Visual Studio 2008.I would like to re-work a previous project without changing the original to which end I'd like to make a copy of the original, with a different name obviously.
View 2 RepliesCan any body tell me why this simple paint project wont work.
View 1 Repliesi download subsonic 3 today (subsonic 3 preview 2) but this don't work in vb project.i think because .tt file (for generation) is C# template so this don't generate vb code.
View 1 RepliesHow can more than one programmer work on the same project at one time? is this possible? it surely must be possible??
View 2 Replies