VS 2010 - Remove "stepping Through" Messages?

Jun 14, 2012

I'm using Debug.Print in a loop but all these diagnostis are appearing also:

[code]...

Is there a way to suppress that? I tried:View, Other Windows, Output and then unchecked step filtering messages and that doesn't seem to work.

I also tried:

Tools, Options, Debugging, General and checked enable just my code and that doesn't seem to work.Trival but it clusters my debugging.

View 9 Replies


ADVERTISEMENT

VS 2010 F8 (stepping)executes Only First DIM Stmt And That's It?

Dec 23, 2010

'global declaration
Dim FILE_NAME As String = "EventList.txt"
Dim PATH_FILE As String = Environment.CurrentDirectory() & "" & FILE_NAME
'end of global declaration

[Code]...

Using F8 to step through all of the code, it gets to this sub, highlites Dim fs and then hit F8 again it just pops up the form, no message boxes - nothing. Other notes: EventList does exist in stated directory.

Any ideas why it wouldn't complete the sub? the first debug line after hit the f8 is: A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll but the file is there

View 5 Replies

VS 2010 Stepping Through && Reading Strings?

Apr 29, 2011

what is the easiest way to step through a string in this manner... I want to have my program look for one keyword and then another.. in otherwords it needs to find "hello56" and THEN find the word "bob" there are so many places the word "bob" is but I need to locate the "bob" thats after "hello56" Hope this example is clear.

[Code]...

View 3 Replies

Remove Warning Messages After Converting Vb6 Project?

Apr 16, 2009

I have converted a VB6 project to VB.NET and am left with a large number of inline 'warning messages' such as "UPGRADE_WARNING: Couldn't resolve default property of object varJonSkeet" that I would like to get rid of. Is there a way to do this within Visual Studio 2008? Will it be easier to remove the warning messages with regex? I would prefer to do the removals one file at a time, but it isn't a dealbreaker.

View 4 Replies

Way To Remove Warning Messages After Converting Vb6 Project?

Apr 20, 2012

way to remove warning messages after converting vb6 project to VB.NET

View 2 Replies

VS 2010 Built-in Method For Stepping Back Through Folder Paths?

Jan 27, 2011

Is there a built-in method for stepping back through folder paths? Or a better way then what I'm doing? To go back two folder paths I'm doing it like this...

[Code]...

View 5 Replies

Read WM_COMMAND Messages From A App - Select 'Log Messages' And Find The Windows -Nothing Show's Up?

Dec 10, 2011

I want to use spy++ or Winspector But from what i Read they Dont work on windows 7 64bit Correct ? Im trying to read WM_COMMAND Messages from a App.And whenever i Select 'Log Messages' And find the windows etc.Nothing show's up. Is there a alternative ?

View 3 Replies

Written A Small Class Called 'Messages' That Holds The User Messages?

Sep 24, 2008

here I am again I have written a small class called 'Messages' that holds the user messages.The case is that I am not being able to import it. Here it is:

[Code]...

View 4 Replies

Receive Bluetooth-messages Through Vb 2010?

Sep 22, 2011

How is it possible to receive Bluetooth-messages through vb 2010?

View 1 Replies

VS 2010 Best Way Of Cloning Keyboard And Mouse Messages?

Jun 15, 2011

I'm currently trying to write a program that will clone input from one program and broadcast it to 4 other windows (Mouse and keyboard, with the exception of the enter key). This is for a World of Warcraft and it is legal. I thought that I would use setWindowsHookEx, but I can't figure out how to set it up that it only takes the input from one window and not globally.Can anyone recommend the best way of cloning keyboard and mouse messages ? or give me an example of how to set a windows hook for only one program ?

View 1 Replies

Receive Email Messages In VB 2010 Express Edition?

Jul 5, 2010

I want to receive email messages in VB 2010 Express Edition. I use gmail. It can be pop3 or imap. I would prefer imap but what ever is easier is fine. Then when an email is received i want it to auto reply.

View 2 Replies

VS 2010 - How To Get Users To Receive Messages Without Port Forwarding

Aug 8, 2011

I am testing out packet sending with some friends and I've made a chat program which seems good and all...(not really, its really bad actually), But anyway... The users cant receive incoming messages unless they portforward port 1337 to their computer... How can I get users to receive messages without portforwarding?

View 7 Replies

Each Loop Not Stepping

May 27, 2010

I'm creating a console application that uses System.Management to get WMI information about a selected computer.

The code below executes when the user enters the number 4 to see hardware information about the computer in question. Included is the function called to access the WMI Namespace's object collection[code]...

View 8 Replies

IDE :: IDE Won't Allow Stepping Into A Function?

Feb 13, 2010

have been experimenting with new algorithms for some existing classes, do it by copy and pasting code into newly created classes, adding the references then trying to adapt the unit tests till thy pass.Am stuck in a case where the code in the newly created class makes a call to another class (shared by the newly created class and the existing working class) and the IDE won't allow me to step into the code, showing "external code" on the call stack and mysteriously stopping on a non-breakpointed line in the code it wouldn't step into...a line that immediately precedes an error-generating line which i'm trying to trace and debug. In addition the working existing class makes the same call with no error and the IDE allows normal stepping into it

View 1 Replies

IDE :: Stepping Into A Referenced DLL?

Sep 1, 2011

After reading through several forums, which suggested that I should add a referenced DLL (whose source cod I have) to solution as an added project, I am unable to step through the code of the referenced DLL that generates an error. I also turned off"Enable just my code" from Tools->Options-> Debugging. However, I am still not able to step into the referenced DLL's code I added the pdb file and the referenced dll to the bin/Debug folder of the original code that I am working on

View 4 Replies

Stepping Into COM Callable?

Dec 17, 2009

I have a solution which contains among other things a project which is COM callable.

I would like to put some breakpoints into this and step through it but VS tells me "The breakpoint will not currently be hit".

how I can step into a com callable?

View 1 Replies

Stepping Through A Program?

Nov 27, 2009

Having a bit of a headache with stepping through a program.

I changed the Keyboard to VB6 in Tools > Options with the same result.

He's what happens.

* I put a break point on Line2. The app stops there and so far so good. * I press F8 or F10 or F11 (tried everything) and the app returns an error on line8 instead of stepping to Line3.

The error is obvious, but I want to step through my program 1 at a time.

1: connData.Open()
2: strSQL = "123"
3: strSQL = "123"

[Code]....

View 5 Replies

Stepping Through All IE Entities?

Dec 21, 2011

I am quite new to VB and have a Problem. I need to step through all IE entities and extract the html source of a tab where some conditions are met.

Private Sub TabPage1_Enter(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TabValues.Click, TabPage1.Enter, TabPage2.Enter
Dim err = "", status As String = ""

[code].....

View 1 Replies

Stepping Through DLL Code?

Feb 10, 2009

I have a program, which is a GUI, that calls a DLL. I have both the program and DLL checked out of VSS. When I run the program (in debug mode so that I can step thru the code), it's erroring out in the DLL. How can I step into the DLL code to see where the error is occurring?

View 4 Replies

C# - Stepping Through VB6 COM Object Wrapped By .NET Class?

Jun 16, 2011

I have a VB6 object that is wrapped by a .NET class. As far as I recall it is possible to step through a VB6 object (compiled as a library) by simply running the VB6 library and inserting a breakpoint at the desired location.However this does not appear to be working in my case. I have attempted to recompile the VB6 object and re-reference it in my .NET project but this doesn't appear to have helped. there a way to insert Debugger.Launch() equivalent into a VB6 project?

View 1 Replies

IDE :: Application Run At Full Speed While Stepping With F8

Feb 24, 2012

I am using VS 2010 on Win 7 32 bit.I am debugging a VB application (simple Windows form) by stepping through it with F8; however, for some unknown reason it sporadically runs at full speed after I press the F8 key. This can happen at any given location in code and sometimes not at all.

View 2 Replies

VB Program Works Fine When Stepping Through But Crashes When Ran With The .exe?

Aug 12, 2011

Problem: The excutable of the vb program crashes when trying to run but when I step through the program inside of visual studio it runs successfully.

Details: The program performs a winscp.com transfer from a ftp server and then takes the downloaded file and extracts the data from it before sending it to a webpage. The program also decrypts a des3 encrypted file which holds the login details for the sftp server and the webpage.

My Thoughts: I was thinking this could be something to do with the excutable jumping ahead of the slower transfer and decrypt functions thus causing a "file not found" exception to be produced and the program to exit. Lending to this if I slowly (aka spend 10+ seconds stepping through the code) move through the code it works just fine.

As requested Crash Messages:(I capture everything in exceptions and exit properly so no "crash" is reported but the error I get in my logs is as follows:)

1st run with standard test case:Could not find file 'C:UsersAdministratorDesktop..ILC2INFOENC.txt'

2nd run standard case (the file above was not deleted by my cleanup function either as it could not be found)Could not find file 'C:UsersAdministratorDesktop..ILCNETSL10663.csv'

Background:The first file that is found missing is the encrypted login information file while the second file is the winscp.com downloaded csv file.

View 1 Replies

VS 2005 : Debugger Stepping To Non-executed Statement?

Nov 9, 2009

I've seen this in two different places & can't quite figure it out. I can think of at least two possibilities but don't have a lot of confidence in either.When stepping thru code I encounter the following:

If x = True Then
y = New ContextMenu
Me.ContextMenu = y

[code]....

x is False. The debugger stops on the If & I press F11 to evaluate it. The Debugger then advances to Me.y.MenuItems.Add(z), which is *not* the next statement that should execute. Nor does it appear as if it does execute as, when I press F11 again, the Debugger exits the Sub, as it should. But why highlight it as if it will execute?This is even more confusing in the next example:

If Not Me.FindForm Is Nothing Then
If Not TypeOf Me Is A AndAlso Not TypeOf Me Is B Then
Me.x = "OFF"
End If

[code]....

Me.FindForm is a Form, so it's not Nothing. Me is type A so the 2nd If is False. The Debugger stops on the 1st If, I press F11 & it advances to the 2nd If, as it should. Then I press F11 again & it advances to FatalException in the Catch block. What? Did the attempt to evaluate the TypeOf Me cause an error? It shouldn't, and it doesn't seem as if it did as F11 again exits the Sub rather than stepping into FatalException. So why did it stop there?

My first thought was that the intermediate code got out of step with the displayed source code. I've seen that in other IDE's with interactive debuggers, but usually because those allow you to run the Debugger without re-compiling the code. Not so with VS-so that seems unlikely.My second thought is that it's stopping there because those are the last 'executable' statements in the Sub. But that doesn't really make sense as, in other Subs, it will stop on the End Sub.

View 3 Replies

Force MS Chart Control To Not Use Decimals When Stepping Axis?

May 9, 2012

I have a data point with a y-value of 1 being plotted, the MS Chart control will use increments of 0.2 on the y-axis. How can I force it to not use a decimal, keeping in mind I will have values of >100 so I can't just force an increment of 1 on the y-axis?

View 1 Replies

IDE :: How To Disable Debugger Stepping Into DLL Control Source Code

Apr 6, 2011

I have created a DLL that contains basic functions used in my projects. With the DLL I:Compiled it as a Release Moved the .dll file to another folder Deleted the .pdb files in the binRelease folder When I add the reference of this DLL to my projects and I debug my code, I step through line-by-line and when it comes to a function from my DLL, it actually opens up the source files of my DLL and debugs line-by-line in the DLL source code.

This is REALLY annoying for my purposes and I have tried many things now to disable the debugger stepping into my DLL code. I did a text search in the DLL file and found it stores the path of the project folder.

So far the only thing that's worked is moving/renaming the folder where the DLL project source files are. But everytime I re-build the DLL, once again I would have to move/rename the folder again as it's updated the location of the source.

View 2 Replies

Stepping Through A Directory With Dir.getfiles(path,searchoption.alldirectories)?

Jan 2, 2012

When I have a directory setup with a subdirectory and both the top directory and sub directory have files in them I get a list of all the files with no directory info. That's OK, but I need to restore them to another location with the same directory structure in place. I'm essentially copying all files in a directory and it's subs to another location. The problem is the sub directory info is not in the files list so everything goes into the main directory. How do I get around this or can I? Here is what I'm using now.

I have a directory, NewProg in Program Files and a sub directory under it called Sub.

files=dir.getfiles("C:Program FilesNewProg",searchoption.alldirectories)

My.Computer.FileSystem.CopyFile("C:Program FilesNewProg" & File.Name, "C:NewProg" & File.Name,True)The Sub directory is not created and even when it is there, it always comes up empty with all it's files copied into the main NewProg.

View 1 Replies

IDE :: Very Slow Debug Stepping With Vista 64 Running Vb 10 Express On Hp Pavillion Notebook

Mar 31, 2011

My HP dv6 - 1030US notebook has 4 gb of ram, and a Fujitsu MHZ2320BH G2 hard rive with 166 GB. free. running vista 64 SP2 and all current kb's installed. My problem is trying to test Vb 10 express with this unit. I am an ex vb 6.0 guy(beginner level) and still put small # of apps together for my remodeling company.

[Code]...

View 8 Replies

VS 2010 - How To Remove Duplicates

Sep 3, 2010

just to finalise this, how can i remove duplicates? i have tried this:

[Code]....

View 1 Replies

VS 2010 Remove All Duplicates?

Apr 6, 2012

I have the following coding in place which basically edits my text file, however with the information that is shown in the text file I want to remove all duplicates, is this possible?

Dim path As String = "c: est1.txt"
Dim sb As New StringBuilder
Dim sr As New StreamReader(path)

[Code]....

View 3 Replies

VB 2010 Express - Remove Or Add Several References

Jan 21, 2011

I have taken my project that seemed to have several bugs in VB2008 Express and upgraded to 2010. I had to remove or add several references again. I don't have any more errors but I have the following 5 warnings that keep me from compiling the build. I was wondering if anyone could give me some suggestions on what these mean or how to take care of the problem. I will list the warnings below. I'm on a Win XP machine with Office 2010 (if that might affect things).

Warning1A reference was created to embedded interop assembly 'ADODB' because of an indirect reference to that assembly from assembly 'AxInterop.OWC11'. Consider changing the 'Embed Interop Types' property on either assembly.PE Files

[CODE]...

This last one I have gotten before but when I tried to update the components it only caused my program to become corrupt and tons of errors. I'm not sure if I did something wrong previously or if this might have been a random occurrence.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved