VS 2010 Create And Save Pdf File?
Apr 7, 2012I have a code (with printdocument) that prints the results of my calculation program. Can I use this code to create and save the results in pdf format?
View 1 RepliesI have a code (with printdocument) that prints the results of my calculation program. Can I use this code to create and save the results in pdf format?
View 1 RepliesOk so with my program i'm trying to create a save configuration I have it in my context menu so that I can click save configuration and what i want it to do is check to see what check boxes are checked and save those to a file (i.e. a notepad file or whatever works) that way I can save categories for customers or my own computer or whatever and than i'll just click load and choose the category I want and it will load the checkboxes that I want to install. I found a similar post but it's not really making sense to me. So i'm wondering what I need to do to make this work.
I'm also wondering how i'm going to load the configuration but I might have to wait on that one step at a time.
Link to Similar Post
What's in Green is what I want to select to save the checkboxes and the stuff in Red is the checkboxes i want it to save. I'd like to have it open a new box asking me what i'd like to save the configuration as and that save it...
How would I create a "Save File". I am creating a launcher and need it to save the programs and different texts i have on the program to a save file. One side question: How do I do Links in VS?...HyperLinks that is.
View 9 Repliesim trying to create a text file with some details that ive put into some text boxes.I got on screen
3 textboxes
2 buttons (which i would like to get their text from)and then 1 button to save details and exit.I got the coding place but i dont want a a dialogue box to come up i just want to save the stuf to a set folder location, will need to read the textfile to the same area, incase the user wants to change the data. Struggling to understand the my stream section in my books.
Dim saveFileDialog1 As New SaveFileDialog()
saveFileDialog1.Filter =
"txt files (*.txt)|*.txt|All files (*.*)|*.*"[code]......
With Button click i have to create dynamic 3 Labels in a Panel or panel. First Label show text from TextBox1. Second Label show text from TextBox2 And the last show date from DatetimePicker.
First problem: I have find some code to create one label but not 3 labels with different text each one. How to create this 3 different labels with different text? Each one under the previous. Second problem: When i create a label and close the form - Next time when i open again the form none label has saved. The Panel is clear. How to save that dynamic created labels?
how to create a panel full of items (textboxes, buttons, labels, ...) and save it as a class with all it's properties so I can create it and place as object on other panel. My goal is to create an application with menu on the side and change workspace (the part on the rest of the form) between 3 or more possible different "workspaces" (made by the classes).
View 5 RepliesMy web and sql db are on two different servers. I'm developing a component in my vb.net web app which uses sql dbmail to send mail. That part is already working but part of the requirement is to allow the users to add an attachment to their email. SQL dbmail requires an absolute path for the email attachment for example, in sql:Declare @Attachments nvarchar(max)
Select @Attachments = 'D:emp ewreport.pdf'So currently in my vb code I have the following:
[Code]...
how to create a save to text file method with a try catch in the method in a class and then call this save method from a button on a window form. I am currently doing the save method under the button directly but to tell you the truth i would prefer to just do it one time and call it from different locations in the various forms i have, then copying it all the time.
View 1 RepliesIs there anyway to save a thumbnail of an image, then save it so that, when viewed through My Computer, the thumbnail is displayed for the file. Basically, what I mean is to do something similar to the way you can see a preview of a pdf file, or Microsoft Word file, or Microsoft Expression Design file. I want to be able to open the file's containing folder, then switch to thumbnail view, and the thumbnail will be displayed as the image for the file.
View 5 RepliesI'm new to Visual Basic with no programming in my background. I've created a application without to many problems until now. I've looked around msdn but could not find any tutorial on how to create a "standard" save file dialog box. What I have found is some instruction with a lot of assumptions made such as I've done this before.
View 9 RepliesOne form of my program is Item Development it has simple questions like Physical propertys of item, name, roll in story,etc.. I want to save this form (Form1 and all of the external anwsers that are written in the textbox and the radiobuttons that are selected! Next question is to load that.... The code
[Code]....
I've been programming in VB6 for years, I have decided to take the plunge into VB.net and C# 2010 but having a little problem understanding the big picture.In VB6 I could create user controls and save them as .ocx files, then use those .ocx's in other programs or on html pages. I am sure the same idea is present in VS 2010, I'm just not seeing it.Can anyone recommend a book or tutorial that will show me the big picture of all the aspects of the .net environment?
View 2 RepliesI do one project in visual basic 2010.In visual basic 6 project can be make Package and deployment (setup file or install file) file using Package and deployment wizard.But in visual basic 2010 express edition does not have Package and deployment wizard.how to make Package and deployment (setup file or install file) file in visual basic 2010 project?
View 4 RepliesI need a better solution that what I am currently using, and not sure where to go from here.The program uses a scanner and scans documents into it. It uses a flat file (essentially a csv) to store data captured from the documents being scanned (each line in the file is one "document", with each value in the line being some piece of data from that document).
The scanner can scan up to 100 documents per minute, so it runs very fast.Currently, when a document is scanned in, the flat file is opened, a line written to it, then closed.It works for the most part, but sometimes i guess it's too fast for the IO operation, and some documents get completely missed. It will throw an error "error accessing file....". I assume this is because the file is still open from writing the last document to it.
Documents can be scanned at random, so they aren't always constantly scanning. It may scan 100 at a time now, then wait 10 minutes, and then scan one document.Database is not an option, per the specs of this program. It must be flat files. If theres a way to use a flat file like a database, that's cool. It doesn't have to be in CSV format.
It MUST be able to write to the file immediately after scanning. I worry about leaving the file open for writing constantly while the program is open because of a system failure or crash, the file may get corrupt or lost. That is not acceptable. It must be the best option for data recovery, should the computer crash or power go out, etc.
I need to create an application that is able to modify the XML elements value.I have an XML file which was created by another to be used for flash movie which has the following layout:
<?xml version="1.0" encoding="utf-8"?>
<games>
<game>
<gameName>Cowboy</gameName>
[code]....
As you can see there is this string "™" on <gd02>. My question is, whenever I save the file, the code changed to "TM" which is fine for most cases. But I need it to stay the same because apparently flash will not display the superscript "TM" if not using the code. How can I do this?
How do you save all the settings in a simple code; lets say you have a text box, a checkbox, and a listbox.
In the text box, it lets say you wrote hi
checkbox, you checked it off
listbox, you selected lets say HI from it.
How do you save the settings onto a file? Lets say a .cfg or whatever thats called file. Its like automatic, so that the cgf says lets say says:
NameofCheckBox=true
NameOfListBox=HI
NameOfTextBox=hi
Any way to do this stuff? I've seen some people do it, but they wont tell me how. I dont want to add all this code just to make a file that saves it & reads from it. I know the streamwriter and streamreader, but its a bit complicated.
How would you add an exe file to the resources of an application. I want to add an exe to the resources so I can run that application on another machine and then be able to take the file from resources and put it on that computer.
View 2 RepliesThis seems almost to easy to ask, but I must be missing something simple.I've added a folder in the project explorer, by right clicking>add>new folderBut when I run under debug, I am unable to save to that folder as it's not in the debug folder, I get:"A Generic error occurred in GDI+"In this code, the first line saves the bitmap fine (in the debug folder), the second line fails with the above alarm..
"vb"
If Not value Is Nothing Then value.Save(Application.StartupPath & "Image.bmp")
If Not value Is Nothing Then value.Save(Application.StartupPath & "ImageImage.bmp")
[code].....
Is there anyway I can get a web browser to open / render the text of a RTB without saving the file? I don't want to save it because it contains sensitive data.
View 2 Replieshow can i save one form to any location But i dont want the whole Projext to be saved just Form 5 not all forms so it will load the input from form 5 only
View 1 RepliesI need my app to determine between Win XP, Vista and Win 7 so It can deside which path to save txt file. I know this can be solved by running program as administrator and be able to save in whatever path you like but it would be good if the user didnt have to. Vista and win 7 suxx in this regard although win7 is great otherwise, use it myself.
Anyways would be nice if it was as simple as:
OS = humhum
and the if else
but probably not TT
I developed a organizer app that will allow me to type in multiple different script ideas I have. I have different text fields for genre, length, characters, etc. Anyway, my problem is how do I go about saving at the information in those text boxes. Is there someway I can save the project as a file, then open it back up to modify it, while still being able to create new ones. Someone suggested using xml data storage, but will that allow me to save multiple different data sets, since I won't just be working with one script all the type.
View 1 RepliesI need program so it saves and saves to a .txt file and so that it can save up to a maximum of 20 times
Public Class Form2
Dim num1 As Integer
Dim num2 As Integer
[Code]....
Imports System
Imports System.IO
Imports System.Drawing
Imports System.Drawing.Imaging
Imports Gif.Components
[Code]...
"pbAnimated" PictureBox contains the .GIF animation. How can I save that animation to file?
Im making a program that can make diffrent profiles. So it have to save: Username, Password, etc. then be able to read it.But I have no clue how to read diffrent lines, and stuff.I was thinking if ex. the pass was like this:<Pass>Pass here</Pass>I can read what was between those things, but I coulnt get it to work ...
View 14 RepliesI'm creating a notepad application with richtextbox as the editor. I have pretty much all of the funtions I want for the application itself, but I want a code that will help me understand whether it has been saved to the computer already.For example, just like in notepad, where you can open a .txt file, and if you don't modify it, it won't prompt you to save on application.exit(), but if you do modify the file in any way, it will ask you if you want to save, and it will automatically save over the opened file without popping up a savefiledialog.
I want my application to do the same thing, and also with any files that I save. For example, when I save a new file, after it prompts me with the savefiledialog, and I save the file to a directory, on my next "save" not "save as" I want it to recognize where it previously saved the file to overwrite it without prompting me with a savefiledialog like "Save As" does.There must be a code to recognize where it was last saved, or opened, but right now my default directory ("Initial directory") for both the open and savefiledialogs are set to the C:/ direcotry.
I have a RichText area, and wanted to create a button, that will take whats in the RichText area, and come up with the prompt for the user to save somewhere on the machine..
View 1 RepliesMy project is using Visual Basic 2010. I have a pure text save file with the following format:
num_TEC|1
num_STR|0
num_PER|0
num_MEC|1
num_KNO|1
num_DEX|1
I'm trying to load the data by using the first column as the object name and the second as the value. I've had some success with the following (skipping some basic IO lines):
prop = FileReader.ReadLine().Split("|")
tempvar = prop(0)
If TypeName(Me.Controls(tempvar)) = "NumericUpDown" Then
Me.Controls(tempvar).Value = prop(1)
I have a problems with this because I have some objects in panels or group boxes and Me doesn't reach into them.
Is there a way to just strictly reference an object with a variable? I'd love to assign the first column into prop(0) and just say
if TypeName(object(prop(0))) = "NumericUpDown" then
object(prop(0)).Value = prop(1)
Is there a really simple way to save the app.config file to a location then load it again? I'm making a multiclient app. I was planning on having each user have a folder, and in that folder would be their personalized app.config file that would load when they log in. I don't really know any XML.
View 13 Replies1. I have a button, and registry entries, each tell me what version and where it is located.
Example : (reg path = HKEY_CURRENT_USERSoftwareTNL)
Path = c:program filesmyprogram
Regan = us
The program its launching is called caw.exe. but it requires diffrent locations in a file named realms.*** file to work properly. Basically if Regan = us, do this, else if regan = eu do that, else if regan = tu do this. I need to basicly erase everything in that file and replace it, the file location is located under :
"PATH"/data/en"Regan"/realmlist.***
The PATH and Regan need to be replaced with correct paths.
2. After it has finished modifying the File it saves it and then Launches
Path/caw.exe