Get All Picture Box Locations?
May 12, 2012I want to get all picture box locations. I am remotly creating them so i couldent just get each one individualy.
View 2 Replies
ADVERTISEMENT
Make An Array In A Loop Change Picture Box Locations?
May 24, 2011I have made a For next loop with an array. I want all my picture boxes to follow each other within the loop. I have currently been using old code, but not in a loop or array format. The old code works. The array code only makes the 2nd picture box follow the FIRST one. It doesn't loop the rest. I have checked the code and cannot determine any mistakes, else I'm missing out on something I haven't been taught.[code]...
View 17 RepliesGame Programming :: Resetting The Locations Of An Array Of Picture Boxes?
May 26, 2011I have created this code to reset my picture boxes to default locations upon form load.
my sub:
Code:
Sub reset_Alien_locations()
Dim Xlocation As Integer = 26
For segmentIndex As Integer = 0 To AlienArray.Length - 114
[Code]...
I have this sub load up upon form_load event. Yet it doesn't do a thing! I want each picture box to appear on the same row, hence the y axis is set to 49. but I want my X-axis to be added by 30, so that there is a gap of 30 pixels between each picture box, hence the x point is: Xlocation = Xlocation + 30
.net - Compiled Class In Two Locations
Aug 22, 2011I'm a tad stuck trying to get a List to load from the ViewState using ASP.NET 4 and VB.NET. When I try to retrieve a collection using:
[Code]...
Drawing A GDI+ Path In Several Locations?
May 4, 2011After a path is defined with all its components, is there a version of the DrawPath that allows the composite object to be drawn in locations other than the initial locationsFor example, the code shown below displays an ellipse and two rectangles in a specificocation. To also display the same objects in one or more other location,s, is it possible to disply the defined path at other locations or is it necessary
View 2 RepliesPicturebox Clicking Certain Locations?
Jan 13, 2011I am working on making a picturebox that when clicked in a general location it will do something. Is there a way to make a grid out of a picture so when a certain slot on that grid is clicked an event will happen? It cant be an exact location, because that will be too hard to click. but a relative location would be perfect.
View 3 RepliesVS 2008 - Deployment Locations ?
Feb 14, 2010The file locations for a setup package using Standard Edition? I have added an .xls file to my project, marked it as Content and as Copy Always in the properties for that file. The XLS file I added to the project is from my user Apps folder in the Roaming sub folder. Other simple .TXT files are in my UserMy DocumentsData folder and each file is also maked as Content and Copy Always. When I create the setup package all goes well. I have a setup.exe and an .msi file. When I test it by installing it on my PC of course the program knows where the files are because it's my PC. In the program folder created as C:Program FilesMyProgram I find the .exe plus the XLS and TXT files, but these XLS and TXT files are not used from the program folder. How might I know if an installation made by another user on another PC elsewhere is going to load files in their user apps or user documents? I need to be sure that the additional data files deploy to the correct location (whatever I want that to be) on a remote PC.
View 3 RepliesVS 2008 Object Locations?
Apr 23, 2012I would like to make a simple functions for my program but I can't figure out what to do. I want the picturebox PBplayerbullet to be moved in the midle top of the picture box PBplayerim I know that if I use PBplayerbullet.location = PBplayerim.location will it to the top left part of the picture, but how it can be moved to the midle ?
View 5 RepliesAcceptable Application Folder Locations?
Jan 29, 2009My application may be run by a number of different users and needs to be able to read and write to the same filles irrespective of what user is logged on to the PC.What is an acceptable location to store these files?i.e. a folder that has read/write permissions set as default.
View 2 RepliesAllow The User To Add Locations For Direct3D Icons?
Jan 23, 2010I'm making a scripter to allow the user to add locations for Direct3D Icons, but I'm trying to make a sub for it...
Public Sub icoadd(ByVal mod1 As String, ByVal mod2 As String)
loc.X = defined.Location.X
loc.Y = defined.Location.Y
[Code].....
Application Settings File Locations
Dec 16, 2009I want define where my application and user settings files will be located.I would also like to rename them.For example my project will have a number of folders located inside the application folder when deployed.One of those folders is labelled "Cfg" and i want my application settings files to be saved in there.This is including the user settings, i dont want to localize the user settings file as is done automatically (at least not at this stage).
View 3 RepliesCollection Of Locations - How To Skip First Record
Apr 7, 2009I have a collection of locations for a sales person, allowing them to send an item to multiple locations. I want to start reading at index 1 since I am using a collection. I saw an example where you can say something like "+ 1" (e.g. myitem.SelectedIndex + 1) to skip the first record. How can I skip the first record for the following:
Public ReadOnly Property Customer() As ICustomer
Get
Return CType(Me.CustomerList.Item(Me.CustomerNumSelected), ICustomer)
End Get
End Property
I tried to say Return CType(Me.CustomerList.Item(Me.CustomerNumSelected + 1), ICustomer) but it returns an error saying "string cannot be converted to a double". without the + 1 in there, I get an error that says "collection index must be in range 1 to size of collection".
Comparing Characters At Different Locations In A File?
May 2, 2009My card program generates a text file AllCards.txt - I want to know when the first character in this file is identical to the 3rd, 5th, 7th, or 9th. In this case I would need A (1st char) checked against the 5 (3rd char), 5 (5th char), 7 (7th char) and 8 (9th char).
[Code]......
Get X And Y Locations Of A Moving Butto In Vb 2005?
Mar 15, 2009I used the code below to make the button move but now i need to get the current location of the X and Y and show it in a label on the form..ex
[Code]...
Move The Mouse To Different Locations In Another Application?
Feb 11, 2012How can I move the mouse to different locations in another application. Currently, I used HDC and HWND to get my window's handle. (Also FindWindow). So, is it possible to like MouseMove(HDC, 5,5)?
View 4 RepliesMoving A PictureBox To Predefined Locations?
Jan 22, 2011I'm working on a little board game we play here in Jamaica just to see how it would look and as a sort of challenge for myself while on vacation. I'm however stuck on how to make my markers (PictureBoxes - two per player) move along the board.So heres my problem; I have 40 slots where the picturebox can be moved to (eg picturebox1.Top = 324, picturebox1.left=243). Now moving to these slots are determined by the roll of a pair of dice. How can I assign a variable preferably an integer for each slot so when the dice is rolled I can just do a little addition as to where the markers can be moved?
View 7 RepliesPut Files In Certain Locations And Create Own Installer
Feb 11, 2009I am trying to create an install for my application that I have just created using visual basic express. I want to be able to tell it to put files in certain locations and create my own installer. For example I want to make a license page with a read me on the installer. From what I understand the clickonce technology is what comes with express editions and you cannot do it with them. Is there an alternative to being able to accomplish what I want to do without having to purchase the full version of visual studio?
View 7 RepliesSaving Streamwriter In Two Seperate Locations
Jun 11, 2011Greetings,
My app saves a bunch of stuff to an XML file. This is my line of code-
Using writer As XmlWriter = XmlWriter.Create("C:vdx2kMWSREEXTReportsInboxTK" & frmCitation.txtCiteNumber.Text & "Traff.xml", settings)
So that saves it at that specific location.
I need to duplicate the XML and have it also save in another location. I've been at this for days, Googling, searching, trying different things and now I need to turn here for help.
Any ideas?
Show Some Forms But Want Them To Appear On Specific Locations?
Sep 27, 2010I want to show some forms but I want them to appear on specific locations . The problem is I don't know how to specify the coordinates . Using :
frm.Location = "0,0"
or
frm.Location = (0,0)
tell what is the correct syntax ?
And more thing : when a form is maximized or minimized , it looks like "flying" upwards or downwards . Is it possible to stop that visual efect ?
User Interface For Various File Locations
Sep 11, 2009I have a generic question regarding file paths and user interfaces. I am trying to build a user-interface to accommodate various file locations. I typically build interfaces which deal with files on drives. As such, I use a directory tree for this. I usually work with files on local drives. However if I wanted to ensure that all file locations were dealt with I would want to ensure that I was accommodating files in all drives (local, network, mappped etc.). I am assuming that the treeview would support all of these drive option.
However if the files are on a sharepoint site or in some other type of enterprise content system, then am I correct to assume that these file paths will be URLs? If so, then am I correct to assume that a directory tree is not the correct control to use for these locations? Should I be providing a textbox to the user and prompting them to enter this URL? Or is it better to have the URL loaded into a ListView or ListBox (i.e. "My Connections") and then provide these as options via a dropdown box. I am trying to picture a typical user interface. Is it a directory tree AND a text box/dropdown box.
Forms :: Display All The Toilet Locations Via PictureBoxes?
Sep 2, 2011I am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets. It will display all the toilet locations via PictureBoxes. I want to do this without having to write all this code?
Private Sub chkCash_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chkCash.CheckedChanged
[Code]...
Keeping Control Locations Relative On Maximize?
May 22, 2011I'm trying to figure out how to keep control locations relative on maximize. For example, if i have a button on the very right hand of my window, when i maximize it, i want the button to remain on the very right hand. Or when i grow my window, i want my controls to change location so its always relative to the size of the window. how can i achieve this?
EDIT: To provide a better example, if i have a window with a button in the center, when i maximize that window the button should remain in the center rather than in the same location as before and therefore being out of place.
Logic - Whenever Object Move To Locations, It Will Turn One By One ?
Oct 11, 2011I have a variable called Map(19,19) is List Of Point and a Object(x,y).i want whenever my Object move to locations like Map(0,Y) or Map(19,Y) or (Map(X,0) or Map(X,19) it will turn one by one part of my Object to the other side for example when my object at location Map(0,Y) firstly, Object'head immediatetly appear at Map(19,Y) and then one by one part of it moves like that.Here my code: you can start watch from rbGeneral.checked, i already get a current position of my snake by declare 2 variables X and Y, but at If Clause i dont know put anything there to solve my trouble.
Private Sub tmr_tick(ByVal sender As Object, ByVal e As System.EventArgs) Handles tmr.Tick
'Move Snake
Select Case currentDirection[code].......
Loop/design - Looping Through A Database With Pdf Locations
Sep 14, 2011I am looping through a database with pdf locations. The application is button click event driven. The problem I am having is that I display a pdf. If the user clicks on the button then the pdf information is inserted into a database and the loop should be taking me to the next pdf. However, this loop does not seem to give what I need. What ends up happening is the first pdf gets displayed twice. I think mainly because I display the first pdf onload, but when I click the button it agrees and grabs the first item from the database. And it ends up falling behind because its restarting the query and I cant quite figure out how to get the button to catch the first displayed pdf, or skip it entirely since I am using a welcome pdf. So on the welcome pdf that is supposed to be displayed initially the user clicks agree and it agrees to the welcome pdf instead of just skipping it. I am not quite sure how to just move past the pdf.
public sub onload()
display the welcome pdf
end sub
[CODE]...
Now if I run the code without the loop it works fine. I just end up having to run the app however many pdfs I have in my database.
query data
display data
insert data
Windows.Forms.Application.Exit()
To display pdfs I imported the com control for adobe so pdfs get displayed like this:
axacropdf1.src = my.mysettings.default.readpath & pdflocation
pdflocation is passed from a query fill.
I think I have an underlying design issue which probably precedes the loop.
Place Controls On An Form Using A Database For Locations?
Dec 24, 2011I am wanting to populate a form with check boxes and labels on starting of the app. My idea is to store to locations on the form in a database. I am creating an app that would have check boxes and labels that the user could check off to store points for completed tasks. The tasks on the form could change so I want the form to change as the tasks are changes with out re-coding the app.I am using VB 2003. I have searched but couldn't find anything.
View 2 RepliesProgram To Store X Number Of File Locations?
Apr 25, 2011As things are now, I need my program to store x number of file locations. My first approach was to use an array, however as i do now know how many files there will be, i am forced to use redim preserve. That is not very effective and I have therefore started using a StringCollection.
or is there some smart way to store these paths, that I have overlooked?
Use VB To Check Folder Locations And Registry Entries?
Apr 6, 2011I want to create a simple program that runs in the background that every few minutes checks to see if any additions to the "startup folders and or the registry entries that run programs. How do I make the value of these folders or registry entries variables?
View 1 RepliesVS 2008 Rectangle Of Control Locations (in A Panel)?
Jun 24, 2010I have a panel (A) which has movable panels (B) inside of it. How can I get a rectangle that contains all of the child panels (B)?
I tried to loop through the controls in the panel and get their x y height and width, find the highest, most to the right, most to the left, and lowest and put those numbers into a rectangle, but no luck.
WCF Failover - Publish In Two Locations One As The Primary Location
Jul 12, 2010I have created a WCF service that I would like to publish in two locations one as the primary location, the second as a backup. If the primary goes off line, I would like the clients to redirect to the secondary on timeout. The two locations are not in a cluster, in fact one machine is local the other is located on another site but on the same network. I don't want code, I just want to know what it is called and were to find information about it so I can implement it.
View 4 RepliesUse Vista Nwk Locations (XP Nwk Places) For Easy FTP Copy To Server?
Oct 7, 2009how to do it through my VBA code, or at least tell me which MSDN forum would know how?I've created a Vista "Network Location" (an XP "Network Place") which I'll call "portalToServer" which behaves as a kind of FTP portal into a web server.Manually, I can very easily drag a file (e.g., test.txt) from my destop and drop it onto this "portalToServer" object in my Computer folder, and magically a copy of the file is FTP'd to the server.How can I do this copy task programmatically in VBA???I have found that this object is actually stored in a folder at: [code] (or any variation that expands that explicitly, with or without trailing , with or without destination file name appended) returns a path not found error error 76, I think it was.(FYI, I've confirmed a line like ' FileCopy "C est.txt", "C: ext2. txt" 'does copy files.)I've also observed that if I use either a DOS window or the Run command (with CMD /c prefix) to do a COPY with those arguments, it reports success but actually fails.These DOS-like modes actually place a copy of the test.txt file in a "portalToServer" folder (in this example) on my PC which also contains a "target.lnk" file which I assume points to the FTP site on my server.(I can navigate to that into folder in the DOS window to see inside it.) I'm guessing the Windows GUI does some magic on any files dropped into that folder, but that magic is bypassed by the DOS windows or Run CMD instruction.
View 2 Replies