So I made my form transparent by changing the transparent key to dimgray, change background color to dimgray. I also changed the picture box's BG color to dimgray everything was fine except that the drop shadow on the picture I did was just a grey blob.Is there anyway to make the drop shadow look like its a drop shadow?
View 5 RepliesSo I came across this code that enables a drop shadow on a form in Visual Studio .NET 2008. The code is as follows:
Public
CS_DROPSHADOW As
Int32 = &H20000
[Code].....
I want to create a drop shadow on a group box though. What changes can I make to this and where must I insert it to do this?
How would I achieve a drop shadow effect around all edges of my Form?
View 9 RepliesI'm currently building an intranet engine for a project I've got on the go at the moment,and I'd like to save myself a little time by generating header images from code where possible, however, I'd like it to match our concept image.What I'd like to achieve is below:My issue is I've not the faintest how to create that from code. I can do the absolute basics but that's about it.I start to fall down when it comes to the gradient background and the drop shadow on the text. I can get away with positioning the text on the larger header image, so if it's not possible to generate the exact gradient I have there, then I have a work around for that, but what I really want to achieve is the text with the font and drop shadow.
View 1 Repliesis there a way to implement a win7 drop shadow style into border less form?
View 9 RepliesI have a custom WPF window defined as:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" MinHeight="300" Height="350" MinWidth="600" Width="700" ResizeMode="CanResizeWithGrip" AllowsTransparency="True" WindowStyle="None">
I found a class online that creates drop shadows, shown below. This works well, even with a resize grip, until I maximise the window. Once I maximise the window or change the window state of another window (eg. Visual Studio), I loose the drop shadow and I cannot get it back.
[Code]...
I have a code that takes the pink out of a image and makes it transperent. So its just the image no color around it. How do i make a shadow for that image like below to make it look like it has its own shadow?
View 9 RepliesI wanna put a shadow on my program!Its borderless, because ive used my own graphics.Does anybody have a clue how to add a shadow on the program?(I have made a shadow on the program before, but that didnt work out well, the background of the shadow went white, ive also used the transpacity key and stuff, didnt work)
I am using VB 2010, so if you got any idea's PLEASE let me know.
i used a code from here [URL]to get a shadow on my form but it is only on the right side and bottom i want the shadow to cover all four sides.
View 4 RepliesI would like to shadow/override an event in VB.NET. I do it only because I have to implement in this object an interface, that contains the same event like the base object itself, and I need to keep this base event as is it without modification nor supplementary event additions.How can I do it?
Public Shadows Event VisibleChanged As EventHandler Implements IVisibleChanged
So, I would like to implement a interface that contains VisibleChanged event, but to keep functional the myBase VisibleChanged event too.
[code].....
I would like to make sure that certain properties/methods of native framework methods are not called in a project I'm working on. I want to use custom methods instead, and make sure that those methods are always used. How would I do that?
These are the details:
In a rather large web project, we have several pieces of code creating and sending email messages using the MailMessage object. I want to perform some additional checking, logging etc whenever an email address is added to either the To, CC or BCC MailAddressCollection
of a MailMessage object. Basically I'd like to make sure that it is not possible, in this entire Solution, to do this: MyMailObject.To.Add(something@somwhere.com), and the same for "CC" and "BCC".
First, I thought about not using the MailMessage object at all, but inherit it and override the methods that allow adding of addresses. I ran into some trouble though when trying to shadow the "To" property, since "To" is a reserved word... And then I realized that it probably wouldn't solve my problem entirely anyway, since there would be nothing stopping another developer (or myself being stupid) from creating an instance of the original MailMessage class and use it at will.
I have successfully created a method which centralizes all the adding of various recipient addresses, but I can't figure out how to prevent the original methods from being used by mistake.
I am looking for a way to create Volume Shadow Copies of individual files. I have searched accross the net now for classes and code to use but I haven't been able to find anything. I'm only really starting out in .NET and C#, C++ or any other language for that matter are completely alien to me. Everything I've found on the subject, even from Microsoft VSS SDK is either in C# or in C++. I don't want to use any external programs, everything must run from the single exe file.
Target End Result:
I'd like a file at "\global\class\VSSClass.vb" that houses all the code needed.
Public objVSSClassObject As New VSSClass
For in-line code I'd like it as streamined as possible as it will be used with arrays of pre-set filenames.
objVSSClassObject.CopyFile(srcFile, dstDirectory)
Here's a sample of how the code would be used.
Public VSS As New VSSClass
Dim dstDirectory = My.Computer.FileSystem.SpecialDirectories.Desktop & "\Shadow Files"
Dim FilesArray() As String = {"absolute_path_to_file1.txt", _
[code]...
I want to disable the shadow underneath the standard tool tip ... is this possible?
I want to do this as i want to owner draw it ... and not have it square (as the shadow is ... even when owner drawing )
Is there a way to remove the LineShape shadow effect when selecting the lineShape? I tried
Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs)
Dim g As Graphics = e.Graphics
g.SmoothingMode = SmoothingMode.AntiAlias
Dim oldmode As SmoothingMode = g.SmoothingMode
g.DrawLine(_Pen, X1, Y1, X2, Y2)
g.SmoothingMode = oldmode
End Sub
but finally, this have some back effects on invalidation: when moving (in a panel) the line leave traces - does not invalidate properly.
I tried to skin my application and failed. I can get it to work if I don�t have semi transparent pixels on the outside of my form. But I want to use a skin I found on Deviant art that was made for Miranda. It is really nice but and it has a shadow around it. To get it to work in vb.net (I�m using 2005 btw) I have to fill around the main picture and take out the initializing (I think that is what it is called). But then the form�s edges are choppy. How does Miranda allow the shadows but I can�t in vb.net?
I first tried to do it the easy way. I set up some transparent panels with transparent pictureboxes in them and put my corners and middle fills as the backgrounds. I made the form with no border and set the transparent key to transparent. That didn�t work, so I made the form magenta and the transparent key magenta. The outside of the for where the shadow is was drawn on the magenta and the magenta bled through. So I edited the png�s to be magenta all around the form (eliminating the shadows) and it worked, but the corners were choppy.
Then tried some code I found on the net that tried to make a new control as a transparent panel. It was overriding the paint events and drawing to an off screen bitmap. I really didn't understand it and it just showed up as a blank screen. There has to be a way to do this.
Is there any ways to hide/shadow MyBase's properties?
Such as MyBase.Location, MyBase.Font?
When I try to declare a local "Height" properly, VS prompts me warning to use "Overloads" instead. But when in form designer/control test run, I still see this property, or any other properties (BorderStyle) which I tried to hide.
Im using now this code to make shadow for my square backgrounds.
[Code]...
How can i add an aero form shadow/glow effect to my controls?
View 2 RepliesI show forms in a SplitContainer Panel, but since the FormBorderStyle is set to none I'd like to apply a drop shadow. The following code works perfect if the form is not inside the panel
Protected Overrides ReadOnly Property CreateParams() As System.Windows.Forms.CreateParams
Get
[Code].....
I found that if using ArrayList, all clone/CopyTo/Add command are shadow copy, not separate copy. How can I do such that after an ArrayList A is "copied" to ArrayList B, change in ArrayList A will not reflect to ArrayList B?
View 1 Repliesin my on the job training i need to develop a program (webinterface in later stage) that is able to work with the volume shadow copy service.after about a month of research i have found about nothing about how to program it using the sdk or something like that.so now im asking on forums if there is anyone who has experience with using it in own programs.so what does it have to do?first i would like to be able to get information about a volume that uses VSS. information like how many copy's were made, when were those copy's created. what files are included in the copy.my prefered langauge is C# but im not affraid to learn (more) about VB or C++
View 1 Replieshow can i add an aero form shadow/glow effect to my controls?(i mean the shadow/glow around an aero form)
View 3 RepliesI have a little problem with the shadow of a button when in popup style. [code] This fat border only disappear if I click another button; then the fat border is instead on that button. I'm sure this is by design, but I want this button style without this "feature". Is it possible to avoid the remaining border shadow behavior?
View 2 RepliesI am trying to solve an issue in my application where the following exception is occurring: there is already an open datareader associated with this command which must be closed first. I am using TableAdapters, which maintain their own DataReaders, and everything seems to work fine unless I am interacting with one of my background workers.
In my code, I shadow the Item property of my collections so that I can retrieve the actual data from the database if needed. Here is a sample:
[code]...
Now each reference to the Item get property instantiates its own DataAdapter, so I am confused as to how the same DataReader will ever be used in this scenario. Is there something I am missing? All the TableAdapters do in fact use the same connection object, but I wouldn't think that would be a problem
I'm writing an Excel file recovery program with VB.Net that tries to be a convenient place to gather and access Microsoft's recommended methods. If your interested in my probably kludgy, error filled, and lacking enough cleanup code it's here: http:[url]..... The basic functionality seems to work although I haven't tested graph macro table recovery yet.
It occurred to me that Vista and Windows 7 users could benefit from being offered a list of previous versions of the file within my application if the Shadow Copy Service is on and there are previous copies. How do I do this?I looked at a lot of web pages but found no easy to crib code. One possibility I guess would be to use vssadmin via the shell but that is pretty cumbersome. I just want to display a dialogue box like the Previous Versions property sheet and allow users to pick one of the previous versions. I guess I could just display the previous version property sheet via the shell by programmatically invoking the context menu and the "Restore previous versions choice", however I also want to be able to offer the list for Vista Home Basic and Premium Users who don't have access to that tab even though apparently the previous versions still exist. Additionally if it possible I would like to offer XP users the same functionality although I'm pretty sure with XP only the System files are in the shadow copies.
I looked at MSDN on the Shadow Copy Service and went through all the pages, I also looked at AlphaVSS and AlphaFS and all the comments. I'm kind of guessing that I need to use AlphaVss and AlphFS and do the following?Find out the list of snapshots/restore points that exist on the computer.Mount those snapshots.Navigate in the mounted volumes to the Excel file the user wants to recover and make a list of those paths.With the list of paths handy, compare with some kind of diff program, the shadow copies of the files with the original.Pull out the youngest or oldest version (I don't think it matters) of those shadow copies that differ from the recovery target.List those versions of the files that are found to be different.This seems cumbersome and slow, but maybe is the fastest way to do things. I just need some confirmation that is the way to go now.
I'm trying to create a shaped form with an attractive shadow effect by painting progressive alpha blended layers underneath the main visible form area (a background mask color has also been set to allow a shaped form). This is going well, but I have one major problem to resolve - the bottom shadow layer does not appear as the correct transparent shade - it always appears solidly as the background color / transparent mask color for the form.
Why does this bottom shadow layer not show up as transparent, and why is this color being shown when it is set as the transparency key for the form (and so should be invisible anyway)???[URL]..
Is it possible to reorder the elements of a drop down list (combobox) via drag and drop?For example, when the list is dropped down, I want the user to be able to drag the items up or down to reorder them. I tried this (and some google searching) but I'm wondering if its just not possible:
Private Sub cmbClassLists_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles cmbClassLists.MouseDown
If cmbClassLists.DroppedDown And Not cmbClassLists.SelectedIndex = -1 Then
[code].....
ComboBox drop up instead of drop down..i want to defualt for a particular drop down box to work this way how can i do it.
View 6 RepliesHow Can I make a drop-down box, like a combobox, display all fonts on your computer?
View 18 RepliesI'm creating a simulation programe. In one sheet I have a group of cells (AngleConf) that have a drop down list. I would like to make some operations when I change the value of one of these cells. It always works when I insert the new value manually. But it doesn't always works when I change it by selecting the value from the list. I supose that that happens because of some option that I change while I'm working but I can't find out witch one exactly.The code that I think that its implicated:
Sub Worksheet_Change(ByVal Target As Range)
If InRange(Target, Range("AngleConf")) Then
Call resistance 'Actualiser le r�sultat mecanique
[code].....