I found the source of the issue i did not explain it very well. Basically i have a form with a compare validator that makes sure my txtstartdate is not less than my txtenddate. So these 2 text boxes have ajax calendar attached to it and when I select those 2 my compare validator appears and gives an error.
[Code]....
I have a custom validator in which the script validating the control is client-side javascript. In my VB code behind for the website I call Page.Validate("groupName") but my validation script is not fired at all. I placed a break point in my javascript, but it's not even touching my validation script. While when i use the same function on non-custom validators it works.
I am thinking that it is impossibly to call my client-side validation script in my VB behind code via Page.Validate("groupName"). Do I absolutely need a server-side validation function?
Here's a bit of code:
[Code]...
How to use control validators in vb.net window forms.....
View 1 RepliesI have 3 different validation groups on my web page, but when I click submit I want all of the groups to validate? It seems to me like the causesValidation="true" of the button will not validate the validators that are in their own validation group. So right now I am calling a javascript function that manually validates the groups.
[Code]...
Now this works fine and dandy... But it seemed to me like before I had all the groups on the page the validators where much faster than how it has to validate them now. Is there something special i have to do to my button to get all of the groups to fire when it is clicked without the help of this javascript function?
When I have a property within a class such as:
''' <summary>
''' Customer IP address.
''' </summary>
[code].....
I have a form to register new users for my site and their are required field validators on the page.
I want to include a cancel button that redirects the form to the main page but unless the required field validatiors are satisfied it will not run the code when the cancel button is hit.
How can I have the code for the cancel button run even if the form is not fully filled out?
I'm trying to figure out a way to validate the user data entered:
[Code]...
This is in MVC3, VB.net. I'm looking for an easy way to validate a users input data into the editorfor field.
My code was working fine when I tried with 3 columns. Now, when I mode columns (13) it throws the error.
View 4 Repliesi'm using microsoft visual studion 2008.
View 3 RepliesI have a VB6 DLL that wraps a call to a 3rd party component. When I call my DLL from VB6, everything works fine, but when I call it from vb.net (2.0 framework targeted - VS2010) I get this error:
AccessViolationException occurred
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.This error only occurs on Windows 7 (Windows XP clients work fine).I've looked this up and all the articles I found talked about the declaration not being correct.I am not declaring any APIs calls though, the 3rd party component is early bound in my VB6 DLL.I can run the DLL, set a breakpoint,and it goes into my VB6 function, but errors calling a function in the 3rd party component.My VB6 DLL takes 3 string and one 32bit numeric (long in VB6) parameters. The 3rd party's DLL function that I am calling is taking a string (bstrDNSID as string is what Intellisense shows in VB6). This is where it errors.
Update: None of the marshalling has helped, so I tried creating a test sub in my VB6 DLL. I hardcoded all the values within the DLL's test sub. It works fine when called from VB6, but gives the same error as above when running from .NET. Also of interest, when I have the VB6 DLL running from the VB6 IDE, I do not get the error when calling the DLL from .NET.
I am trying to create a log file to log when an exception occurs (if it does) and what exceptions occured. I have posted the code I have so far. What I would like to do is be able to set the path I want it to go to (ie: C:VB ProjectLogs). I can run my code with the current Logging code but cannot find the file. Is there some sort of create command i need to use first?
Sub LogWrite(ByVal ex)
Dim time As String
Dim Path As Microsoft.VisualBasic.Logging.LogFileLocation
[code]....
I have an error appearing in my webbrowser, and as there doesn't seem to be a solution to stopping it, i'm attempting to just detect when it occurs, and use sendkeys to press enter.[code]..
View 8 RepliesI have a system with 26 buttons but the buttons actaully run the same code; aside from the fact that the index number is used to distinguish between them (es, I know index values are out so I am using the object's name (btnKey1, btnKey2, etc).
Is there any event that occurs for all button presses or do I need to write the same line for all 26 events (actually 52 since I am using MouseDown and MouseUp - will get worse when I want to use the keypress side)?
Right now I have a program that checks login credentials against my Access(2003) database.It works, but the problem I'm having is that it's checking if the file.exist to frequently and with no real pattern. How I'm doing it isI have a My.Setting that saves the file path string as well as the connection string, during form_load I check if the My.Setting path string exist, if not then use an openfiledialog to find the file. Right now I have the database in a public drive, which is why I think that my program thinks that the file doesn't exist sometimes. This is how I'm doing all of the above:
'Some global variables commented out
'Dim log As String = My.Settings.loginStr
'Dim logCon As String = My.Settings.loginCon
[code].....
I am working on a program that opens forms from within the startup form. It is doing nothing usual that I am aware of. It was working fine an hour ago but now when I try to open one particular form I get the InvalidOperationException and I have no idea why. I've rebuilt the project, restarted VS2008 and restarted the computer. The other forms open without any trouble.
View 1 RepliesI have a program that a textbox pops up for 30 sec. What I want to do is this: Have it go away after 30 sec if the user does not enter anything in it and hit return of click the ok button. But if they DO I want the timer to reset back to 30 sec. I have tried disabling and enabling the timer event--- sending a new interval, and spent some time looking in the Forums.
View 2 RepliesI wanted a Message Box to appear when a file can't be found, for example. I made a Combo Box (ComboBox1) and a button, this is what the code was:[code]If a file can't be found, I want a message box to appear, not an Error Provider, I tried this code, but it did not work:[code]
View 2 RepliesMy asp.net website logs errors when they occur, but only sometimes shows the line of code where it occurred. Is there a way to find out what line of code my error is occuring on when the line is not provided?My Global.asax logs the error with the following code:
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
'Get MemberNumber
Dim MemberNumber As String
[code]....
It looks like the checkbox labeled "ckAdmin" is causing this error, but I do not know how to trace it. How should I go about tracing down this error or finding the line of the code this error occurs in?
I have a very simple table in access. The data is stored from VB.NET using the OLEDB adapter. I have a second form which has just a single DataGridView which was dragged/dropped using VS2010 from the Data Sources window.When trying to view the window the first time no data is shown and the second time an exception occurs and the program closes.
[code]...
In the Immediate window after clicking the Form.ShowDialog() button this message appears: A first chance exception of type 'System.ArgumentException' occurred in System.Data.dll Also, the data does not load into the datagridview. After closing the window and then clicking the same button (Not data has been changed at all) this error appears: Input string was not in a correct format.Couldn't store <07/11/2011 00:55:06> in Time Column. Expected type is Int32.
i am retrieving data using data reader. Whenever a null value fetches from the column, the compiler encountering an error. The error occurs when column value contains NULL. I am using Visual Basic 2005.
Please look at the following error which is in red color:
DEVNA11.Checked = IIf(IsDBNull(dr("dev_serv_desc_final_na")), 0, dr("dev_serv_desc_final_na"))
txtPlanServDesFinal.Text = IIf(IsDate(dr("dev_serv_desc_final_planned")), Format(dr("dev_serv_desc_final_planned"), "dd/MM/yyy"), dr("dev_serv_desc_final_planned"))
System.ArgumentException: Argument 'Expression' is not a valid value.
I have developed serial port communication application using vb 2008 with serial port class.
Previously everything was ok. Now a days error occurs when closing serial port.
At the time of closing there is no receiving data .
Error is "The i/o operation has been aborted because of either a thread exit or an application request"
I am having an issues with my code causing my forum to close after an error occurs during a SaveFileDialog. My problem is if the form closes after an error occurs that doesn't save the file, the person would lose their text they made. If there a way I can embed the code in an If statement or Try catch so it only closes if the file was saved? Here is my
[Code]...
I am currently using Snarl to generate notifications whenever an event / error occurs in my program. How would I go about coding a native VB notification instead of using a 3rd party program?
View 3 Repliesif the rows CurTXId is 0 then I insert new records. and then call AcceptChanges on the PeopleTable.now if I have an error, for example conversion from null to Decimal causes an error and the first insert occurs before the error. now i have a row inserted but AcceptChanges hasn't been called yet.then i click save again and the insert happens again since the rowstate hasn't changed.how should I handle this?[code]
View 2 RepliesAs part of a review of my program on Softpedia, the Reviewer stated the following: If you call on a piece of software and it is not installed on your computer the application will pop up a nasty error message that may discourage beginners. Popping a dialog saying the reason of the error or that the software is not installed on the system would be a great fix.
View 5 Replieshow to trigger a refresh on a form when an update occurs in my business logic.
This isn't an issue for 95% of my forms because they call the update from the form that needs to be updated. However, In some cases an inner form does and update that requires an outer form to reflect this. I've read about Handles, Delegates, AddressOf etc etc and I'm drowning in options.
In simple terms, I need three things to happen
1. Form2 (inner form) has updated info, so the user clicks Save
2. Save calls my Data Access Layer and updates the database
3. Form1 (outer form) has a DataGrid that needs to be notified so it can update via a Sub LoadGrid
It's stage 3 I can't do. How do I trigger a Sub in Form2 (LoadGrid) to do the refresh from an external class.
I have a fairly complex application which makes use of an MS Access database. My application generates some 14million entries and inserts them after each generation, into the database. The app works perfectly without any bugs(that I am aware of) apart from one problem. If I run the app and let it run the full 14million odd data entries, the app crashes some way through and gives an Out of Memory exception.
I then loaded up TaskManager and notice that the memory usage increases by about 8-15Kb per second. I have done some reading and have tried using Dispose() to get rid of any objects finished with, I have tried building in release mode and the problem remains. I'm not even really sure if it is a memory leak or something else. I am using VS2010 and my application is running in .net 4.0.
I have 2 tables loginInfo and UserInfo. LoginInfo Stores username and passwords while userinfo stores other user details such as Address,postalcode,phone etc.
I insert values into loginInfo first and if successful I enter the userInfo details. If exception occurs while entering details into userInfo i delete the loginInfo details.
This is how I do now
'login details are entered successfully
If CreateLogin(uName.uPass) Then
Try
'Create the user details
[Code]...
Is there a better way to deal with this situation? can use Transactions?
So, concering my project: I am trying to control an RC Car via Kinect, until now I got it working with key control only (eg WASD). So, I am using a Velleman K8055 Interface Board + the Kinect and VB Windows Forms. So far, so good, I created 4 Forms: menu, info, kinect-controls + wasdcontrols window. The error only occurs for my kinect-controls window (german name: Steuerung.vb) & that's my source
[Code]...
I have an application where I make calls to multiple SQL Server Stored Procedures,keep the user aware that the program is still running and how long the specific SP has been running so that they can abort it if it's taking too long.
My initial attempt was to wrap up each call to the SPs like this example:
Dim cm As SqlCommand = Nothing
Dim Conn As SqlConnection = Nothing
Dim Tran As SqlTransaction = Nothing
Dim PrevTime As Date = Nothing
[Code]...