I'm using Microsoft Visual Studio 9... Which uses Visual Studio 2008.I would like to re-work a previous project without changing the original to which end I'd like to make a copy of the original, with a different name obviously.
View 2 RepliesI made a bowling program, it adds 5 scores from 1 player and then calculates the average. Problem is with my reset button, when i click reset it doesn't change "Enter Bowling score for game #1" to 1, how do I change it to 1?
<code>
Public Class frmLab2
'This is a program calculates the average scores of 5 bowling games using array.
Dim scoreCount As Integer = 1
Dim intcount, total As Double
Dim i As Integer = 0
Dim arrscores(4) As Double
[Code] .....
How can i work with Next and Previous button, in VB6 with the help of record set it was quite easy, but in dot net i little bit confused, how to do it?
View 1 RepliesI'm making my Media Player in VB2008. I got Listbox1 as playlist. Buttons play and stop works, but buttons next and previous don't. What code i need to put for them?
View 4 Repliesi have worked on a culture switch control and i need to modify the ViewContext.RouteData("culture") to check if the view exists anyway when i do the following
Dim routeData As RouteData = ViewContext.RouteData
routeData.Values.Remove("culture")
routeData.Values.Add("culture", cultureValue)
then the original ViewContext.RouteData is changed when i change the routeData.I have tested to do the following to but no success
Dim tempViewContext As New ViewContext(ViewContext.Controller.ControllerContext, ViewContext.View, ViewContext.ViewData, ViewContext.TempData, ViewContext.Writer)
Dim routeData As RouteData = tempViewContext.RouteData
routeData.Values.Remove("culture")
routeData.Values.Add("culture", cultureValue)
how to copy the ViewContext to a temporary object and changing the values without changing the original ViewContext values?
Edit: The only way i know work is to change the routeData then check if it exists and after it change the routeData back to the original culture... was hopping there were a another way but it works for know.
I have a generic dictonary which is templated in the following manner:
[code...]
If I wanted to omit certain list items against arbitrary keys (that is the items that are in the list contained within the value part of each of the key value pairs making up the dictionary) given some arbitrary condition (lets say omitting list items where a list item contained the string "abc")
I would expect to able to create/project into a new dictionary which would contain entries which contained lists WITHOUT those items whose name contained "abc"
How do I achieve this using a Lambda expression?
I was trying something like this:
[code..]
is there any way to populate a listbox with totals data from previous pages? I'm working on a project for a class where the final form needs to have all the totals from the previous 3 pages (each page has one total each), in some capacity (so I do not necessarily need to use a listbox if there is an easier way to do this).One thing about the previous 3 forms, two are set up in radiobuttons and one is set up w/a checkbox format (but I will likely change the radiobuttons over to checkboxes as a later revision).I just can't figure out how to populate the listbox with info from a previous form, I keep thinking load events, but that doesn't take into account which options might be taken from previous forms.once the totals from the previous forms have been added to the final form I will need to add a 7% sales tax. I assume that something such an if then statement will take care of that though.Just wanted to run that everyone here at the forum just in case there is a better way to do that.
View 2 RepliesI am writing a program, and it worked just fine, then I changed the icon on the program and I get an error when I try to run the program. Attached is the window that I get when I debug the program.
View 3 RepliesIn Datagridview, Set as DatagridView1.ReadOnly=True,
Dgv1.Rows.Add()
When i tried to add a Row, it is copying previous Row data to new row,and also blank the previous row, why?Like Insert Row, Why...?
How does the last button work, heres my first, next, previous and last button codes"
next button:
[CODE]..................
previous button:
[CODE]..................
first button:
[CODE]..................
last button: *not working*
[CODE]..................
this could be an easy one but I can't seem to figure out how to do this. I have a solution with
three projects in it. The main folder is fine but I want to rename the folders for two of the
prodjects.how I can do this within .NET so my structure stays in tact?
I am using Visual Basic 2010 Express. I want to put an icon my Application to make it look better instead of the regular [IMG]C:Documents and SettingsJake EhrmanDesktoppost 1[/IMG]
I have the picture saved as an .ICO so i can insert it but i want it like this... [IMG]C:Documents and SettingsJake EhrmanDesktoppost 2[/IMG] how would i go about changing the icon for the project file?
I actually don't care so much about the name of the project as I do the .exe it builds. So I went into the project properties, goto the Application tab and change the Assembly name. But when I build, it loses the resources I've included. It builds w/o errors, but the icon's and pictures I've included are not in the program, and then the IDE gives me errors telling me it can't find those files.
I do have those resources in the program, their persistence is set to "Embedded in .resx" and their Build Action is set to "Resource". They work fine in the designer and show properly, and they build and show fine w/o changing the Assembly name.
I'm creating setup using VS2008 and I can able to create. The problem is the setup location is always c:program filesdefault company name.
I can rename that while installing. but, how can I change default company name while creating setup.
I need to change the encoding from Western European... to Unicode... for every file in the project. I do not want to have to check out, open, change encoding, save and check-in every file, is there a faster way?
View 10 RepliesI have a project that uses the asp chart control. The project was developed to use .net 4.0 but the server uses version 3.5. I changed the project to 3.5 but now my charts don't work.When I change it it tells me that system.web.DataVisualisation.dll will be removed.
View 1 RepliesI'm using vb2008 with DB MSA2007 (save it to MSA2003) on Seven(7)System After I create my project I build it(make exe). then I took the file of project (application) and the DB from Debug Folder.
I tried to run this application with DB on another computer it's system is seven and MSA2007 and work very well. then I run it on pc it's system XP and MSA2003. it showed this error
Application Error THE APPLICATION FAILED TO INTIALIZE PROPERLY (0XC000135). Click on OK to terminate the application
From my DLL project I have succeded in making AutoCAD launch by pressing F5 from VB.net IDE (Visual Studio 2008) en route to try to make debugging of the DLL easier ...
... however one last obstacle is currently in the way and the obstacle is that for some reason when I hit F5 and AutoCAD is launched my breakpoints are not recognized at all... and program runs from start to finish instead of allowing me to debug ...
It issues a strange message which says "The following module was built either with optimizations enabled or without debug information... to debug this module, change its project build configuration to Debug mode..." and it is all weird because as far as I know I am not in release mode .. but in debug mode (anyhow I am relatively new to Visual Studio .NET so I am thinking that my impression could be that I am in debug mode when in actuality I maybe in release mode)...
Here is why I think I am debug mode ...
1. From Solution explorer ... when I click on the Solution Name and view its properties ... the Active config property says Debug|Any CPU
2. When I look at the properties of the project and look at the compile tab it says that the Configuration is Active (Debug) and under Platform it says Active (Any CPU).
3. Under the Advanced Compile Options of Compile Tab from project properties ... Enable optimizations is UNchecked ...
Anyhow with all the settings mentioned above it seems that I have everything okay but then the message above proves otherwise ... and so at this point I know that I am still missing something ... like a setting somewhere... wondering what else do you think am I still missing?
As additional info...there are seven projects in the solution and it is the main one (the one that I set as startup project) whose properties I refer to in all the paragraphs above.
Better Explaination of question: Is it possible to work on the same vb project at the same time?
I searched over google for help and I found a forum but it looked very complicated and I diden't feel like screw stuff p so can someone please give me a link or tell me how?
If i use custom images in my programs from my pc. After i publish this and give it to my friends they get errors due to them not having the images. How do i go about adding the images to the application or just generally how you resolve this?
View 7 RepliesI use a Vb 2008. I make connection with DB Ms Access2007. it show me this error couldn't find....... DBthen I change the DB Ms Access2007 to MS Access2003, and it works very well
View 9 RepliesI made a small windows project under visual studio 2010, It working perfectly with
windows 7 , when I tried to run it under XP didn't work :-(
what can I do to have it work in both windows 7 and windows XP , or at least to work under
I followed the Quartz manual to the dot and still I'm not sure why it isn't picking up the GetDeal.vb (Quartz job) in Global.asax. It never went into the _scheduler.JobGroupNames and _scheduler.TriggerGroupNames loop as follows:
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim factory As ISchedulerFactory = New StdSchedulerFactory()
_scheduler = factory.GetScheduler()
_scheduler.Start()
[CODE]...
I've attached a link to download my Project here. how to make it work?- [URL]
i would like some help with how to start with my FINAL YEAR project work dubbed "SCHOOL TRACKING SYSTEM" . I am so much lost on how it shoud be like and what to actually do.
View 2 RepliesCan any body tell me why this simple paint project wont work.
View 1 Repliesi download subsonic 3 today (subsonic 3 preview 2) but this don't work in vb project.i think because .tt file (for generation) is C# template so this don't generate vb code.
View 1 RepliesHow can more than one programmer work on the same project at one time? is this possible? it surely must be possible??
View 2 RepliesI'm looking around and I "think" I'm reading conflicting statements about MonoDevelop's ability to support a VB.NET project. Some places say it's not possible yet, and other places say that you can with MonoDevelop V2.10... unfortunately I can't seem to find this elusive v2.10.
Do any of you know if this is currently possible (even if I have to install a beta)?
Have anyone worked on a project on 2 different computers with different version of Visual Studio Express?
In my case, I have made (and still working on..) a project in VSE2008, which I have installet at my job-computer.
At my homepc I have VSE2010 installed. I am a bit afraid to try working on that project from another version of the Visual Studio..
i am doing an internship for which i had to make a code in vb. i am using vb 2010 ultimate. the code is ready n bug free. it does what it is supposed to do on my system. how should i transfer it onto my mentor's system because he needs the code for day to day activities. his system has v1.something for .net framework. mine is v4.something.i have tried sending him exe file generated. didnt work due to the difference in versions of.net framework.then i read bout package and deployment wizard. vb 2010 ultimate doesnt have that wizard. i tried publishing it. gives me an error "WindowsApplication1 has stopped working." this is on my system and not my mentor's.
View 7 Replies