Add A Separator In The Form?
Nov 15, 2011I want to now how to place a separator in the form. The one which is available in Menus
Example:
Label1
Label2
Label3[code]....
I want to now how to place a separator in the form. The one which is available in Menus
Example:
Label1
Label2
Label3[code]....
I'm trying to filter the results of a xml file. One of the fields I've been requested to filter is the attribute price of each node. The problem is the xml is from a spanish source and the prices are with decimal separator being , instead of . and thousands separator is , instead of .I'm trying to get an xml file filtered where only nodes withprices lower than one supplied appear.
The xml structure is:
<RoomStays>
<RoomStay InfoSource="" Price="201,60" Discount="0" MealPlan="Sólo alojamiento" MealPlanId="1" Provider="Marsol" ProviderId="3" HotelName="HOTEL LA ESTACION" Rating="" Latitud="" Longitud="">
[code]....
I've tried to filter using XPath and Linq2Xml. I've come to the conclussion I have to replace , with . and . with , but I get 0 results.With values below 1000 where there is only , I've got it using:
doc.XPathSelectElements(./RoomStays/RoomStay[translate(@Price,',','.')<=256.78])
But when there are prices above 1000 with thousands separator . it doesn't work, so I tried:
doc.XPathSelectElements(./RoomStays/RoomStay[translate(translate(@Price,'.',''),',','.')<=256.78])
But it returns 0 results (I tried to use replace function instead of translate to remove the . characters but I get an exception).
Using VB.NET - I have a string:
"##RES00012##Some value ##RES00034##Another value"
That I want to split using the "##RES" as a seperator to:
"##RES00012## Some value " and "##RES00034## Another value"
The string.split function doesn't seem to offer an overload to split on multiple characters or array of characters and maintain the seperator, which is required for functional purposes.
I'm looking at simply searching for indexOf("##res") and using string manipulation to do this unless I'm missing something obvious? I've searched SO for a solution but unable to find anything that actually does what I'm after.
The following is the closest i've found: how-do-i-split-a-string-by-a-multi-character-delimiter-in-c
I know how to add menu separator in under UI, but how can i add it programmatically.
View 3 RepliesI am developing a window based application. I want to show my menu to be separated by a vertical separator. Just like this:
View 6 RepliesI have a string variable with value "abcdefghijklmnop".now I want to split the string into string array with say 3 characters(last array element may contain less) in each array element from the right end.
[Code]...
Suppose I have a number[code]...
View 4 Repliesi need to comfine 3 string after i need to split it my problem is the 3rd string inside contains ,(Comma) so how to seperate by comma
View 16 Repliesi have a main menu and when the program and launched the contents are cleared then a few items are added before loading in all the favorite websites and such. I'm trying to find the code to inset a separator after the items i have defined are inserted.[code]
View 4 RepliesWhere in VS2010 can I find a horizontal separator control, as can be found in Outlook settings (screenshots below)?[URL]..
View 3 RepliesI have a app that updates an Access Database via a datagrid view. I'm updating two column of type Single. The code works perfectely when the regional settings are default US-EN.For computers running in germany an update to the backend database throw a datatype mismatch error. I change the decimal separator on the computer with 'German' for region settings from Comma (,) to (.) period and everything works fine.I add thread culture to US-ENG at the startup of the application. Now the error disappears but then 2.5 is now stored as 25 in the access database.
I add these lines at the beginning of the application soon after the designer code
System.Threading.Thread.CurrentThread.CurrentCulture = New System.Globalization.CultureInfo("en-US") System.Threading.Thread.CurrentThread.CurrentUICulture = New System.Globalization.CultureInfo("en-US")
This is a MDI app and this code is in the container window...
Feel pretty stupid for asking this but I'm looki to add a very simple horizontal line/bar/separator to my GUI for a small project.I'm using Visual Basic 2010 Express. Last time I did any programming was with VB6 and I'm sure you could do this easily with that version but 11 years is a long time.
View 4 Repliesfacing some problems to achieve what I want. I have this piece of code which is working fine. My problem is that I want to display the results of the Text Boxes 2, 5 and 8 with thousands separated by commas and only with two decimals separated by dot , e.g. 1,234,567.89. I tried using Format and other options but I was unable to get the correct result.
Public Class Form1
Private Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
If Not IsNumeric(TextBox1.Text) Or (ComboBox1.Text = "" And ComboBox2.Text = "") Then
MsgBox("Valores inv�lidos ou defini��es incompletas", MsgBoxStyle.Information)
TextBox1.Text = ""
[Code]...
say if I have a string 010451-09F2
How to I get left of - from the above string in vb.net
I want 010451
The left function doesn't allow me to specify separator character.
I am working on a site where I use the Split function on a string. To make sure I used a separator character that I do not use anywhere in the data I selected the character'£'. This worked fine in Firefox and Safari, but in IE8 I get an 'Index out of range' error, so apparently the '£' character is not handled correctly.
View 5 RepliesHow to switch off the annoying (to me anyway) horizontal line that seperates procedures in Vb?
I've setup a new Dev machine for myself and for the life of me I can't figure out how to switch it off in VS2008.My mind is obviously failing with age, I know I did it on the old machine!
I want to achieve the same thing as highlighted in attached file, so called seperator or page break, but i'm unable to find this control in VS 2005, how to get this control?
View 3 RepliesIn Window form. I want to add informative text to the Menu separator. Can anyone suggest how to do that?
for example separator should appear like below
Menu Item1
Menu Item2
----- Separator title -----
Menu Item3
Menu Item4
After Lots of attempts I am only able to add simple separator.
Is there a format string to format a decimal to 000000000,00. So first 9 digits, right padded with zeros if needed; a comma as fraction separator and two fraction digits.
0 => 00000000,00
12 => 00000012,00
987456,456 => 000987456,46
So something like myDecimal.ToString("D9") together with .ToString("F2").
Since I am making a program with quite a few users with different access levels, I usually turn all the toolstripmenuitems to visible false first, before turning some of them to visible true again as specific to the users.[code]...
View 3 RepliesIn VB.Net, is there a way of auto-detecting the culture of a string representation of a number? I'll explain the situation:Our asp.net web site receives xml data feeds for boat data. Most of the time, the number format for the prices use either a simple non-formatted integer e.g. "999000". That's easy for us to process.Occaisionally, there are commas for thousands separators and periods for the decimal point. Also, that's fine as our data import understands this. Example "999,000.00".We're starting to get some data from France where some of the prices have been entered with the periods and thousands separators the other way around as that's the way it's done in many European countries. E.g. "999.000,00". This is where our system would interpret that as nine hundred and ninety nine pounds instead of the nine hundred and ninety nine thousand pounds that was intended.
View 2 RepliesArgument matching parameter 'separator' narrows from 'String' to Ƈ-dimensional array of Char'. ERROR
View 7 RepliesI have an excel file i want to copy all the row of that excel file into a .txt file.In the txt file the separator is comma.
View 8 RepliesOdbcDataReader in showing decimal fields Decimal separator disappear with DB2 dsn
View 3 RepliesWhat is the cleanest, most readable way to String.Format a decimal with the following criteria
start with a sign symbol (+ or -)
a fixed number of fraction digits
no decimal separator
right aligned
pre-padded with "0"'s
What my program does is load a file (password list), then progressively reads each line of text in the file whilst writing each line to a new file. After X amount of lines have been written, it should start writing the lines of text to a new document until the initial password list has been split into X amount of password lists. The problem I have is that after hours of tweaking, all I can get it to do is write either blank ocuments, or write all of the lines to only one file. I really need it to be able to split into multiple files, preferably at runtime rather than loading a whole text document into the program in a textbox or array then writing it to new files.Below is the source:
Imports System
Imports System.Windows.Forms
Imports System.IO
[code].....
Im Using VB 2008. I have MsgBox() statements in all Mouse & Form Click events to TEST & NOTHING FIRES during Form Load when I click on Form or Button Controls !!! The Form Load event contains code for Displaying the Label.Text control many times with changes in the Text to simmulate annimation.
[Code]...
The following code does create a form within a form and does place NotePad inside the child form. You have to manually start NotePad prior to execution (I work on that later) but the code does work¦ My problem is now I want to manipulate the properties of notepad i.e. focus, size, location, etc. but I cannot figure out how to reference notepad and its properties.
[Code]...
get a button on form A to open form B and then close (not hide) form A when clicked?Background: I am coding a VSTO application for Excel in VB2008.
Private Sub FormAButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles FormAButton.Click
Dim FormB As New FormB
[code]....
I have a form being called form several forms using ShowDialog().
1. Is there a way for called form to know which form called it by receiving a code or key from the calling form?
2. The calling form has a gridview. How can the called form pick up a column's value from the currently highlighted row in gridview in the calling form?