Allow The User To Add Locations For Direct3D Icons?

Jan 23, 2010

I'm making a scripter to allow the user to add locations for Direct3D Icons, but I'm trying to make a sub for it...

Public Sub icoadd(ByVal mod1 As String, ByVal mod2 As String)
loc.X = defined.Location.X
loc.Y = defined.Location.Y

[Code].....

View 4 Replies


ADVERTISEMENT

User Interface For Various File Locations

Sep 11, 2009

I have a generic question regarding file paths and user interfaces. I am trying to build a user-interface to accommodate various file locations. I typically build interfaces which deal with files on drives. As such, I use a directory tree for this. I usually work with files on local drives. However if I wanted to ensure that all file locations were dealt with I would want to ensure that I was accommodating files in all drives (local, network, mappped etc.). I am assuming that the treeview would support all of these drive option.

However if the files are on a sharepoint site or in some other type of enterprise content system, then am I correct to assume that these file paths will be URLs? If so, then am I correct to assume that a directory tree is not the correct control to use for these locations? Should I be providing a textbox to the user and prompting them to enter this URL? Or is it better to have the URL loaded into a ListView or ListBox (i.e. "My Connections") and then provide these as options via a dropdown box. I am trying to picture a typical user interface. Is it a directory tree AND a text box/dropdown box.

View 1 Replies

Populate Same Data Captured Via User Form On Multiple Locations Of A Document?

Feb 28, 2009

On a word document I would like to populate same data captured via User Form on multiple locations of a document... i.e. LastName I would like to appear on salutation paragraph and also in the body of the letter... I used REF LastName on the document when using VBA but it seems the same document when it is being populated via a VB application this skim does not work and instead "Error! Reference source not found." appears where ever the REF LastName has been used..

View 3 Replies

Add Icons To A Listview That Would Contain A List Of Programs Added By The User?

Apr 16, 2011

I am trying to add icons to a listview that would contain a list of programs added by the user. I am pulling my hair out over this. I had the solution a few days ago and then I decided to go in another direction and then cleared my browser history. I have searched for that code for awhile now to no avail. First person gets a cookie.

Warning: cookies may contain nuclear waste.

View 14 Replies

.net - Windows Shell API For Status Icons Beside File Icons

Feb 13, 2011

TortoiseSVN and Dropbox both have Windows shell extensions that make file icons within Windows Explorer show a small icon beside the main one, showing the file's status - has it been synced, etc How can I make my application show icons beside files like that using the Windows API? Or is there some file attribute to do that?

View 1 Replies

Avoid The Direct3D Loaderlock Expectation?

Jul 13, 2009

OK, I've read everything I could find about this loader lock exception: DLL <name>.dll' is attempting managed execution inside OS Loader lock. Do not attempt to run managed code inside a DllMain or image initialization function since doing so can cause the application to hang.

Just turning off the loader lock exception in the managaged debugging assistants doesn't work (my real application then hangs), and all the work-arounds are for doing things in C++ that I can't do in VB (like setting linker options). So, can anyone tell me how to make this simple blank form (with two additional lines of code in the constructor) avoid a loaderlock execption under VS2008? (If I know what to do to fix this toy example, I can probably fix my real app.)

[Code]...

View 10 Replies

Boolean Subtraction Of Two Meshes With Direct3D

Jun 20, 2009

i'm working on a simple 3D CAD to create complex 3D objects. This application uses:

1. Direct3D to render the objects
2.The methods contained in the Mesh class (such as Mesh.Box(...)) to create them
3.The Matrix class to apply some basic transformations (such as Translation or Rotation)

My issue is to do a boolean subtraction of a Mesh to another one to create a more complex Mesh, for example a Mesh with holes.

View 3 Replies

DirectX.Direct3D Rotation And Textures?

Mar 12, 2011

SI like doing random things like 3D objects inside a windows form. With that said, I'm creating an application that will, eventually, write the code for me, after I do it myself visually.If you run the app it will make some more sense I guess.Now, to rotate the cubes, I'm using

.Transform.World = Matrix.RotationYawPitchRoll(CSng(CubeRx(1) / 10), CSng(-CubeRy(1) / 10), CSng(CubeRz(1) / 10))

now I do not want the world to rotate, just my individual cubes.Here's an example of me referring to my cube in action

If howmanycubes >= 1 Then
' vb2 = New VertexBuffer(GetType(CustomVertex.PositionNormalColored), 36, d, Usage.Dynamic And Usage.WriteOnly, CustomVertex.PositionColored.Format, Pool.Default)

[code]....

how to apply textures to the cube.instructions:When running the program, type in values on right side and click create cube.before you click create cube again, those same text boxes will adjust your current cube.Then when you click create new, it places another cube ontop of your current cube, so you'll need to give it new values.Not much validation is going on so some bad values will cause crashes.

View 1 Replies

.net - Casting From Int32 To 'Microsoft.DirectX.Direct3D.VertexShader'?

Mar 4, 2010

How to solved error Unable to cast object of type 'System.Int32' to type 'Microsoft.DirectX.Direct3D.VertexShader'

We want to case ''System.Int32' value into 'Microsoft.DirectX.Direct3D.VertexShader'
I tried with CType but not working.Also tried mD3DDevice.VertexShader = CObj(D3DFVF_CUSTOMVERTEX_BOX)

View 1 Replies

Windows 7 Can't Find DirectX9 Microsoft.DirectX.Direct3D.dll?

Apr 9, 2009

this error seems to be an error on Microsoft's part with Windows 7 and DirectX9. DirectX11 on Windows 7 should be able to run DirectX9, but it says it can't find the assembly called "Microsoft.DirectX.Direct3D.dll". I know for a fact that he can play Assasins Creed on Windows 7 which uses DirectX9.. Why does that game work but not my application? I'm using VB.NET btw.

[Code].....

View 6 Replies

Direct3D / Windows Mobile - Lighting / Shading - Mesh Appears Flat?

Mar 20, 2010

Im currently working my way through understanding direct3D with visual basic for windows mobile. So far I have managed to write a fairly decent engine that allows me to create and transform any number of 3D primitives and 2D sprites. However I cant seem to figure out how to get Direct3D to apply any sort of shading to my meshes. Regardless of what angle they are to the camera, or their position in 3D space, they remain a solid flat color on every single polygon of the mesh.

[Code]...

View 3 Replies

Make A Form With Icons That Have Labels Are Like Desktop Icons On Your Desktop?

Mar 20, 2010

I would like to make a image in the form representing the icon and a label below it to represent name but is there a easy way to do this.

View 2 Replies

Get All Picture Box Locations?

May 12, 2012

I want to get all picture box locations. I am remotly creating them so i couldent just get each one individualy.

View 2 Replies

.net - Compiled Class In Two Locations

Aug 22, 2011

I'm a tad stuck trying to get a List to load from the ViewState using ASP.NET 4 and VB.NET. When I try to retrieve a collection using:

[Code]...

View 1 Replies

Drawing A GDI+ Path In Several Locations?

May 4, 2011

After a path is defined with all its components, is there a version of the DrawPath that allows the composite object to be drawn in locations other than the initial locationsFor example, the code shown below displays an ellipse and two rectangles in a specificocation. To also display the same objects in one or more other location,s, is it possible to disply the defined path at other locations or is it necessary

View 2 Replies

Picturebox Clicking Certain Locations?

Jan 13, 2011

I am working on making a picturebox that when clicked in a general location it will do something. Is there a way to make a grid out of a picture so when a certain slot on that grid is clicked an event will happen? It cant be an exact location, because that will be too hard to click. but a relative location would be perfect.

View 3 Replies

VS 2008 - Deployment Locations ?

Feb 14, 2010

The file locations for a setup package using Standard Edition? I have added an .xls file to my project, marked it as Content and as Copy Always in the properties for that file. The XLS file I added to the project is from my user Apps folder in the Roaming sub folder. Other simple .TXT files are in my UserMy DocumentsData folder and each file is also maked as Content and Copy Always. When I create the setup package all goes well. I have a setup.exe and an .msi file. When I test it by installing it on my PC of course the program knows where the files are because it's my PC. In the program folder created as C:Program FilesMyProgram I find the .exe plus the XLS and TXT files, but these XLS and TXT files are not used from the program folder. How might I know if an installation made by another user on another PC elsewhere is going to load files in their user apps or user documents? I need to be sure that the additional data files deploy to the correct location (whatever I want that to be) on a remote PC.

View 3 Replies

VS 2008 Object Locations?

Apr 23, 2012

I would like to make a simple functions for my program but I can't figure out what to do. I want the picturebox PBplayerbullet to be moved in the midle top of the picture box PBplayerim I know that if I use PBplayerbullet.location = PBplayerim.location will it to the top left part of the picture, but how it can be moved to the midle ?

View 5 Replies

Acceptable Application Folder Locations?

Jan 29, 2009

My application may be run by a number of different users and needs to be able to read and write to the same filles irrespective of what user is logged on to the PC.What is an acceptable location to store these files?i.e. a folder that has read/write permissions set as default.

View 2 Replies

Application Settings File Locations

Dec 16, 2009

I want define where my application and user settings files will be located.I would also like to rename them.For example my project will have a number of folders located inside the application folder when deployed.One of those folders is labelled "Cfg" and i want my application settings files to be saved in there.This is including the user settings, i dont want to localize the user settings file as is done automatically (at least not at this stage).

View 3 Replies

Collection Of Locations - How To Skip First Record

Apr 7, 2009

I have a collection of locations for a sales person, allowing them to send an item to multiple locations. I want to start reading at index 1 since I am using a collection. I saw an example where you can say something like "+ 1" (e.g. myitem.SelectedIndex + 1) to skip the first record. How can I skip the first record for the following:

Public ReadOnly Property Customer() As ICustomer
Get
Return CType(Me.CustomerList.Item(Me.CustomerNumSelected), ICustomer)
End Get
End Property

I tried to say Return CType(Me.CustomerList.Item(Me.CustomerNumSelected + 1), ICustomer) but it returns an error saying "string cannot be converted to a double". without the + 1 in there, I get an error that says "collection index must be in range 1 to size of collection".

View 5 Replies

Comparing Characters At Different Locations In A File?

May 2, 2009

My card program generates a text file AllCards.txt - I want to know when the first character in this file is identical to the 3rd, 5th, 7th, or 9th. In this case I would need A (1st char) checked against the 5 (3rd char), 5 (5th char), 7 (7th char) and 8 (9th char).

[Code]......

View 12 Replies

Get X And Y Locations Of A Moving Butto In Vb 2005?

Mar 15, 2009

I used the code below to make the button move but now i need to get the current location of the X and Y and show it in a label on the form..ex

[Code]...

View 2 Replies

Move The Mouse To Different Locations In Another Application?

Feb 11, 2012

How can I move the mouse to different locations in another application. Currently, I used HDC and HWND to get my window's handle. (Also FindWindow). So, is it possible to like MouseMove(HDC, 5,5)?

View 4 Replies

Moving A PictureBox To Predefined Locations?

Jan 22, 2011

I'm working on a little board game we play here in Jamaica just to see how it would look and as a sort of challenge for myself while on vacation. I'm however stuck on how to make my markers (PictureBoxes - two per player) move along the board.So heres my problem; I have 40 slots where the picturebox can be moved to (eg picturebox1.Top = 324, picturebox1.left=243). Now moving to these slots are determined by the roll of a pair of dice. How can I assign a variable preferably an integer for each slot so when the dice is rolled I can just do a little addition as to where the markers can be moved?

View 7 Replies

Put Files In Certain Locations And Create Own Installer

Feb 11, 2009

I am trying to create an install for my application that I have just created using visual basic express. I want to be able to tell it to put files in certain locations and create my own installer. For example I want to make a license page with a read me on the installer. From what I understand the clickonce technology is what comes with express editions and you cannot do it with them. Is there an alternative to being able to accomplish what I want to do without having to purchase the full version of visual studio?

View 7 Replies

Saving Streamwriter In Two Seperate Locations

Jun 11, 2011

Greetings,

My app saves a bunch of stuff to an XML file. This is my line of code-
Using writer As XmlWriter = XmlWriter.Create("C:vdx2kMWSREEXTReportsInboxTK" & frmCitation.txtCiteNumber.Text & "Traff.xml", settings)

So that saves it at that specific location.

I need to duplicate the XML and have it also save in another location. I've been at this for days, Googling, searching, trying different things and now I need to turn here for help.

Any ideas?

View 2 Replies

Show Some Forms But Want Them To Appear On Specific Locations?

Sep 27, 2010

I want to show some forms but I want them to appear on specific locations . The problem is I don't know how to specify the coordinates . Using :

frm.Location = "0,0"
or
frm.Location = (0,0)

tell what is the correct syntax ?

And more thing : when a form is maximized or minimized , it looks like "flying" upwards or downwards . Is it possible to stop that visual efect ?

View 4 Replies

Forms :: Display All The Toilet Locations Via PictureBoxes?

Sep 2, 2011

I am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets. It will display all the toilet locations via PictureBoxes. I want to do this without having to write all this code?

Private Sub chkCash_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chkCash.CheckedChanged

[Code]...

View 9 Replies

Keeping Control Locations Relative On Maximize?

May 22, 2011

I'm trying to figure out how to keep control locations relative on maximize. For example, if i have a button on the very right hand of my window, when i maximize it, i want the button to remain on the very right hand. Or when i grow my window, i want my controls to change location so its always relative to the size of the window. how can i achieve this?

EDIT: To provide a better example, if i have a window with a button in the center, when i maximize that window the button should remain in the center rather than in the same location as before and therefore being out of place.

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved